zd1201: move under zydas vendor directory

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

MAINTAINERS

@@ -11252,7 +11252,7 @@ USB ZD1201 DRIVER
 L:	linux-wireless@vger.kernel.org
 W:	http://linux-lc100020.sourceforge.net
 S:	Orphan
-F:	drivers/net/wireless/zd1201.*
+F:	drivers/net/wireless/zydas/zd1201.*
 
 USB ZR364XX DRIVER
 M:	Antoine Jacquet <royale@zerezo.com>

drivers/net/wireless/Kconfig

@@ -24,6 +24,7 @@ source "drivers/net/wireless/cisco/Kconfig"
 source "drivers/net/wireless/intel/Kconfig"
 source "drivers/net/wireless/marvell/Kconfig"
 source "drivers/net/wireless/st/Kconfig"
+source "drivers/net/wireless/zydas/Kconfig"
 
 config PCMCIA_RAYCS
 	tristate "Aviator/Raytheon 2.4GHz wireless support"
@@ -70,25 +71,6 @@ config PRISM54
 
 	  When built as module you get the module prism54
 
-config USB_ZD1201
-	tristate "USB ZD1201 based Wireless device support"
-	depends on CFG80211 && USB
-	select WIRELESS_EXT
-	select WEXT_PRIV
-	select FW_LOADER
-	---help---
-	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
-	  ZD1201 chip.
-
-	  This driver makes the adapter appear as a normal Ethernet interface,
-	  typically on wlan0.
-
-	  The zd1201 device requires external firmware to be loaded.
-	  This can be found at http://linux-lc100020.sourceforge.net/
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called zd1201.
-
 config USB_NET_RNDIS_WLAN
 	tristate "Wireless RNDIS USB support"
 	depends on USB

drivers/net/wireless/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
 obj-$(CONFIG_WLAN_VENDOR_INTEL) += intel/
 obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/
 obj-$(CONFIG_WLAN_VENDOR_ST) += st/
+obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/
 
 obj-$(CONFIG_HERMES)		+= orinoco/
 
@@ -24,8 +25,6 @@ obj-$(CONFIG_PCMCIA_WL3501)	+= wl3501_cs.o
 
 obj-$(CONFIG_USB_NET_RNDIS_WLAN)	+= rndis_wlan.o
 
-obj-$(CONFIG_USB_ZD1201)	+= zd1201.o
-
 obj-$(CONFIG_RT2X00)	+= rt2x00/
 
 obj-$(CONFIG_WL_MEDIATEK)	+= mediatek/

drivers/net/wireless/zydas/Kconfig

+config WLAN_VENDOR_ZYDAS
+	bool "ZyDAS devices"
+	default y
+	---help---
+	  If you have a wireless card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about  cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if WLAN_VENDOR_ZYDAS
+
+config USB_ZD1201
+	tristate "USB ZD1201 based Wireless device support"
+	depends on CFG80211 && USB
+	select WIRELESS_EXT
+	select WEXT_PRIV
+	select FW_LOADER
+	---help---
+	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
+	  ZD1201 chip.
+
+	  This driver makes the adapter appear as a normal Ethernet interface,
+	  typically on wlan0.
+
+	  The zd1201 device requires external firmware to be loaded.
+	  This can be found at http://linux-lc100020.sourceforge.net/
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zd1201.
+
+endif # WLAN_VENDOR_ZYDAS

drivers/net/wireless/zydas/Makefile

+obj-$(CONFIG_USB_ZD1201)	+= zd1201.o