Commit ed36911c authored by Marc Carino's avatar Marc Carino Committed by Tejun Heo

libata: Add support for SEND/RECEIVE FPDMA QUEUED

Add support for the following ATA opcodes, which are present
in SATA 3.1 and T13 ATA ACS-3:

        SEND FPDMA QUEUED
        RECEIVE FPDMA QUEUED
Signed-off-by: default avatarMarc Carino <marc.ceeeee@gmail.com>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
parent 40fb59e7
......@@ -2141,6 +2141,22 @@ static int ata_dev_config_ncq(struct ata_device *dev,
else
snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
ddepth, aa_desc);
if ((ap->flags & ATA_FLAG_FPDMA_AUX) &&
ata_id_has_ncq_send_and_recv(dev->id)) {
err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_SEND_RECV,
0, ap->sector_buf, 1);
if (err_mask) {
ata_dev_dbg(dev,
"failed to get NCQ Send/Recv Log Emask 0x%x\n",
err_mask);
} else {
dev->flags |= ATA_DFLAG_NCQ_SEND_RECV;
memcpy(dev->ncq_send_recv_cmds, ap->sector_buf,
ATA_LOG_NCQ_SEND_RECV_SIZE);
}
}
return 0;
}
......
......@@ -239,6 +239,8 @@ enum {
ATA_CMD_WRITE_QUEUED_FUA_EXT = 0x3E,
ATA_CMD_FPDMA_READ = 0x60,
ATA_CMD_FPDMA_WRITE = 0x61,
ATA_CMD_FPDMA_SEND = 0x64,
ATA_CMD_FPDMA_RECV = 0x65,
ATA_CMD_PIO_READ = 0x20,
ATA_CMD_PIO_READ_EXT = 0x24,
ATA_CMD_PIO_WRITE = 0x30,
......@@ -293,8 +295,13 @@ enum {
/* marked obsolete in the ATA/ATAPI-7 spec */
ATA_CMD_RESTORE = 0x10,
/* Subcmds for ATA_CMD_FPDMA_SEND */
ATA_SUBCMD_FPDMA_SEND_DSM = 0x00,
ATA_SUBCMD_FPDMA_SEND_WR_LOG_DMA_EXT = 0x02,
/* READ_LOG_EXT pages */
ATA_LOG_SATA_NCQ = 0x10,
ATA_LOG_NCQ_SEND_RECV = 0x13,
ATA_LOG_SATA_ID_DEV_DATA = 0x30,
ATA_LOG_SATA_SETTINGS = 0x08,
ATA_LOG_DEVSLP_OFFSET = 0x30,
......@@ -305,6 +312,15 @@ enum {
ATA_LOG_DEVSLP_VALID = 0x07,
ATA_LOG_DEVSLP_VALID_MASK = 0x80,
/* NCQ send and receive log */
ATA_LOG_NCQ_SEND_RECV_SUBCMDS_OFFSET = 0x00,
ATA_LOG_NCQ_SEND_RECV_SUBCMDS_DSM = (1 << 0),
ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET = 0x04,
ATA_LOG_NCQ_SEND_RECV_DSM_TRIM = (1 << 0),
ATA_LOG_NCQ_SEND_RECV_RD_LOG_OFFSET = 0x08,
ATA_LOG_NCQ_SEND_RECV_WR_LOG_OFFSET = 0x0C,
ATA_LOG_NCQ_SEND_RECV_SIZE = 0x10,
/* READ/WRITE LONG (obsolete) */
ATA_CMD_READ_LONG = 0x22,
ATA_CMD_READ_LONG_ONCE = 0x23,
......@@ -772,6 +788,11 @@ static inline int ata_id_rotation_rate(const u16 *id)
return val;
}
static inline bool ata_id_has_ncq_send_and_recv(const u16 *id)
{
return id[ATA_ID_SATA_CAPABILITY_2] & BIT(6);
}
static inline bool ata_id_has_trim(const u16 *id)
{
if (ata_id_major_version(id) >= 7 &&
......
......@@ -172,6 +172,7 @@ enum {
ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */
ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */
ATA_DFLAG_UNLOCK_HPA = (1 << 18), /* unlock HPA */
ATA_DFLAG_NCQ_SEND_RECV = (1 << 19), /* device supports NCQ SEND and RECV */
ATA_DFLAG_INIT_MASK = (1 << 24) - 1,
ATA_DFLAG_DETACH = (1 << 24),
......@@ -704,6 +705,9 @@ struct ata_device {
/* DEVSLP Timing Variables from Identify Device Data Log */
u8 devslp_timing[ATA_LOG_DEVSLP_SIZE];
/* NCQ send and receive log subcommand support */
u8 ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_SIZE];
/* error history */
int spdn_cnt;
/* ering is CLEAR_END, read comment above CLEAR_END */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment