Commit ed3593f9 authored by Gabriel FERNANDEZ's avatar Gabriel FERNANDEZ Committed by Maxime Coquelin

ARM: STi: DT: STiH41x: Rename CLK_SYSIN into clk_sysin

all-caps node name is not very usual.
Signed-off-by: default avatarGabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: default avatarMaxime Coquelin <maxime.coquelin@st.com>
parent e92cc881
...@@ -10,7 +10,7 @@ clocks { ...@@ -10,7 +10,7 @@ clocks {
/* /*
* Fixed 30MHz oscillator input to SoC * Fixed 30MHz oscillator input to SoC
*/ */
CLK_SYSIN: CLK_SYSIN { clk_sysin: clk-sysin {
#clock-cells = <0>; #clock-cells = <0>;
compatible = "fixed-clock"; compatible = "fixed-clock";
clock-frequency = <30000000>; clock-frequency = <30000000>;
......
...@@ -91,7 +91,7 @@ sbc_serial1: serial@fe531000 { ...@@ -91,7 +91,7 @@ sbc_serial1: serial@fe531000 {
status = "disabled"; status = "disabled";
reg = <0xfe531000 0x2c>; reg = <0xfe531000 0x2c>;
interrupts = <0 210 0>; interrupts = <0 210 0>;
clocks = <&CLK_SYSIN>; clocks = <&clk_sysin>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>; pinctrl-0 = <&pinctrl_sbc_serial1>;
}; };
...@@ -126,7 +126,7 @@ i2c@fe540000 { ...@@ -126,7 +126,7 @@ i2c@fe540000 {
compatible = "st,comms-ssc4-i2c"; compatible = "st,comms-ssc4-i2c";
reg = <0xfe540000 0x110>; reg = <0xfe540000 0x110>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CLK_SYSIN>; clocks = <&clk_sysin>;
clock-names = "ssc"; clock-names = "ssc";
clock-frequency = <400000>; clock-frequency = <400000>;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -139,7 +139,7 @@ i2c@fe541000 { ...@@ -139,7 +139,7 @@ i2c@fe541000 {
compatible = "st,comms-ssc4-i2c"; compatible = "st,comms-ssc4-i2c";
reg = <0xfe541000 0x110>; reg = <0xfe541000 0x110>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CLK_SYSIN>; clocks = <&clk_sysin>;
clock-names = "ssc"; clock-names = "ssc";
clock-frequency = <400000>; clock-frequency = <400000>;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -200,7 +200,7 @@ rc: rc@fe518000 { ...@@ -200,7 +200,7 @@ rc: rc@fe518000 {
compatible = "st,comms-irb"; compatible = "st,comms-irb";
reg = <0xfe518000 0x234>; reg = <0xfe518000 0x234>;
interrupts = <0 203 0>; interrupts = <0 203 0>;
clocks = <&CLK_SYSIN>; clocks = <&clk_sysin>;
rx-mode = "infrared"; rx-mode = "infrared";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ir>; pinctrl-0 = <&pinctrl_ir>;
...@@ -212,7 +212,7 @@ keyscan: keyscan@fe4b0000 { ...@@ -212,7 +212,7 @@ keyscan: keyscan@fe4b0000 {
status = "disabled"; status = "disabled";
reg = <0xfe4b0000 0x2000>; reg = <0xfe4b0000 0x2000>;
interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
clocks = <&CLK_SYSIN>; clocks = <&clk_sysin>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_keyscan>; pinctrl-0 = <&pinctrl_keyscan>;
resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>, resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>,
......
...@@ -6,16 +6,17 @@ ...@@ -6,16 +6,17 @@
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
/ { / {
clocks { clocks {
/* /*
* Fixed 30MHz oscillator inputs to SoC * Fixed 30MHz oscillator inputs to SoC
*/ */
CLK_SYSIN: CLK_SYSIN { clk_sysin: clk-sysin {
#clock-cells = <0>; #clock-cells = <0>;
compatible = "fixed-clock"; compatible = "fixed-clock";
clock-frequency = <30000000>; clock-frequency = <30000000>;
clock-output-names = "CLK_SYSIN";
}; };
/* /*
......
...@@ -102,7 +102,7 @@ sbc_serial1: serial@fe531000 { ...@@ -102,7 +102,7 @@ sbc_serial1: serial@fe531000 {
interrupts = <0 210 0>; interrupts = <0 210 0>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>; pinctrl-0 = <&pinctrl_sbc_serial1>;
clocks = <&CLK_SYSIN>; clocks = <&clk_sysin>;
}; };
i2c@fed40000 { i2c@fed40000 {
...@@ -135,7 +135,7 @@ i2c@fe540000 { ...@@ -135,7 +135,7 @@ i2c@fe540000 {
compatible = "st,comms-ssc4-i2c"; compatible = "st,comms-ssc4-i2c";
reg = <0xfe540000 0x110>; reg = <0xfe540000 0x110>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CLK_SYSIN>; clocks = <&clk_sysin>;
clock-names = "ssc"; clock-names = "ssc";
clock-frequency = <400000>; clock-frequency = <400000>;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -148,7 +148,7 @@ i2c@fe541000 { ...@@ -148,7 +148,7 @@ i2c@fe541000 {
compatible = "st,comms-ssc4-i2c"; compatible = "st,comms-ssc4-i2c";
reg = <0xfe541000 0x110>; reg = <0xfe541000 0x110>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CLK_SYSIN>; clocks = <&clk_sysin>;
clock-names = "ssc"; clock-names = "ssc";
clock-frequency = <400000>; clock-frequency = <400000>;
pinctrl-names = "default"; pinctrl-names = "default";
...@@ -206,7 +206,7 @@ rc: rc@fe518000 { ...@@ -206,7 +206,7 @@ rc: rc@fe518000 {
reg = <0xfe518000 0x234>; reg = <0xfe518000 0x234>;
interrupts = <0 203 0>; interrupts = <0 203 0>;
rx-mode = "infrared"; rx-mode = "infrared";
clocks = <&CLK_SYSIN>; clocks = <&clk_sysin>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ir>; pinctrl-0 = <&pinctrl_ir>;
resets = <&softreset STIH416_IRB_SOFTRESET>; resets = <&softreset STIH416_IRB_SOFTRESET>;
...@@ -230,7 +230,7 @@ keyscan: keyscan@fe4b0000 { ...@@ -230,7 +230,7 @@ keyscan: keyscan@fe4b0000 {
status = "disabled"; status = "disabled";
reg = <0xfe4b0000 0x2000>; reg = <0xfe4b0000 0x2000>;
interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
clocks = <&CLK_SYSIN>; clocks = <&clk_sysin>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_keyscan>; pinctrl-0 = <&pinctrl_keyscan>;
resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment