Merge tag 'drm-intel-fixes-2014-06-06' of git://anongit.freedesktop.org/drm-intel into drm-next

> Bunch of stuff for 3.16 still:
> - Mipi dsi panel support for byt. Finally! From Shobhit&others. I've
>   squeezed this in since it's a regression compared to vbios and we've
>   been ridiculed about it a bit too often ...
> - connection_mutex deadlock fix in get_connector (only affects i915).
> - Core patches from Matt's primary plane from Matt Roper, I've pushed the
>   i915 stuff to 3.17.
> - vlv power well sequencing fixes from Jesse.
> - Fix for cursor size changes from Chris.
> - agpbusy fixes from Ville.
> - A few smaller things.
>

* tag 'drm-intel-fixes-2014-06-06' of git://anongit.freedesktop.org/drm-intel: (32 commits)
  drm/i915: BDW: Adding missing cursor offsets.
  drm: Fix getconnector connection_mutex locking
  drm/i915/bdw: Only use 2g GGTT for 32b platforms
  drm/i915: Nuke pipe A quirk on i830M
  drm/i915: fix display power sw state reporting
  drm/i915: Always apply cursor width changes
  drm/i915: tell the user if both KMS and UMS are disabled
  drm/plane-helper: Add drm_plane_helper_check_update() (v3)
  drm: Check CRTC compatibility in setplane
  drm/i915: use VBT to determine whether to enumerate the VGA port
  drm/i915: Don't WARN about ring idle bit on gen2
  drm/i915: Silence the WARN if the user tries to GTT mmap an incoherent object
  drm/i915: Move the C3 LP write bit setup to gen3_init_clock_gating() for KMS
  drm/i915: Enable interrupt-based AGPBUSY# enable on 85x
  drm/i915: Flip the sense of AGPBUSY_DIS bit
  drm/i915: Set AGPBUSY# bit in init_clock_gating
  drm/i915/vlv: add pll assertion when disabling DPIO common well
  drm/i915/vlv: move DPIO common reset de-assert into __vlv_set_power_well
  drm/i915/vlv: re-order power wells so DPIO common comes after TX
  drm/i915/vlv: move CRI refclk enable into __vlv_set_power_well
  ...

drivers/gpu/drm/drm_crtc.c

@@ -2178,6 +2178,13 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
 		goto out;
 	}
 
+	/* Check whether this plane is usable on this CRTC */
+	if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
+		DRM_DEBUG_KMS("Invalid crtc for plane\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
 	fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
 	if (!fb) {
 		DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",

drivers/gpu/drm/drm_plane_helper.c

@@ -25,6 +25,7 @@
 
 #include <linux/list.h>
 #include <drm/drmP.h>
+#include <drm/drm_plane_helper.h>
 #include <drm/drm_rect.h>
 #include <drm/drm_plane_helper.h>
 
@@ -73,6 +74,79 @@ static int get_connectors_for_crtc(struct drm_crtc *crtc,
 	return count;
 }
 
+/**
+ * drm_plane_helper_check_update() - Check plane update for validity
+ * @plane: plane object to update
+ * @crtc: owning CRTC of owning plane
+ * @fb: framebuffer to flip onto plane
+ * @src: source coordinates in 16.16 fixed point
+ * @dest: integer destination coordinates
+ * @clip: integer clipping coordinates
+ * @min_scale: minimum @src:@dest scaling factor in 16.16 fixed point
+ * @max_scale: maximum @src:@dest scaling factor in 16.16 fixed point
+ * @can_position: is it legal to position the plane such that it
+ *                doesn't cover the entire crtc?  This will generally
+ *                only be false for primary planes.
+ * @can_update_disabled: can the plane be updated while the crtc
+ *                       is disabled?
+ * @visible: output parameter indicating whether plane is still visible after
+ *           clipping
+ *
+ * Checks that a desired plane update is valid.  Drivers that provide
+ * their own plane handling rather than helper-provided implementations may
+ * still wish to call this function to avoid duplication of error checking
+ * code.
+ *
+ * RETURNS:
+ * Zero if update appears valid, error code on failure
+ */
+int drm_plane_helper_check_update(struct drm_plane *plane,
+				    struct drm_crtc *crtc,
+				    struct drm_framebuffer *fb,
+				    struct drm_rect *src,
+				    struct drm_rect *dest,
+				    const struct drm_rect *clip,
+				    int min_scale,
+				    int max_scale,
+				    bool can_position,
+				    bool can_update_disabled,
+				    bool *visible)
+{
+	int hscale, vscale;
+
+	if (!crtc->enabled && !can_update_disabled) {
+		DRM_DEBUG_KMS("Cannot update plane of a disabled CRTC.\n");
+		return -EINVAL;
+	}
+
+	/* Check scaling */
+	hscale = drm_rect_calc_hscale(src, dest, min_scale, max_scale);
+	vscale = drm_rect_calc_vscale(src, dest, min_scale, max_scale);
+	if (hscale < 0 || vscale < 0) {
+		DRM_DEBUG_KMS("Invalid scaling of plane\n");
+		return -ERANGE;
+	}
+
+	*visible = drm_rect_clip_scaled(src, dest, clip, hscale, vscale);
+	if (!*visible)
+		/*
+		 * Plane isn't visible; some drivers can handle this
+		 * so we just return success here.  Drivers that can't
+		 * (including those that use the primary plane helper's
+		 * update function) will return an error from their
+		 * update_plane handler.
+		 */
+		return 0;
+
+	if (!can_position && !drm_rect_equals(dest, clip)) {
+		DRM_DEBUG_KMS("Plane must cover entire CRTC\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_plane_helper_check_update);
+
 /**
  * drm_primary_helper_update() - Helper for primary plane update
  * @plane: plane object to update
@@ -121,57 +195,42 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
 		.x = src_x >> 16,
 		.y = src_y >> 16,
 	};
+	struct drm_rect src = {
+		.x1 = src_x,
+		.y1 = src_y,
+		.x2 = src_x + src_w,
+		.y2 = src_y + src_h,
+	};
 	struct drm_rect dest = {
 		.x1 = crtc_x,
 		.y1 = crtc_y,
 		.x2 = crtc_x + crtc_w,
 		.y2 = crtc_y + crtc_h,
 	};
-	struct drm_rect clip = {
+	const struct drm_rect clip = {
 		.x2 = crtc->mode.hdisplay,
 		.y2 = crtc->mode.vdisplay,
 	};
 	struct drm_connector **connector_list;
 	int num_connectors, ret;
+	bool visible;
 
