Commit ec97faff authored by Icenowy Zheng's avatar Icenowy Zheng Committed by Maxime Ripard

clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock

The A64 PLL_CPU clock has the same instability if some factor changed
without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33,
H3.

Add the mux and pll notifiers for A64 CPU clock to workaround the
problem.

Fixes: c6a06374 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: default avatarIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: default avatarVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
parent b406cadb
......@@ -921,11 +921,26 @@ static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = {
.num_resets = ARRAY_SIZE(sun50i_a64_ccu_resets),
};
static struct ccu_pll_nb sun50i_a64_pll_cpu_nb = {
.common = &pll_cpux_clk.common,
/* copy from pll_cpux_clk */
.enable = BIT(31),
.lock = BIT(28),
};
static struct ccu_mux_nb sun50i_a64_cpu_nb = {
.common = &cpux_clk.common,
.cm = &cpux_clk.mux,
.delay_us = 1, /* > 8 clock cycles at 24 MHz */
.bypass_index = 1, /* index of 24 MHz oscillator */
};
static int sun50i_a64_ccu_probe(struct platform_device *pdev)
{
struct resource *res;
void __iomem *reg;
u32 val;
int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg = devm_ioremap_resource(&pdev->dev, res);
......@@ -939,7 +954,18 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev)
writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
if (ret)
return ret;
/* Gate then ungate PLL CPU after any rate changes */
ccu_pll_notifier_register(&sun50i_a64_pll_cpu_nb);
/* Reparent CPU during PLL CPU rate changes */
ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
&sun50i_a64_cpu_nb);
return 0;
}
static const struct of_device_id sun50i_a64_ccu_ids[] = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment