Merge tag 'ux500-cleanup-bundle' of...

Merge tag 'ux500-cleanup-bundle' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers

Merge "Ux500 cleanups from Arnd" from Linus Walleij:

This is a set of cleanups for the Ux500 that reduce the number
of machine-local files and boardfile-type data for regulators
and ASoC.

* tag 'ux500-cleanup-bundle' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data

MAINTAINERS

@@ -1822,7 +1822,6 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.linaro.org/people/ulfh/clk.git
 S:	Maintained
 F:	drivers/clk/ux500/
-F:	include/linux/platform_data/clk-ux500.h
 
 ARM/VERSATILE EXPRESS PLATFORM
 M:	Liviu Dudau <liviu.dudau@arm.com>

arch/arm/mach-ux500/Makefile

@@ -2,11 +2,9 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= cpu.o id.o pm.o
-obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
+obj-y				:= pm.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
-obj-$(CONFIG_MACH_MOP500)	+= board-mop500-regulators.o \
-				board-mop500-audio.o
+obj-$(CONFIG_MACH_MOP500)	+= board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o

arch/arm/mach-ux500/board-mop500-regulators.h

-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
- *
- * MOP500 board specific initialization for regulators
- */
-
-#ifndef __BOARD_MOP500_REGULATORS_H
-#define __BOARD_MOP500_REGULATORS_H
-
-#include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
-
-extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data;
-extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
-extern struct regulator_init_data tps61052_regulator;
-extern struct regulator_init_data gpio_en_3v3_regulator;
-
-void mop500_regulator_init(void);
-
-#endif

arch/arm/mach-ux500/cache-l2x0.c

-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/outercache.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "db8500-regs.h"
-#include "id.h"
-
-static int __init ux500_l2x0_unlock(void)
-{
-	int i;
-	struct device_node *np;
-	void __iomem *l2x0_base;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
-	l2x0_base = of_iomap(np, 0);
-	of_node_put(np);
-	if (!l2x0_base)
-		return -ENODEV;
-
-	/*
-	 * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
-	 * apparently locks both caches before jumping to the kernel. The
-	 * l2x0 core will not touch the unlock registers if the l2x0 is
-	 * already enabled, so we do it right here instead. The PL310 has
-	 * 8 sets of registers, one per possible CPU.
-	 */
-	for (i = 0; i < 8; i++) {
-		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
-			       i * L2X0_LOCKDOWN_STRIDE);
-		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
-			       i * L2X0_LOCKDOWN_STRIDE);
-	}
-	iounmap(l2x0_base);
-	return 0;
-}
-
-static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
-{
-	/*
-	 * We can't write to secure registers as we are in non-secure
-	 * mode, until we have some SMI service available.
-	 */
-}
-
-static int __init ux500_l2x0_init(void)
-{
-	/* Multiplatform guard */
-	if (!((cpu_is_u8500_family() || cpu_is_ux540_family())))
-		return -ENODEV;
-
-	/* Unlock before init */
-	ux500_l2x0_unlock();
-	outer_cache.write_sec = ux500_l2c310_write_sec;
-	l2x0_of_init(0, ~0);
-
-	return 0;
-}
-early_initcall(ux500_l2x0_init);

arch/arm/mach-ux500/cpu-db8500.c

@@ -12,41 +12,107 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/arm-ux500-pm.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/dbx500-prcmu.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/perf/arm_pmu.h>
 #include <linux/regulator/machine.h>
-#include <linux/random.h>
 
+#include <asm/outercache.h>
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
+#include <asm/mach/arch.h>
 
 #include "setup.h"
 
-#include "board-mop500-regulators.h"
 #include "board-mop500.h"
 #include "db8500-regs.h"
-#include "id.h"
 
-static struct ab8500_platform_data ab8500_platdata = {
-	.regulator	= &ab8500_regulator_plat_data,
-};
+static int __init ux500_l2x0_unlock(void)
+{
+	int i;
+	struct device_node *np;
+	void __iomem *l2x0_base;
 
