staging: unisys: combine visorchannel.h and visorbus.h

Combine the include files visorchannel.h and visorbus.h so that only one
include file is needed for the .c files.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/unisys/include/iochannel.h

@@ -34,7 +34,7 @@
 #include <linux/uuid.h>
 #include <linux/skbuff.h>
 
-#include "visorchannel.h"
+#include "visorbus.h"
 
 /*
  * Must increment these whenever you insert or delete fields within this channel

drivers/staging/unisys/include/visorbus.h

@@ -19,8 +19,172 @@
 
 #include <linux/device.h>
 
-#include "visorchannel.h"
+#define VISOR_CHANNEL_SIGNATURE ('L' << 24 | 'N' << 16 | 'C' << 8 | 'E')
 
+/*
+ * enum channel_serverstate
+ * @CHANNELSRV_UNINITIALIZED: Channel is in an undefined state.
+ * @CHANNELSRV_READY:	      Channel has been initialized by server.
+ */
+enum channel_serverstate {
+	CHANNELSRV_UNINITIALIZED = 0,
+	CHANNELSRV_READY = 1
+};
+
+/*
+ * enum channel_clientstate
+ * @CHANNELCLI_DETACHED:
+ * @CHANNELCLI_DISABLED:  Client can see channel but is NOT allowed to use it
+ *			  unless given TBD* explicit request
+ *			  (should actually be < DETACHED).
+ * @CHANNELCLI_ATTACHING: Legacy EFI client request for EFI server to attach.
+ * @CHANNELCLI_ATTACHED:  Idle, but client may want to use channel any time.
+ * @CHANNELCLI_BUSY:	  Client either wants to use or is using channel.
+ * @CHANNELCLI_OWNED:	  "No worries" state - client can access channel
+ *			  anytime.
+ */
+enum channel_clientstate {
+	CHANNELCLI_DETACHED = 0,
+	CHANNELCLI_DISABLED = 1,
+	CHANNELCLI_ATTACHING = 2,
+	CHANNELCLI_ATTACHED = 3,
+	CHANNELCLI_BUSY = 4,
+	CHANNELCLI_OWNED = 5
+};
+
+/*
+ * Values for VISOR_CHANNEL_PROTOCOL.Features: This define exists so that
+ * a guest can look at the FeatureFlags in the io channel, and configure the
+ * driver to use interrupts or not based on this setting. All feature bits for
+ * all channels should be defined here. The io channel feature bits are defined
+ * below.
+ */
+#define VISOR_DRIVER_ENABLES_INTS (0x1ULL << 1)
+#define VISOR_CHANNEL_IS_POLLING (0x1ULL << 3)
+#define VISOR_IOVM_OK_DRIVER_DISABLING_INTS (0x1ULL << 4)
+#define VISOR_DRIVER_DISABLES_INTS (0x1ULL << 5)
+#define VISOR_DRIVER_ENHANCED_RCVBUF_CHECKING (0x1ULL << 6)
+
+/*
+ * struct channel_header - Common Channel Header
+ * @signature:	       Signature.
+ * @legacy_state:      DEPRECATED - being replaced by.
+ * @header_size:       sizeof(struct channel_header).
+ * @size:	       Total size of this channel in bytes.
+ * @features:	       Flags to modify behavior.
+ * @chtype:	       Channel type: data, bus, control, etc..
+ * @partition_handle:  ID of guest partition.
+ * @handle:	       Device number of this channel in client.
+ * @ch_space_offset:   Offset in bytes to channel specific area.
+ * @version_id:	       Struct channel_header Version ID.
+ * @partition_index:   Index of guest partition.
+ * @zone_uuid:	       Guid of Channel's zone.
+ * @cli_str_offset:    Offset from channel header to null-terminated
+ *		       ClientString (0 if ClientString not present).
+ * @cli_state_boot:    CHANNEL_CLIENTSTATE of pre-boot EFI client of this
+ *		       channel.
+ * @cmd_state_cli:     CHANNEL_COMMANDSTATE (overloaded in Windows drivers, see
+ *		       ServerStateUp, ServerStateDown, etc).
+ * @cli_state_os:      CHANNEL_CLIENTSTATE of Guest OS client of this channel.