-	if (!crtc->enabled) {
-		DRM_DEBUG_KMS("Cannot update primary plane of a disabled CRTC.\n");
-		return -EINVAL;
-	}
-
-	/* Disallow subpixel positioning */
-	if ((src_x | src_y | src_w | src_h) & SUBPIXEL_MASK) {
-		DRM_DEBUG_KMS("Primary plane does not support subpixel positioning\n");
-		return -EINVAL;
-	}
-
-	/* Primary planes are locked to their owning CRTC */
-	if (plane->possible_crtcs != drm_crtc_mask(crtc)) {
-		DRM_DEBUG_KMS("Cannot change primary plane CRTC\n");
-		return -EINVAL;
-	}
-
-	/* Disallow scaling */
-	src_w >>= 16;
-	src_h >>= 16;
-	if (crtc_w != src_w || crtc_h != src_h) {
-		DRM_DEBUG_KMS("Can't scale primary plane\n");
-		return -EINVAL;
-	}
-
-	/* Make sure primary plane covers entire CRTC */
-	drm_rect_intersect(&dest, &clip);
-	if (dest.x1 != 0 || dest.y1 != 0 ||
-	    dest.x2 != crtc->mode.hdisplay || dest.y2 != crtc->mode.vdisplay) {
-		DRM_DEBUG_KMS("Primary plane must cover entire CRTC\n");
-		return -EINVAL;
-	}
-
-	/* Framebuffer must be big enough to cover entire plane */
-	ret = drm_crtc_check_viewport(crtc, crtc_x, crtc_y, &crtc->mode, fb);
+	ret = drm_plane_helper_check_update(plane, crtc, fb,
+					    &src, &dest, &clip,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    false, false, &visible);
 	if (ret)
 		return ret;
 
+	if (!visible)
+		/*
+		 * Primary plane isn't visible.  Note that unless a driver
+		 * provides their own disable function, this will just
+		 * wind up returning -EINVAL to userspace.
+		 */
+		return plane->funcs->disable_plane(plane);
+
 	/* Find current connectors for CRTC */
 	num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
 	BUG_ON(num_connectors == 0);

drivers/gpu/drm/i915/Makefile

@@ -62,6 +62,7 @@ i915-y += dvo_ch7017.o \
 	  intel_dsi_cmd.o \
 	  intel_dsi.o \
 	  intel_dsi_pll.o \
+	  intel_dsi_panel_vbt.o \
 	  intel_dvo.o \
 	  intel_hdmi.o \
 	  intel_i2c.o \

drivers/gpu/drm/i915/i915_debugfs.c

@@ -2353,10 +2353,14 @@ static int i915_display_info(struct seq_file *m, void *unused)
 
 			active = cursor_position(dev, crtc->pipe, &x, &y);
 			seq_printf(m, "\tcursor visible? %s, position (%d, %d), addr 0x%08x, active? %s\n",
-				   yesno(crtc->cursor_visible),
+				   yesno(crtc->cursor_base),
 				   x, y, crtc->cursor_addr,
 				   yesno(active));
 		}
+
+		seq_printf(m, "\tunderrun reporting: cpu=%s pch=%s \n",
+			   yesno(!crtc->cpu_fifo_underrun_disabled),
+			   yesno(!crtc->pch_fifo_underrun_disabled));
 	}
 
 	seq_printf(m, "\n");

drivers/gpu/drm/i915/i915_drv.c

@@ -321,6 +321,7 @@ static const struct intel_device_info intel_broadwell_m_info = {
 	.has_ddi = 1,
 	.has_fbc = 1,
 	GEN_DEFAULT_PIPEOFFSETS,
+	IVB_CURSOR_OFFSETS,
 };
 
 static const struct intel_device_info intel_broadwell_gt3d_info = {
@@ -331,6 +332,7 @@ static const struct intel_device_info intel_broadwell_gt3d_info = {
 	.has_ddi = 1,
 	.has_fbc = 1,
 	GEN_DEFAULT_PIPEOFFSETS,
+	IVB_CURSOR_OFFSETS,
 };
 
 static const struct intel_device_info intel_broadwell_gt3m_info = {
@@ -811,17 +813,17 @@ int i915_reset(struct drm_device *dev)
 		}
 
 		/*
-		 * FIXME: This is horribly race against concurrent pageflip and
-		 * vblank wait ioctls since they can observe dev->irqs_disabled
-		 * being false when they shouldn't be able to.
+		 * FIXME: This races pretty badly against concurrent holders of
+		 * ring interrupts. This is possible since we've started to drop
+		 * dev->struct_mutex in select places when waiting for the gpu.
 		 */
-		drm_irq_uninstall(dev);
-		drm_irq_install(dev, dev->pdev->irq);
 
-		/* rps/rc6 re-init is necessary to restore state lost after the
-		 * reset and the re-install of drm irq. Skip for ironlake per
+		/*
+		 * rps/rc6 re-init is necessary to restore state lost after the
+		 * reset and the re-install of gt irqs. Skip for ironlake per
 		 * previous concerns that it doesn't respond well to some forms
-		 * of re-init after reset. */
+		 * of re-init after reset.
+		 */
 		if (INTEL_INFO(dev)->gen > 5)
 			intel_reset_gt_powersave(dev);
 
@@ -1583,6 +1585,7 @@ static int __init i915_init(void)
 		driver.get_vblank_timestamp = NULL;
 #ifndef CONFIG_DRM_I915_UMS
 		/* Silently fail loading to not upset userspace. */
+		DRM_DEBUG_DRIVER("KMS and UMS disabled.\n");
 		return 0;
 #endif
 	}

drivers/gpu/drm/i915/i915_drv.h

@@ -1207,6 +1207,7 @@ struct intel_vbt_data {
 	unsigned int lvds_use_ssc:1;
 	unsigned int display_clock_mode:1;
 	unsigned int fdi_rx_polarity_inverted:1;
+	unsigned int has_mipi:1;
 	int lvds_ssc_freq;
 	unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
 
@@ -1230,6 +1231,7 @@ struct intel_vbt_data {
 
 	/* MIPI DSI */
 	struct {
+		u16 port;
 		u16 panel_id;
 		struct mipi_config *config;
 		struct mipi_pps_data *pps;

drivers/gpu/drm/i915/i915_gem.c

@@ -1544,7 +1544,7 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 
 	/* Access to snoopable pages through the GTT is incoherent. */
 	if (obj->cache_level != I915_CACHE_NONE && !HAS_LLC(dev)) {
-		ret = -EINVAL;
+		ret = -EFAULT;
 		goto unlock;
 	}
 
@@ -4894,7 +4894,7 @@ i915_gem_load(struct drm_device *dev)
 	init_waitqueue_head(&dev_priv->gpu_error.reset_queue);
 
 	/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
-	if (IS_GEN3(dev)) {
+	if (!drm_core_check_feature(dev, DRIVER_MODESET) && IS_GEN3(dev)) {
 		I915_WRITE(MI_ARB_STATE,
 			   _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE));
 	}

drivers/gpu/drm/i915/i915_gem_gtt.c

@@ -1775,6 +1775,13 @@ static inline unsigned int gen8_get_total_gtt_size(u16 bdw_gmch_ctl)
 	bdw_gmch_ctl &= BDW_GMCH_GGMS_MASK;
 	if (bdw_gmch_ctl)
 		bdw_gmch_ctl = 1 << bdw_gmch_ctl;
+
+#ifdef CONFIG_X86_32
+	/* Limit 32b platforms to a 2GB GGTT: 4 << 20 / pte size * PAGE_SIZE */
+	if (bdw_gmch_ctl > 4)
+		bdw_gmch_ctl = 4;
+#endif
+
 	return bdw_gmch_ctl << 20;
 }
 

drivers/gpu/drm/i915/i915_irq.c

@@ -335,7 +335,8 @@ void i9xx_check_fifo_underruns(struct drm_device *dev)
 }
 
 static void i9xx_set_fifo_underrun_reporting(struct drm_device *dev,
-					     enum pipe pipe, bool enable)
+					     enum pipe pipe,
+					     bool enable, bool old)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 reg = PIPESTAT(pipe);
@@ -347,7 +348,7 @@ static void i9xx_set_fifo_underrun_reporting(struct drm_device *dev,
 		I915_WRITE(reg, pipestat | PIPE_FIFO_UNDERRUN_STATUS);
 		POSTING_READ(reg);
 	} else {
-		if (pipestat & PIPE_FIFO_UNDERRUN_STATUS)
+		if (old && pipestat & PIPE_FIFO_UNDERRUN_STATUS)
 			DRM_ERROR("pipe %c underrun\n", pipe_name(pipe));
 	}
 }
@@ -366,7 +367,8 @@ static void ironlake_set_fifo_underrun_reporting(struct drm_device *dev,
 }
 
 static void ivybridge_set_fifo_underrun_reporting(struct drm_device *dev,
-						  enum pipe pipe, bool enable)
+						  enum pipe pipe,
+						  bool enable, bool old)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	if (enable) {
@@ -379,7 +381,8 @@ static void ivybridge_set_fifo_underrun_reporting(struct drm_device *dev,
 	} else {
 		ironlake_disable_display_irq(dev_priv, DE_ERR_INT_IVB);
 
-		if (I915_READ(GEN7_ERR_INT) & ERR_INT_FIFO_UNDERRUN(pipe)) {
+		if (old &&
+		    I915_READ(GEN7_ERR_INT) & ERR_INT_FIFO_UNDERRUN(pipe)) {
 			DRM_ERROR("uncleared fifo underrun on pipe %c\n",
 				  pipe_name(pipe));
 		}
@@ -444,7 +447,7 @@ static void ibx_set_fifo_underrun_reporting(struct drm_device *dev,
 
 static void cpt_set_fifo_underrun_reporting(struct drm_device *dev,
 					    enum transcoder pch_transcoder,
-					    bool enable)
+					    bool enable, bool old)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
@@ -459,7 +462,8 @@ static void cpt_set_fifo_underrun_reporting(struct drm_device *dev,
 	} else {
 		ibx_disable_display_interrupt(dev_priv, SDE_ERROR_CPT);
 
-		if (I915_READ(SERR_INT) & SERR_INT_TRANS_FIFO_UNDERRUN(pch_transcoder)) {
+		if (old && I915_READ(SERR_INT) &
+		    SERR_INT_TRANS_FIFO_UNDERRUN(pch_transcoder)) {
 			DRM_ERROR("uncleared pch fifo underrun on pch transcoder %c\n",
 				  transcoder_name(pch_transcoder));
 		}
@@ -486,28 +490,23 @@ static bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	bool ret;
+	bool old;
 
 	assert_spin_locked(&dev_priv->irq_lock);
 
-	ret = !intel_crtc->cpu_fifo_underrun_disabled;
-
-	if (enable == ret)
-		goto done;
-
+	old = !intel_crtc->cpu_fifo_underrun_disabled;
 	intel_crtc->cpu_fifo_underrun_disabled = !enable;
 
 	if (INTEL_INFO(dev)->gen < 5 || IS_VALLEYVIEW(dev))
-		i9xx_set_fifo_underrun_reporting(dev, pipe, enable);
+		i9xx_set_fifo_underrun_reporting(dev, pipe, enable, old);
 	else if (IS_GEN5(dev) || IS_GEN6(dev))
 		ironlake_set_fifo_underrun_reporting(dev, pipe, enable);
 	else if (IS_GEN7(dev))
-		ivybridge_set_fifo_underrun_reporting(dev, pipe, enable);
+		ivybridge_set_fifo_underrun_reporting(dev, pipe, enable, old);
 	else if (IS_GEN8(dev))
 		broadwell_set_fifo_underrun_reporting(dev, pipe, enable);
 
-done:
-	return ret;
+	return old;
 }
 
 bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
@@ -556,7 +555,7 @@ bool intel_set_pch_fifo_underrun_reporting(struct drm_device *dev,
 	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pch_transcoder];
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	unsigned long flags;
-	bool ret;
+	bool old;
 
 	/*
 	 * NOTE: Pre-LPT has a fixed cpu pipe -> pch transcoder mapping, but LPT
@@ -569,21 +568,16 @@ bool intel_set_pch_fifo_underrun_reporting(struct drm_device *dev,
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
 
-	ret = !intel_crtc->pch_fifo_underrun_disabled;
-
-	if (enable == ret)
-		goto done;
-
+	old = !intel_crtc->pch_fifo_underrun_disabled;
 	intel_crtc->pch_fifo_underrun_disabled = !enable;
 
 	if (HAS_PCH_IBX(dev))
 		ibx_set_fifo_underrun_reporting(dev, pch_transcoder, enable);
 	else
-		cpt_set_fifo_underrun_reporting(dev, pch_transcoder, enable);
+		cpt_set_fifo_underrun_reporting(dev, pch_transcoder, enable, old);
 
-done:
 	spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
-	return ret;
+	return old;
 }
 
 
@@ -2634,10 +2628,6 @@ static int i915_enable_vblank(struct drm_device *dev, int pipe)
 	else
 		i915_enable_pipestat(dev_priv, pipe,
 				     PIPE_VBLANK_INTERRUPT_STATUS);
-
-	/* maintain vblank delivery even in deep C-states */
-	if (INTEL_INFO(dev)->gen == 3)
-		I915_WRITE(INSTPM, _MASKED_BIT_DISABLE(INSTPM_AGPBUSY_DIS));
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
 
 	return 0;
@@ -2701,9 +2691,6 @@ static void i915_disable_vblank(struct drm_device *dev, int pipe)
 	unsigned long irqflags;
 
 	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
-	if (INTEL_INFO(dev)->gen == 3)
-		I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_DIS));
-
 	i915_disable_pipestat(dev_priv, pipe,
 			      PIPE_VBLANK_INTERRUPT_STATUS |
 			      PIPE_START_VBLANK_INTERRUPT_STATUS);
@@ -3117,11 +3104,6 @@ static void ironlake_irq_reset(struct drm_device *dev)
 	ibx_irq_reset(dev);
 }
 
-static void ironlake_irq_preinstall(struct drm_device *dev)
-{
-	ironlake_irq_reset(dev);
-}
-
 static void valleyview_irq_preinstall(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3151,6 +3133,14 @@ static void valleyview_irq_preinstall(struct drm_device *dev)
 	POSTING_READ(VLV_IER);
 }
 
+static void gen8_gt_irq_reset(struct drm_i915_private *dev_priv)
+{
+	GEN8_IRQ_RESET_NDX(GT, 0);
+	GEN8_IRQ_RESET_NDX(GT, 1);
+	GEN8_IRQ_RESET_NDX(GT, 2);
+	GEN8_IRQ_RESET_NDX(GT, 3);
+}
+
 static void gen8_irq_reset(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3159,10 +3149,7 @@ static void gen8_irq_reset(struct drm_device *dev)
 	I915_WRITE(GEN8_MASTER_IRQ, 0);
 	POSTING_READ(GEN8_MASTER_IRQ);
 
-	GEN8_IRQ_RESET_NDX(GT, 0);
-	GEN8_IRQ_RESET_NDX(GT, 1);
-	GEN8_IRQ_RESET_NDX(GT, 2);
-	GEN8_IRQ_RESET_NDX(GT, 3);
+	gen8_gt_irq_reset(dev_priv);
 
 	for_each_pipe(pipe)
 		GEN8_IRQ_RESET_NDX(DE_PIPE, pipe);
@@ -3174,11 +3161,6 @@ static void gen8_irq_reset(struct drm_device *dev)
 	ibx_irq_reset(dev);
 }
 
-static void gen8_irq_preinstall(struct drm_device *dev)
-{
-	gen8_irq_reset(dev);
-}
-
 static void cherryview_irq_preinstall(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3187,10 +3169,7 @@ static void cherryview_irq_preinstall(struct drm_device *dev)
 	I915_WRITE(GEN8_MASTER_IRQ, 0);
 	POSTING_READ(GEN8_MASTER_IRQ);
 
-	GEN8_IRQ_RESET_NDX(GT, 0);
-	GEN8_IRQ_RESET_NDX(GT, 1);
-	GEN8_IRQ_RESET_NDX(GT, 2);
-	GEN8_IRQ_RESET_NDX(GT, 3);
+	gen8_gt_irq_reset(dev_priv);
 
 	GEN5_IRQ_RESET(GEN8_PCU_);
 
@@ -4387,7 +4366,7 @@ void intel_irq_init(struct drm_device *dev)
 		dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
 	} else if (IS_GEN8(dev)) {
 		dev->driver->irq_handler = gen8_irq_handler;
-		dev->driver->irq_preinstall = gen8_irq_preinstall;
+		dev->driver->irq_preinstall = gen8_irq_reset;
 		dev->driver->irq_postinstall = gen8_irq_postinstall;
 		dev->driver->irq_uninstall = gen8_irq_uninstall;
 		dev->driver->enable_vblank = gen8_enable_vblank;
@@ -4395,7 +4374,7 @@ void intel_irq_init(struct drm_device *dev)
 		dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
 	} else if (HAS_PCH_SPLIT(dev)) {
 		dev->driver->irq_handler = ironlake_irq_handler;
-		dev->driver->irq_preinstall = ironlake_irq_preinstall;
+		dev->driver->irq_preinstall = ironlake_irq_reset;
 		dev->driver->irq_postinstall = ironlake_irq_postinstall;
 		dev->driver->irq_uninstall = ironlake_irq_uninstall;
 		dev->driver->enable_vblank = ironlake_enable_vblank;

drivers/gpu/drm/i915/i915_reg.h

@@ -1179,7 +1179,7 @@ enum punit_power_well {
 #define   I915_ERROR_INSTRUCTION			(1<<0)
 #define INSTPM	        0x020c0
 #define   INSTPM_SELF_EN (1<<12) /* 915GM only */
-#define   INSTPM_AGPBUSY_DIS (1<<11) /* gen3: when disabled, pending interrupts
+#define   INSTPM_AGPBUSY_INT_EN (1<<11) /* gen3: when disabled, pending interrupts
 					will not assert AGPBUSY# and will only
 					be delivered when out of C3. */
 #define   INSTPM_FORCE_ORDERING				(1<<7) /* GEN6+ */
@@ -1260,6 +1260,10 @@ enum punit_power_well {
 #define   MI_ARB_DISPLAY_PRIORITY_A_B		(0 << 0)	/* display A > display B */
 #define   MI_ARB_DISPLAY_PRIORITY_B_A		(1 << 0)	/* display B > display A */
 
+#define MI_STATE	0x020e4 /* gen2 only */
+#define   MI_AGPBUSY_INT_EN			(1 << 1) /* 85x only */
+#define   MI_AGPBUSY_830_MODE			(1 << 0) /* 85x only */
+
 #define CACHE_MODE_0	0x02120 /* 915+ only */
 #define   CM0_PIPELINED_RENDER_FLUSH_DISABLE (1<<8)
 #define   CM0_IZ_OPT_DISABLE      (1<<6)

drivers/gpu/drm/i915/intel_bios.c

@@ -744,6 +744,10 @@ parse_mipi(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
 	int i, panel_id, seq_size;
 	u16 block_size;
 
+	/* parse MIPI blocks only if LFP type is MIPI */
+	if (!dev_priv->vbt.has_mipi)
+		return;
+
 	/* Initialize this to undefined indicating no generic MIPI support */
 	dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID;
 
@@ -1059,6 +1063,15 @@ parse_device_mapping(struct drm_i915_private *dev_priv,
 			/* skip the device block if device type is invalid */
 			continue;
 		}
+
+		if (p_child->common.dvo_port >= DVO_PORT_MIPIA
+		    && p_child->common.dvo_port <= DVO_PORT_MIPID
+		    &&p_child->common.device_type & DEVICE_TYPE_MIPI_OUTPUT) {
+			DRM_DEBUG_KMS("Found MIPI as LFP\n");
+			dev_priv->vbt.has_mipi = 1;
+			dev_priv->vbt.dsi.port = p_child->common.dvo_port;
+		}
+
 		child_dev_ptr = dev_priv->vbt.child_dev + count;
 		count++;
 		memcpy((void *)child_dev_ptr, (void *)p_child,

drivers/gpu/drm/i915/intel_bios.h

@@ -743,6 +743,10 @@ int intel_parse_bios(struct drm_device *dev);
 #define DVO_PORT_DPC	8
 #define DVO_PORT_DPD	9
 #define DVO_PORT_DPA	10
+#define DVO_PORT_MIPIA	21
+#define DVO_PORT_MIPIB	22
+#define DVO_PORT_MIPIC	23
+#define DVO_PORT_MIPID	24
 
 /* Block 52 contains MIPI Panel info
  * 6 such enteries will there. Index into correct

drivers/gpu/drm/i915/intel_display.c

@@ -1484,14 +1484,6 @@ static void intel_reset_dpio(struct drm_device *dev)
 	if (!IS_VALLEYVIEW(dev))
 		return;
 
-	/*
-	 * Enable the CRI clock source so we can get at the display and the
-	 * reference clock for VGA hotplug / manual detection.
-	 */
-	I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
-		   DPLL_REFA_CLK_ENABLE_VLV |
-		   DPLL_INTEGRATED_CRI_CLK_VLV);
-
 	if (IS_CHERRYVIEW(dev)) {
 		enum dpio_phy phy;
 		u32 val;
@@ -1516,17 +1508,23 @@ static void intel_reset_dpio(struct drm_device *dev)
 
 	} else {
 		/*
-		 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
-		 *  6.	De-assert cmn_reset/side_reset. Same as VLV X0.
-		 *   a.	GUnit 0x2110 bit[0] set to 1 (def 0)
-		 *   b.	The other bits such as sfr settings / modesel may all
-		 *	be set to 0.
-		 *
-		 * This should only be done on init and resume from S3 with
-		 * both PLLs disabled, or we risk losing DPIO and PLL
-		 * synchronization.
+		 * If DPIO has already been reset, e.g. by BIOS, just skip all
+		 * this.
 		 */
-		I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+		if (I915_READ(DPIO_CTL) & DPIO_CMNRST)
+			return;
+
+		/*
+		 * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx:
+		 * Need to assert and de-assert PHY SB reset by gating the
+		 * common lane power, then un-gating it.
+		 * Simply ungating isn't enough to reset the PHY enough to get
+		 * ports and lanes running.
+		 */
+		__vlv_set_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC,
+				     false);
+		__vlv_set_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC,
+				     true);
 	}
 }
 
@@ -7868,29 +7866,33 @@ static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	bool visible = base != 0;
-	u32 cntl;
+	uint32_t cntl;
 
-	if (intel_crtc->cursor_visible == visible)
-		return;
-
-	cntl = I915_READ(_CURACNTR);
-	if (visible) {
+	if (base != intel_crtc->cursor_base) {
 		/* On these chipsets we can only modify the base whilst
 		 * the cursor is disabled.
 		 */
+		if (intel_crtc->cursor_cntl) {
+			I915_WRITE(_CURACNTR, 0);
+			POSTING_READ(_CURACNTR);
+			intel_crtc->cursor_cntl = 0;
+		}
+
 		I915_WRITE(_CURABASE, base);
+		POSTING_READ(_CURABASE);
+	}
 
-		cntl &= ~(CURSOR_FORMAT_MASK);
-		/* XXX width must be 64, stride 256 => 0x00 << 28 */
-		cntl |= CURSOR_ENABLE |
+	/* XXX width must be 64, stride 256 => 0x00 << 28 */
+	cntl = 0;
+	if (base)
+		cntl = (CURSOR_ENABLE |
 			CURSOR_GAMMA_ENABLE |
-			CURSOR_FORMAT_ARGB;
-	} else
-		cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
-	I915_WRITE(_CURACNTR, cntl);
-
-	intel_crtc->cursor_visible = visible;
+			CURSOR_FORMAT_ARGB);
+	if (intel_crtc->cursor_cntl != cntl) {
+		I915_WRITE(_CURACNTR, cntl);
+		POSTING_READ(_CURACNTR);
+		intel_crtc->cursor_cntl = cntl;
+	}
 }
 
 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
@@ -7899,16 +7901,12 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int pipe = intel_crtc->pipe;
-	bool visible = base != 0;
-
-	if (intel_crtc->cursor_visible != visible) {
-		int16_t width = intel_crtc->cursor_width;
-		uint32_t cntl = I915_READ(CURCNTR(pipe));
-		if (base) {
-			cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
-			cntl |= MCURSOR_GAMMA_ENABLE;
+	uint32_t cntl;
 
-			switch (width) {
+	cntl = 0;
+	if (base) {
+		cntl = MCURSOR_GAMMA_ENABLE;
+		switch (intel_crtc->cursor_width) {
 			case 64:
 				cntl |= CURSOR_MODE_64_ARGB_AX;
 				break;
@@ -7921,18 +7919,16 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
 			default:
 				WARN_ON(1);
 				return;
-			}
-			cntl |= pipe << 28; /* Connect to correct pipe */
-		} else {
-			cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
-			cntl |= CURSOR_MODE_DISABLE;
 		}
+		cntl |= pipe << 28; /* Connect to correct pipe */
+	}
+	if (intel_crtc->cursor_cntl != cntl) {
 		I915_WRITE(CURCNTR(pipe), cntl);
-
-		intel_crtc->cursor_visible = visible;
+		POSTING_READ(CURCNTR(pipe));
+		intel_crtc->cursor_cntl = cntl;
 	}
+
 	/* and commit changes on next vblank */
-	POSTING_READ(CURCNTR(pipe));
 	I915_WRITE(CURBASE(pipe), base);
 	POSTING_READ(CURBASE(pipe));
 }
@@ -7943,15 +7939,12 @@ static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int pipe = intel_crtc->pipe;
-	bool visible = base != 0;
-
-	if (intel_crtc->cursor_visible != visible) {
-		int16_t width = intel_crtc->cursor_width;
-		uint32_t cntl = I915_READ(CURCNTR(pipe));
-		if (base) {
-			cntl &= ~CURSOR_MODE;
-			cntl |= MCURSOR_GAMMA_ENABLE;
-			switch (width) {
+	uint32_t cntl;
+
+	cntl = 0;
+	if (base) {
+		cntl = MCURSOR_GAMMA_ENABLE;
+		switch (intel_crtc->cursor_width) {
 			case 64:
 				cntl |= CURSOR_MODE_64_ARGB_AX;
 				break;
@@ -7964,21 +7957,18 @@ static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
 			default:
 				WARN_ON(1);
 				return;
-			}
-		} else {
-			cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
-			cntl |= CURSOR_MODE_DISABLE;
 		}
-		if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
-			cntl |= CURSOR_PIPE_CSC_ENABLE;
-			cntl &= ~CURSOR_TRICKLE_FEED_DISABLE;
-		}
-		I915_WRITE(CURCNTR(pipe), cntl);
+	}
+	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
+		cntl |= CURSOR_PIPE_CSC_ENABLE;
 
-		intel_crtc->cursor_visible = visible;
+	if (intel_crtc->cursor_cntl != cntl) {
+		I915_WRITE(CURCNTR(pipe), cntl);
+		POSTING_READ(CURCNTR(pipe));
+		intel_crtc->cursor_cntl = cntl;
 	}
+
 	/* and commit changes on next vblank */
-	POSTING_READ(CURCNTR(pipe));
 	I915_WRITE(CURBASE(pipe), base);
 	POSTING_READ(CURBASE(pipe));
 }
@@ -7994,7 +7984,6 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
 	int x = intel_crtc->cursor_x;
 	int y = intel_crtc->cursor_y;
 	u32 base = 0, pos = 0;
-	bool visible;
 
 	if (on)
 		base = intel_crtc->cursor_addr;
@@ -8023,8 +8012,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
 	}
 	pos |= y << CURSOR_Y_SHIFT;
 
-	visible = base != 0;
-	if (!visible && !intel_crtc->cursor_visible)
+	if (base == 0 && intel_crtc->cursor_base == 0)
 		return;
 
 	I915_WRITE(CURPOS(pipe), pos);
@@ -8035,6 +8023,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
 		i845_update_cursor(crtc, base);
 	else
 		i9xx_update_cursor(crtc, base);
+	intel_crtc->cursor_base = base;
 }
 
 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
@@ -10990,6 +10979,9 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 		intel_crtc->plane = !pipe;
 	}
 
+	intel_crtc->cursor_base = ~0;
+	intel_crtc->cursor_cntl = ~0;
+
 	init_waitqueue_head(&intel_crtc->vbl_wait);
 
 	BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
@@ -11103,7 +11095,7 @@ static void intel_setup_outputs(struct drm_device *dev)
 
 	intel_lvds_init(dev);
 
-	if (!IS_ULT(dev) && !IS_CHERRYVIEW(dev))
+	if (!IS_ULT(dev) && !IS_CHERRYVIEW(dev) && dev_priv->vbt.int_crt_support)
 		intel_crt_init(dev);
 
 	if (HAS_DDI(dev)) {
@@ -11618,9 +11610,6 @@ static struct intel_quirk intel_quirks[] = {
 	/* ThinkPad T60 needs pipe A force quirk (bug #16494) */
 	{ 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
 
-	/* 830 needs to leave pipe A & dpll A up */
-	{ 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
-
 	/* Lenovo U160 cannot use SSC on LVDS */
 	{ 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
 

drivers/gpu/drm/i915/intel_drv.h

@@ -386,7 +386,8 @@ struct intel_crtc {
 	uint32_t cursor_addr;
 	int16_t cursor_x, cursor_y;
 	int16_t cursor_width, cursor_height;
-	bool cursor_visible;
+	uint32_t cursor_cntl;
+	uint32_t cursor_base;
 
 	struct intel_plane_config plane_config;
 	struct intel_crtc_config config;
@@ -973,7 +974,8 @@ void intel_runtime_pm_put(struct drm_i915_private *dev_priv);
 void intel_init_runtime_pm(struct drm_i915_private *dev_priv);
 void intel_fini_runtime_pm(struct drm_i915_private *dev_priv);
 void ilk_wm_get_hw_state(struct drm_device *dev);
-
+void __vlv_set_power_well(struct drm_i915_private *dev_priv,
+			  enum punit_power_well power_well_id, bool enable);
 
 /* intel_sdvo.c */
 bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);

drivers/gpu/drm/i915/intel_dsi.c

@@ -35,6 +35,11 @@
 
 /* the sub-encoders aka panel drivers */
 static const struct intel_dsi_device intel_dsi_devices[] = {
+	{
+		.panel_id = MIPI_DSI_GENERIC_PANEL_ID,
+		.name = "vbt-generic-dsi-vid-mode-display",
+		.dev_ops = &vbt_generic_dsi_display_ops,
+	},
 };
 
 static void band_gap_reset(struct drm_i915_private *dev_priv)
@@ -201,6 +206,19 @@ static void intel_dsi_enable_nop(struct intel_encoder *encoder)
 	 */
 }
 
+static void intel_dsi_pre_disable(struct intel_encoder *encoder)
+{
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+
+	DRM_DEBUG_KMS("\n");
+
+	if (is_vid_mode(intel_dsi)) {
+		/* Send Shutdown command to the panel in LP mode */
+		dpi_send_cmd(intel_dsi, SHUTDOWN, DPI_LP_MODE_EN);
+		msleep(10);
+	}
+}
+
 static void intel_dsi_disable(struct intel_encoder *encoder)
 {
 	struct drm_device *dev = encoder->base.dev;
@@ -213,10 +231,6 @@ static void intel_dsi_disable(struct intel_encoder *encoder)
 	DRM_DEBUG_KMS("\n");
 
 	if (is_vid_mode(intel_dsi)) {
-		/* Send Shutdown command to the panel in LP mode */
-		dpi_send_cmd(intel_dsi, SHUTDOWN, DPI_LP_MODE_EN);
-		msleep(10);
-
 		/* de-assert ip_tg_enable signal */
 		temp = I915_READ(MIPI_PORT_CTRL(pipe));
 		I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE);
@@ -288,6 +302,8 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder)
 
 	DRM_DEBUG_KMS("\n");
 
+	intel_dsi_disable(encoder);
+
 	intel_dsi_clear_device_ready(encoder);
 
 	val = I915_READ(DSPCLK_GATE_D);
@@ -655,6 +671,10 @@ bool intel_dsi_init(struct drm_device *dev)
 
 	DRM_DEBUG_KMS("\n");
 
+	/* There is no detection method for MIPI so rely on VBT */
+	if (!dev_priv->vbt.has_mipi)
+		return false;
+
 	intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL);
 	if (!intel_dsi)
 		return false;
@@ -686,7 +706,7 @@ bool intel_dsi_init(struct drm_device *dev)
 	intel_encoder->pre_pll_enable = intel_dsi_pre_pll_enable;
 	intel_encoder->pre_enable = intel_dsi_pre_enable;
 	intel_encoder->enable = intel_dsi_enable_nop;
-	intel_encoder->disable = intel_dsi_disable;
+	intel_encoder->disable = intel_dsi_pre_disable;
 	intel_encoder->post_disable = intel_dsi_post_disable;
 	intel_encoder->get_hw_state = intel_dsi_get_hw_state;
 	intel_encoder->get_config = intel_dsi_get_config;

drivers/gpu/drm/i915/intel_dsi.h

@@ -133,4 +133,6 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder)
 extern void vlv_enable_dsi_pll(struct intel_encoder *encoder);
 extern void vlv_disable_dsi_pll(struct intel_encoder *encoder);
 
+extern struct intel_dsi_dev_ops vbt_generic_dsi_display_ops;
+
 #endif /* _INTEL_DSI_H */

drivers/gpu/drm/i915/intel_pm.c

@@ -5388,8 +5388,11 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(GEN6_UCGCTL2,
 		   GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
 
-	/* WaDisableL3Bank2xClockGate:vlv */
-	I915_WRITE(GEN7_UCGCTL4, GEN7_L3BANK2X_CLOCK_GATE_DISABLE);
+	/* WaDisableL3Bank2xClockGate:vlv
+	 * Disabling L3 clock gating- MMIO 940c[25] = 1
+	 * Set bit 25, to disable L3_BANK_2x_CLK_GATING */
+	I915_WRITE(GEN7_UCGCTL4,
+		   I915_READ(GEN7_UCGCTL4) | GEN7_L3BANK2X_CLOCK_GATE_DISABLE);
 
 	I915_WRITE(MI_ARB_VLV, MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
 
@@ -5541,6 +5544,12 @@ static void gen3_init_clock_gating(struct drm_device *dev)
 
 	/* IIR "flip pending" means done if this bit is set */
 	I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE));
+
+	/* interrupts should cause a wake up from C3 */
+	I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_INT_EN));
+
+	/* On GEN3 we really need to make sure the ARB C3 LP bit is set */
+	I915_WRITE(MI_ARB_STATE, _MASKED_BIT_ENABLE(MI_ARB_C3_LP_WRITE_ENABLE));
 }
 
 static void i85x_init_clock_gating(struct drm_device *dev)
@@ -5548,6 +5557,10 @@ static void i85x_init_clock_gating(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
+
+	/* interrupts should cause a wake up from C3 */
+	I915_WRITE(MI_STATE, _MASKED_BIT_ENABLE(MI_AGPBUSY_INT_EN) |
+		   _MASKED_BIT_DISABLE(MI_AGPBUSY_830_MODE));
 }
 
 static void i830_init_clock_gating(struct drm_device *dev)
@@ -5599,10 +5612,25 @@ bool intel_display_power_enabled_sw(struct drm_i915_private *dev_priv,
 				    enum intel_display_power_domain domain)
 {
 	struct i915_power_domains *power_domains;
+	struct i915_power_well *power_well;
+	bool is_enabled;
+	int i;
+
+	if (dev_priv->pm.suspended)
+		return false;
 
 	power_domains = &dev_priv->power_domains;
+	is_enabled = true;
+	for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
+		if (power_well->always_on)
+			continue;
 
-	return power_domains->domain_use_count[domain];
+		if (!power_well->count) {
+			is_enabled = false;
+			break;
+		}
+	}
+	return is_enabled;
 }
 
 bool intel_display_power_enabled(struct drm_i915_private *dev_priv,
@@ -5745,13 +5773,34 @@ static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
 	return true;
 }
 