-static struct prcmu_pdata db8500_prcmu_pdata = {
-	.ab_platdata	= &ab8500_platdata,
-	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
-	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
-};
+	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+	l2x0_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!l2x0_base)
+		return -ENODEV;
+
+	/*
+	 * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
+	 * apparently locks both caches before jumping to the kernel. The
+	 * l2x0 core will not touch the unlock registers if the l2x0 is
+	 * already enabled, so we do it right here instead. The PL310 has
+	 * 8 sets of registers, one per possible CPU.
+	 */
+	for (i = 0; i < 8; i++) {
+		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+			       i * L2X0_LOCKDOWN_STRIDE);
+		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+			       i * L2X0_LOCKDOWN_STRIDE);
+	}
+	iounmap(l2x0_base);
+	return 0;
+}
+
+static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+	/*
+	 * We can't write to secure registers as we are in non-secure
+	 * mode, until we have some SMI service available.
+	 */
+}
 
-static void __init u8500_map_io(void)
+/*
+ * FIXME: Should we set up the GPIO domain here?
+ *
+ * The problem is that we cannot put the interrupt resources into the platform
+ * device until the irqdomain has been added. Right now, we set the GIC interrupt
+ * domain from init_irq(), then load the gpio driver from
+ * core_initcall(nmk_gpio_init) and add the platform devices from
+ * arch_initcall(customize_machine).
+ *
+ * This feels fragile because it depends on the gpio device getting probed
+ * _before_ any device uses the gpio interrupts.
+*/
+static void __init ux500_init_irq(void)
+{
+	struct device_node *np;
+	struct resource r;
+
+	irqchip_init();
+	np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
+	of_address_to_resource(np, 0, &r);
+	of_node_put(np);
+	if (!r.start) {
+		pr_err("could not find PRCMU base resource\n");
+		return;
+	}
+	prcmu_early_init(r.start, r.end-r.start);
+	ux500_pm_init(r.start, r.end-r.start);
+
+	/* Unlock before init */
+	ux500_l2x0_unlock();
+	outer_cache.write_sec = ux500_l2c310_write_sec;
+}
+
+static void ux500_restart(enum reboot_mode mode, const char *cmd)
 {
-	debug_ll_io_init();
-	ux500_setup_id();
+	local_irq_disable();
+	local_fiq_disable();
+
+	prcmu_system_reset(0);
 }
 
 /*
@@ -73,31 +139,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = {
 	.handle_irq		= db8500_pmu_handler,
 };
 
-static const char *db8500_read_soc_id(void)
-{
-	void __iomem *uid;
-	const char *retstr;
-
-	uid = ioremap(U8500_BB_UID_BASE, 0x20);
-	if (!uid)
-		return NULL;
-	/* Throw these device-specific numbers into the entropy pool */
-	add_device_randomness(uid, 0x14);
-	retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
-			 readl((u32 *)uid+0),
-			 readl((u32 *)uid+1), readl((u32 *)uid+2),
-			 readl((u32 *)uid+3), readl((u32 *)uid+4));
-	iounmap(uid);
-	return retstr;
-}
-
-static struct device * __init db8500_soc_device_init(void)
-{
-	const char *soc_id = db8500_read_soc_id();
-
-	return ux500_soc_device_init(soc_id);
-}
-
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
@@ -111,8 +152,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
 		       "ux500-msp-i2s.3", &msp3_platform_data),
 	/* Requires non-DT:able platform data. */
-	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
-			&db8500_prcmu_pdata),
+	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
 	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
@@ -121,8 +161,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 };
 
 static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
-			&db8500_prcmu_pdata),
+	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
 	{},
 };
 
@@ -136,15 +175,13 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
 
 static void __init u8500_init_machine(void)
 {
-	struct device *parent = db8500_soc_device_init();
-
 	/* automatically probe child nodes of dbx5x0 devices */
 	if (of_machine_is_compatible("st-ericsson,u8540"))
 		of_platform_populate(NULL, u8500_local_bus_nodes,
-				     u8540_auxdata_lookup, parent);
+				     u8540_auxdata_lookup, NULL);
 	else
 		of_platform_populate(NULL, u8500_local_bus_nodes,
-				     u8500_auxdata_lookup, parent);
+				     u8500_auxdata_lookup, NULL);
 }
 
 static const char * stericsson_dt_platform_compat[] = {
@@ -156,10 +193,10 @@ static const char * stericsson_dt_platform_compat[] = {
 };
 
 DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
-	.map_io		= u8500_map_io,
+	.l2c_aux_val    = 0,
+	.l2c_aux_mask	= ~0,
 	.init_irq	= ux500_init_irq,
 	.init_machine	= u8500_init_machine,
-	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
 	.restart        = ux500_restart,
 MACHINE_END

arch/arm/mach-ux500/cpu.c

-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mfd/dbx500-prcmu.h>
-#include <linux/sys_soc.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/irq.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-ux500.h>
-#include <linux/platform_data/arm-ux500-pm.h>
-
-#include <asm/mach/map.h>
-
-#include "setup.h"
-
-#include "board-mop500.h"
-#include "db8500-regs.h"
-#include "id.h"
-
-void ux500_restart(enum reboot_mode mode, const char *cmd)
-{
-	local_irq_disable();
-	local_fiq_disable();
-
-	prcmu_system_reset(0);
-}
-
-/*
- * FIXME: Should we set up the GPIO domain here?
- *
- * The problem is that we cannot put the interrupt resources into the platform
- * device until the irqdomain has been added. Right now, we set the GIC interrupt
- * domain from init_irq(), then load the gpio driver from
- * core_initcall(nmk_gpio_init) and add the platform devices from
- * arch_initcall(customize_machine).
- *
- * This feels fragile because it depends on the gpio device getting probed
- * _before_ any device uses the gpio interrupts.
-*/
-void __init ux500_init_irq(void)
-{
-	struct device_node *np;
-	struct resource r;
-
-	irqchip_init();
-	np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
-	of_address_to_resource(np, 0, &r);
-	of_node_put(np);
-	if (!r.start) {
-		pr_err("could not find PRCMU base resource\n");
-		return;
-	}
-	prcmu_early_init(r.start, r.end-r.start);
-	ux500_pm_init(r.start, r.end-r.start);
-
-	/*
-	 * Init clocks here so that they are available for system timer
-	 * initialization.
-	 */
-	if (cpu_is_u8500_family())
-		u8500_clk_init();
-	else if (cpu_is_u9540())
-		u9540_clk_init();
-	else if (cpu_is_u8540())
-		u8540_clk_init();
-}
-
-static const char * __init ux500_get_machine(void)
-{
-	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
-}
-
-static const char * __init ux500_get_family(void)
-{
-	return kasprintf(GFP_KERNEL, "ux500");
-}
-
-static const char * __init ux500_get_revision(void)
-{
-	unsigned int rev = dbx500_revision();
-
-	if (rev == 0x01)
-		return kasprintf(GFP_KERNEL, "%s", "ED");
-	else if (rev >= 0xA0)
-		return kasprintf(GFP_KERNEL, "%d.%d",
-				 (rev >> 4) - 0xA + 1, rev & 0xf);
-
-	return kasprintf(GFP_KERNEL, "%s", "Unknown");
-}
-
-static ssize_t ux500_get_process(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	if (dbx500_id.process == 0x00)
-		return sprintf(buf, "Standard\n");
-
-	return sprintf(buf, "%02xnm\n", dbx500_id.process);
-}
-
-static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
-				     const char *soc_id)
-{
-	soc_dev_attr->soc_id   = soc_id;
-	soc_dev_attr->machine  = ux500_get_machine();
-	soc_dev_attr->family   = ux500_get_family();
-	soc_dev_attr->revision = ux500_get_revision();
-}
-
-static const struct device_attribute ux500_soc_attr =
-	__ATTR(process,  S_IRUGO, ux500_get_process,  NULL);
-
-struct device * __init ux500_soc_device_init(const char *soc_id)
-{
-	struct device *parent;
-	struct soc_device *soc_dev;
-	struct soc_device_attribute *soc_dev_attr;
-
-	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
-		return ERR_PTR(-ENOMEM);
-
-	soc_info_populate(soc_dev_attr, soc_id);
-
-	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR(soc_dev)) {
-	        kfree(soc_dev_attr);
-		return NULL;
-	}
-
-	parent = soc_device_to_device(soc_dev);
-	device_create_file(parent, &ux500_soc_attr);
-
-	return parent;
-}

arch/arm/mach-ux500/id.h

-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_UX500_ID
-#define __MACH_UX500_ID
-
-/**
- * struct dbx500_asic_id - fields of the ASIC ID
- * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
- * @partnumber: hithereto 0x8500 for DB8500
- * @revision: version code in the series
- */
-struct dbx500_asic_id {
-	u16	partnumber;
-	u8	revision;
-	u8	process;
-};
-
-extern struct dbx500_asic_id dbx500_id;
-
-static inline unsigned int __attribute_const__ dbx500_partnumber(void)
-{
-	return dbx500_id.partnumber;
-}
-
-static inline unsigned int __attribute_const__ dbx500_revision(void)
-{
-	return dbx500_id.revision;
-}
-
-/*
- * SOCs
- */
-
-static inline bool __attribute_const__ cpu_is_u8500(void)
-{
-	return dbx500_partnumber() == 0x8500;
-}
-
-static inline bool __attribute_const__ cpu_is_u8520(void)
-{
-	return dbx500_partnumber() == 0x8520;
-}
-
-static inline bool cpu_is_u8500_family(void)
-{
-	return cpu_is_u8500() || cpu_is_u8520();
-}
-
-static inline bool __attribute_const__ cpu_is_u9540(void)
-{
-	return dbx500_partnumber() == 0x9540;
-}
-
-static inline bool __attribute_const__ cpu_is_u8540(void)
-{
-	return dbx500_partnumber() == 0x8540;
-}
-
-static inline bool __attribute_const__ cpu_is_u8580(void)
-{
-	return dbx500_partnumber() == 0x8580;
-}
-
-static inline bool cpu_is_ux540_family(void)
-{
-	return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580();
-}
-
-/*
- * 8500 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u8500ed(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0x00;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v1(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v10(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v11(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0xA1;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v2(void)
-{
-	return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
-}
-
-static inline bool cpu_is_u8500v20(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() == 0xB0);
-}
-
-static inline bool cpu_is_u8500v21(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() == 0xB1);
-}
-
-static inline bool cpu_is_u8500v22(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() == 0xB2);
-}
-
-static inline bool cpu_is_u8500v20_or_later(void)
-{
-	return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
-}
-
-/*
- * 8540 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u8540v10(void)
-{
-	return cpu_is_u8540() && dbx500_revision() == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8580v10(void)
-{
-	return cpu_is_u8580() && dbx500_revision() == 0xA0;
-}
-
-static inline bool ux500_is_svp(void)
-{
-	return false;
-}
-
-#define ux500_unknown_soc()	BUG()
-
-#endif

arch/arm/mach-ux500/platsmp.c

@@ -26,7 +26,6 @@
 #include "setup.h"
 
 #include "db8500-regs.h"
-#include "id.h"
 
 /* Magic triggers in backup RAM */
 #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4

arch/arm/mach-ux500/setup.h

@@ -11,18 +11,6 @@
 #ifndef __ASM_ARCH_SETUP_H
 #define __ASM_ARCH_SETUP_H
 
-#include <asm/mach/arch.h>
-#include <linux/init.h>
-#include <linux/mfd/abx500/ab8500.h>
-
-void ux500_restart(enum reboot_mode mode, const char *cmd);
-
-void __init ux500_setup_id(void);
-
-extern void __init ux500_init_irq(void);
-
-extern struct device *ux500_soc_device_init(const char *soc_id);
-
 extern void ux500_cpu_die(unsigned int cpu);
 
 #endif /*  __ASM_ARCH_SETUP_H */

drivers/clk/ux500/u8500_of_clk.c

@@ -11,7 +11,6 @@
 #include <linux/of_address.h>
 #include <linux/clk-provider.h>
 #include <linux/mfd/dbx500-prcmu.h>
-#include <linux/platform_data/clk-ux500.h>
 #include "clk.h"
 
 #define PRCC_NUM_PERIPH_CLUSTERS 6
@@ -48,11 +47,6 @@ static struct clk *ux500_twocell_get(struct of_phandle_args *clkspec,
 	return PRCC_SHOW(clk_data, base, bit);
 }
 
-static const struct of_device_id u8500_clk_of_match[] = {
-	{ .compatible = "stericsson,u8500-clks", },
-	{ },
-};
-
 /* CLKRST4 is missing making it hard to index things */
 enum clkrst_index {
 	CLKRST1_INDEX = 0,
@@ -63,22 +57,15 @@ enum clkrst_index {
 	CLKRST_MAX,
 };
 