+ * @ch_characteristic: CHANNEL_CHARACTERISTIC_<xxx>.
+ * @cmd_state_srv:     CHANNEL_COMMANDSTATE (overloaded in Windows drivers, see
+ *		       ServerStateUp, ServerStateDown, etc).
+ * @srv_state:	       CHANNEL_SERVERSTATE.
+ * @cli_error_boot:    Bits to indicate err states for boot clients, so err
+ *		       messages can be throttled.
+ * @cli_error_os:      Bits to indicate err states for OS clients, so err
+ *		       messages can be throttled.
+ * @filler:	       Pad out to 128 byte cacheline.
+ * @recover_channel:   Please add all new single-byte values below here.
+ */
+struct channel_header {
+	u64 signature;
+	u32 legacy_state;
+	/* SrvState, CliStateBoot, and CliStateOS below */
+	u32 header_size;
+	u64 size;
+	u64 features;
+	guid_t chtype;
+	u64 partition_handle;
+	u64 handle;
+	u64 ch_space_offset;
+	u32 version_id;
+	u32 partition_index;
+	guid_t zone_guid;
+	u32 cli_str_offset;
+	u32 cli_state_boot;
+	u32 cmd_state_cli;
+	u32 cli_state_os;
+	u32 ch_characteristic;
+	u32 cmd_state_srv;
+	u32 srv_state;
+	u8 cli_error_boot;
+	u8 cli_error_os;
+	u8 filler[1];
+	u8 recover_channel;
+} __packed;
+
+#define VISOR_CHANNEL_ENABLE_INTS (0x1ULL << 0)
+
+/*
+ * struct signal_queue_header - Subheader for the Signal Type variation of the
+ *                              Common Channel.
+ * @version:	      SIGNAL_QUEUE_HEADER Version ID.
+ * @chtype:	      Queue type: storage, network.
+ * @size:	      Total size of this queue in bytes.
+ * @sig_base_offset:  Offset to signal queue area.
+ * @features:	      Flags to modify behavior.
+ * @num_sent:	      Total # of signals placed in this queue.
+ * @num_overflows:    Total # of inserts failed due to full queue.
+ * @signal_size:      Total size of a signal for this queue.
+ * @max_slots:        Max # of slots in queue, 1 slot is always empty.
+ * @max_signals:      Max # of signals in queue (MaxSignalSlots-1).
+ * @head:	      Queue head signal #.
+ * @num_received:     Total # of signals removed from this queue.
+ * @tail:	      Queue tail signal.
+ * @reserved1:	      Reserved field.
+ * @reserved2:	      Reserved field.
+ * @client_queue:
+ * @num_irq_received: Total # of Interrupts received. This is incremented by the
+ *		      ISR in the guest windows driver.
+ * @num_empty:	      Number of times that visor_signal_remove is called and
+ *		      returned Empty Status.
+ * @errorflags:	      Error bits set during SignalReinit to denote trouble with
+ *		      client's fields.
+ * @filler:	      Pad out to 64 byte cacheline.
+ */
+struct signal_queue_header {
+	/* 1st cache line */
+	u32 version;
+	u32 chtype;
+	u64 size;
+	u64 sig_base_offset;
+	u64 features;
+	u64 num_sent;
+	u64 num_overflows;
+	u32 signal_size;
+	u32 max_slots;
+	u32 max_signals;
+	u32 head;
+	/* 2nd cache line */
+	u64 num_received;
+	u32 tail;
+	u32 reserved1;
+	u64 reserved2;
+	u64 client_queue;
+	u64 num_irq_received;
+	u64 num_empty;
+	u32 errorflags;
+	u8 filler[12];
+} __packed;
+
+/* VISORCHANNEL Guids */
+/* {414815ed-c58c-11da-95a9-00e08161165f} */
+#define VISOR_VHBA_CHANNEL_GUID \
+	GUID_INIT(0x414815ed, 0xc58c, 0x11da, \
+		  0x95, 0xa9, 0x0, 0xe0, 0x81, 0x61, 0x16, 0x5f)
+#define VISOR_VHBA_CHANNEL_GUID_STR \
+	"414815ed-c58c-11da-95a9-00e08161165f"
 struct visorchipset_state {
 	u32 created:1;
 	u32 attached:1;

drivers/staging/unisys/include/visorchannel.h

-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 - 2013 UNISYS CORPORATION
- * All rights reserved.
- */
-
-#ifndef __VISORCHANNEL_H__
-#define __VISORCHANNEL_H__
-
-#include <linux/types.h>
-#include <linux/uuid.h>
-
-#define VISOR_CHANNEL_SIGNATURE ('L' << 24 | 'N' << 16 | 'C' << 8 | 'E')
-
-/*
- * enum channel_serverstate
- * @CHANNELSRV_UNINITIALIZED: Channel is in an undefined state.
- * @CHANNELSRV_READY:	      Channel has been initialized by server.
- */
-enum channel_serverstate {
-	CHANNELSRV_UNINITIALIZED = 0,
-	CHANNELSRV_READY = 1
-};
-
-/*
- * enum channel_clientstate
- * @CHANNELCLI_DETACHED:
- * @CHANNELCLI_DISABLED:  Client can see channel but is NOT allowed to use it
- *			  unless given TBD* explicit request
- *			  (should actually be < DETACHED).
- * @CHANNELCLI_ATTACHING: Legacy EFI client request for EFI server to attach.
- * @CHANNELCLI_ATTACHED:  Idle, but client may want to use channel any time.
- * @CHANNELCLI_BUSY:	  Client either wants to use or is using channel.
- * @CHANNELCLI_OWNED:	  "No worries" state - client can access channel
- *			  anytime.
- */
-enum channel_clientstate {
-	CHANNELCLI_DETACHED = 0,
-	CHANNELCLI_DISABLED = 1,
-	CHANNELCLI_ATTACHING = 2,
-	CHANNELCLI_ATTACHED = 3,
-	CHANNELCLI_BUSY = 4,
-	CHANNELCLI_OWNED = 5
-};
-
-/*
- * Values for VISOR_CHANNEL_PROTOCOL.Features: This define exists so that
- * a guest can look at the FeatureFlags in the io channel, and configure the
- * driver to use interrupts or not based on this setting. All feature bits for
- * all channels should be defined here. The io channel feature bits are defined
- * below.
- */
-#define VISOR_DRIVER_ENABLES_INTS (0x1ULL << 1)
-#define VISOR_CHANNEL_IS_POLLING (0x1ULL << 3)
-#define VISOR_IOVM_OK_DRIVER_DISABLING_INTS (0x1ULL << 4)
-#define VISOR_DRIVER_DISABLES_INTS (0x1ULL << 5)
-#define VISOR_DRIVER_ENHANCED_RCVBUF_CHECKING (0x1ULL << 6)
-
-/*
- * struct channel_header - Common Channel Header
- * @signature:	       Signature.
- * @legacy_state:      DEPRECATED - being replaced by.
- * @header_size:       sizeof(struct channel_header).
- * @size:	       Total size of this channel in bytes.
- * @features:	       Flags to modify behavior.
- * @chtype:	       Channel type: data, bus, control, etc..
- * @partition_handle:  ID of guest partition.
- * @handle:	       Device number of this channel in client.
- * @ch_space_offset:   Offset in bytes to channel specific area.
- * @version_id:	       Struct channel_header Version ID.
- * @partition_index:   Index of guest partition.
- * @zone_uuid:	       Guid of Channel's zone.
- * @cli_str_offset:    Offset from channel header to null-terminated
- *		       ClientString (0 if ClientString not present).
- * @cli_state_boot:    CHANNEL_CLIENTSTATE of pre-boot EFI client of this
- *		       channel.
- * @cmd_state_cli:     CHANNEL_COMMANDSTATE (overloaded in Windows drivers, see
- *		       ServerStateUp, ServerStateDown, etc).
- * @cli_state_os:      CHANNEL_CLIENTSTATE of Guest OS client of this channel.
- * @ch_characteristic: CHANNEL_CHARACTERISTIC_<xxx>.
- * @cmd_state_srv:     CHANNEL_COMMANDSTATE (overloaded in Windows drivers, see
- *		       ServerStateUp, ServerStateDown, etc).
- * @srv_state:	       CHANNEL_SERVERSTATE.
- * @cli_error_boot:    Bits to indicate err states for boot clients, so err
- *		       messages can be throttled.