-static void vlv_set_power_well(struct drm_i915_private *dev_priv,
-			       struct i915_power_well *power_well, bool enable)
+void __vlv_set_power_well(struct drm_i915_private *dev_priv,
+			  enum punit_power_well power_well_id, bool enable)
 {
-	enum punit_power_well power_well_id = power_well->data;
+	struct drm_device *dev = dev_priv->dev;
 	u32 mask;
 	u32 state;
 	u32 ctrl;
+	enum pipe pipe;
+
+	if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+		if (enable) {
+			/*
+			 * Enable the CRI clock source so we can get at the
+			 * display and the reference clock for VGA
+			 * hotplug / manual detection.
+			 */
+			I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+				   DPLL_REFA_CLK_ENABLE_VLV |
+				   DPLL_INTEGRATED_CRI_CLK_VLV);
+			udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+		} else {
+			for_each_pipe(pipe)
+				assert_pll_disabled(dev_priv, pipe);
+			/* Assert common reset */
+			I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) &
+				   ~DPIO_CMNRST);
+		}
+	}
 
 	mask = PUNIT_PWRGT_MASK(power_well_id);
 	state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
@@ -5779,6 +5828,28 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv,
 
 out:
 	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	/*
+	 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
+	 *  6.	De-assert cmn_reset/side_reset. Same as VLV X0.
+	 *   a.	GUnit 0x2110 bit[0] set to 1 (def 0)
+	 *   b.	The other bits such as sfr settings / modesel may all
+	 *	be set to 0.
+	 *
+	 * This should only be done on init and resume from S3 with
+	 * both PLLs disabled, or we risk losing DPIO and PLL
+	 * synchronization.
+	 */
+	if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC && enable)
+		I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+}
+
+static void vlv_set_power_well(struct drm_i915_private *dev_priv,
+			       struct i915_power_well *power_well, bool enable)
+{
+	enum punit_power_well power_well_id = power_well->data;
+
+	__vlv_set_power_well(dev_priv, power_well_id, enable);
 }
 
 static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv,
@@ -6113,12 +6184,6 @@ static struct i915_power_well vlv_power_wells[] = {
 		.data = PUNIT_POWER_WELL_DISP2D,
 		.ops = &vlv_display_power_well_ops,
 	},
-	{
-		.name = "dpio-common",
-		.domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
-		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
-		.ops = &vlv_dpio_power_well_ops,
-	},
 	{
 		.name = "dpio-tx-b-01",
 		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
@@ -6155,6 +6220,12 @@ static struct i915_power_well vlv_power_wells[] = {
 		.ops = &vlv_dpio_power_well_ops,
 		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
 	},
+	{
+		.name = "dpio-common",
+		.domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
+		.ops = &vlv_dpio_power_well_ops,
+	},
 };
 
 #define set_power_wells(power_domains, __power_wells) ({		\

drivers/gpu/drm/i915/intel_ringbuffer.c

@@ -1494,7 +1494,7 @@ void intel_cleanup_ring_buffer(struct intel_engine_cs *ring)
 		return;
 
 	intel_stop_ring_buffer(ring);
-	WARN_ON((I915_READ_MODE(ring) & MODE_IDLE) == 0);
+	WARN_ON(!IS_GEN2(ring->dev) && (I915_READ_MODE(ring) & MODE_IDLE) == 0);
 
 	iounmap(ringbuf->virtual_start);
 

drivers/gpu/drm/i915/intel_uncore.c

@@ -393,26 +393,8 @@ void intel_uncore_early_sanitize(struct drm_device *dev)
 
 void intel_uncore_sanitize(struct drm_device *dev)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 reg_val;
-
 	/* BIOS often leaves RC6 enabled, but disable it for hw init */
 	intel_disable_gt_powersave(dev);
-
-	/* Turn off power gate, require especially for the BIOS less system */
-	if (IS_VALLEYVIEW(dev)) {
-
-		mutex_lock(&dev_priv->rps.hw_lock);
-		reg_val = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS);
-
-		if (reg_val & (PUNIT_PWRGT_PWR_GATE(PUNIT_POWER_WELL_RENDER) |
-			       PUNIT_PWRGT_PWR_GATE(PUNIT_POWER_WELL_MEDIA) |
-			       PUNIT_PWRGT_PWR_GATE(PUNIT_POWER_WELL_DISP2D)))
-			vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, 0x0);
-
-		mutex_unlock(&dev_priv->rps.hw_lock);
-
-	}
 }
 
 /*
@@ -967,6 +949,9 @@ static int i965_do_reset(struct drm_device *dev)
 {
 	int ret;
 
+	/* FIXME: i965g/gm need a display save/restore for gpu reset. */
+	return -ENODEV;
+
 	/*
 	 * Set the domains we want to reset (GRDOM/bits 2 and 3) as
 	 * well as the reset bit (GR/bit 0).  Setting the GR bit

include/drm/drm_plane_helper.h

@@ -24,6 +24,17 @@
 #ifndef DRM_PLANE_HELPER_H
 #define DRM_PLANE_HELPER_H
 
+#include <drm/drm_rect.h>
+
+/*
+ * Drivers that don't allow primary plane scaling may pass this macro in place
+ * of the min/max scale parameters of the update checker function.
+ *
+ * Due to src being in 16.16 fixed point and dest being in integer pixels,
+ * 1<<16 represents no scaling.
+ */
+#define DRM_PLANE_HELPER_NO_SCALING (1<<16)
+
 /**
  * DOC: plane helpers
  *
@@ -31,6 +42,17 @@
  * planes.
  */
 
+extern int drm_plane_helper_check_update(struct drm_plane *plane,
+					 struct drm_crtc *crtc,
+					 struct drm_framebuffer *fb,
+					 struct drm_rect *src,
+					 struct drm_rect *dest,
+					 const struct drm_rect *clip,
+					 int min_scale,
+					 int max_scale,
+					 bool can_position,
+					 bool can_update_disabled,
+					 bool *visible);
 extern int drm_primary_helper_update(struct drm_plane *plane,
 				     struct drm_crtc *crtc,
 				     struct drm_framebuffer *fb,