- * @cli_error_os:      Bits to indicate err states for OS clients, so err
- *		       messages can be throttled.
- * @filler:	       Pad out to 128 byte cacheline.
- * @recover_channel:   Please add all new single-byte values below here.
- */
-struct channel_header {
-	u64 signature;
-	u32 legacy_state;
-	/* SrvState, CliStateBoot, and CliStateOS below */
-	u32 header_size;
-	u64 size;
-	u64 features;
-	guid_t chtype;
-	u64 partition_handle;
-	u64 handle;
-	u64 ch_space_offset;
-	u32 version_id;
-	u32 partition_index;
-	guid_t zone_guid;
-	u32 cli_str_offset;
-	u32 cli_state_boot;
-	u32 cmd_state_cli;
-	u32 cli_state_os;
-	u32 ch_characteristic;
-	u32 cmd_state_srv;
-	u32 srv_state;
-	u8 cli_error_boot;
-	u8 cli_error_os;
-	u8 filler[1];
-	u8 recover_channel;
-} __packed;
-
-#define VISOR_CHANNEL_ENABLE_INTS (0x1ULL << 0)
-
-/*
- * struct signal_queue_header - Subheader for the Signal Type variation of the
- *                              Common Channel.
- * @version:	      SIGNAL_QUEUE_HEADER Version ID.
- * @chtype:	      Queue type: storage, network.
- * @size:	      Total size of this queue in bytes.
- * @sig_base_offset:  Offset to signal queue area.
- * @features:	      Flags to modify behavior.
- * @num_sent:	      Total # of signals placed in this queue.
- * @num_overflows:    Total # of inserts failed due to full queue.
- * @signal_size:      Total size of a signal for this queue.
- * @max_slots:        Max # of slots in queue, 1 slot is always empty.
- * @max_signals:      Max # of signals in queue (MaxSignalSlots-1).
- * @head:	      Queue head signal #.
- * @num_received:     Total # of signals removed from this queue.
- * @tail:	      Queue tail signal.
- * @reserved1:	      Reserved field.
- * @reserved2:	      Reserved field.
- * @client_queue:
- * @num_irq_received: Total # of Interrupts received. This is incremented by the
- *		      ISR in the guest windows driver.
- * @num_empty:	      Number of times that visor_signal_remove is called and
- *		      returned Empty Status.
- * @errorflags:	      Error bits set during SignalReinit to denote trouble with
- *		      client's fields.
- * @filler:	      Pad out to 64 byte cacheline.
- */
-struct signal_queue_header {
-	/* 1st cache line */
-	u32 version;
-	u32 chtype;
-	u64 size;
-	u64 sig_base_offset;
-	u64 features;
-	u64 num_sent;
-	u64 num_overflows;
-	u32 signal_size;
-	u32 max_slots;
-	u32 max_signals;
-	u32 head;
-	/* 2nd cache line */
-	u64 num_received;
-	u32 tail;
-	u32 reserved1;
-	u64 reserved2;
-	u64 client_queue;
-	u64 num_irq_received;
-	u64 num_empty;
-	u32 errorflags;
-	u8 filler[12];
-} __packed;
-
-/* VISORCHANNEL Guids */
-/* {414815ed-c58c-11da-95a9-00e08161165f} */
-#define VISOR_VHBA_CHANNEL_GUID \
-	GUID_INIT(0x414815ed, 0xc58c, 0x11da, \
-		  0x95, 0xa9, 0x0, 0xe0, 0x81, 0x61, 0x16, 0x5f)
-#define VISOR_VHBA_CHANNEL_GUID_STR \
-	"414815ed-c58c-11da-95a9-00e08161165f"
-#endif

drivers/staging/unisys/visorbus/controlvmchannel.h

@@ -9,7 +9,7 @@
 
 #include <linux/uuid.h>
 
-#include "visorchannel.h"
+#include "visorbus.h"
 
 /* {2B3C2D10-7EF5-4ad8-B966-3448B7386B3D} */
 #define VISOR_CONTROLVM_CHANNEL_GUID \

drivers/staging/unisys/visorbus/vbuschannel.h

@@ -17,7 +17,7 @@
  */
 
 #include <linux/uuid.h>
-#include "visorchannel.h"
+#include "visorbus.h"
 
 /* {193b331b-c58f-11da-95a9-00e08161165f} */
 #define VISOR_VBUS_CHANNEL_GUID						\