-void u8500_clk_init(void)
+static void u8500_clk_init(struct device_node *np)
 {
 	struct prcmu_fw_version *fw_version;
-	struct device_node *np = NULL;
 	struct device_node *child = NULL;
 	const char *sgaclk_parent = NULL;
 	struct clk *clk, *rtc_clk, *twd_clk;
 	u32 bases[CLKRST_MAX];
 	int i;
 
-	if (of_have_populated_dt())
-		np = of_find_matching_node(NULL, u8500_clk_of_match);
-	if (!np) {
-		pr_err("Either DT or U8500 Clock node not found\n");
-		return;
-	}
 	for (i = 0; i < ARRAY_SIZE(bases); i++) {
 		struct resource r;
 
@@ -573,3 +560,4 @@ void u8500_clk_init(void)
 			of_clk_add_provider(child, of_clk_src_simple_get, twd_clk);
 	}
 }
+CLK_OF_DECLARE(u8500_clks, "stericsson,u8500-clks", u8500_clk_init);

drivers/clk/ux500/u8540_clk.c

@@ -12,14 +12,8 @@
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/mfd/dbx500-prcmu.h>
-#include <linux/platform_data/clk-ux500.h>
 #include "clk.h"
 
-static const struct of_device_id u8540_clk_of_match[] = {
-	{ .compatible = "stericsson,u8540-clks", },
-	{ }
-};
-
 /* CLKRST4 is missing making it hard to index things */
 enum clkrst_index {
 	CLKRST1_INDEX = 0,
@@ -30,19 +24,12 @@ enum clkrst_index {
 	CLKRST_MAX,
 };
 
-void u8540_clk_init(void)
+static void u8540_clk_init(struct device_node *np)
 {
 	struct clk *clk;
-	struct device_node *np = NULL;
 	u32 bases[CLKRST_MAX];
 	int i;
 
-	if (of_have_populated_dt())
-		np = of_find_matching_node(NULL, u8540_clk_of_match);
-	if (!np) {
-		pr_err("Either DT or U8540 Clock node not found\n");
-		return;
-	}
 	for (i = 0; i < ARRAY_SIZE(bases); i++) {
 		struct resource r;
 
@@ -607,3 +594,4 @@ void u8540_clk_init(void)
 			bases[CLKRST6_INDEX], BIT(0), CLK_SET_RATE_GATE);
 	clk_register_clkdev(clk, NULL, "rng");
 }
+CLK_OF_DECLARE(u8540_clks, "stericsson,u8540-clks", u8540_clk_init);

drivers/clk/ux500/u9540_clk.c

@@ -9,10 +9,10 @@
 
 #include <linux/clk-provider.h>
 #include <linux/mfd/dbx500-prcmu.h>
-#include <linux/platform_data/clk-ux500.h>
 #include "clk.h"
 
-void u9540_clk_init(void)
+static void u9540_clk_init(struct device_node *np)
 {
 	/* register clocks here */
 }
+CLK_OF_DECLARE(u9540_clks, "stericsson,u9540-clks", u9540_clk_init);

drivers/mfd/ab8500-core.c

@@ -1087,7 +1087,6 @@ static int ab8500_probe(struct platform_device *pdev)
 		"Vbus Detect (USB)",
 		"USB ID Detect",
 		"UART Factory Mode Detect"};
-	struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev);
 	const struct platform_device_id *platid = platform_get_device_id(pdev);
 	enum ab8500_version version = AB8500_VERSION_UNDEFINED;
 	struct device_node *np = pdev->dev.of_node;
@@ -1219,9 +1218,6 @@ static int ab8500_probe(struct platform_device *pdev)
 		pr_cont("None\n");
 	}
 
-	if (plat && plat->init)
-		plat->init(ab8500);
-
 	if (is_ab9540(ab8500)) {
 		ret = get_register_interruptible(ab8500, AB8500_CHARGER,
 			AB8500_CH_USBCH_STAT1_REG, &value);

drivers/mfd/ab8500-sysctrl.c

@@ -127,45 +127,11 @@ EXPORT_SYMBOL(ab8500_sysctrl_write);
 
 static int ab8500_sysctrl_probe(struct platform_device *pdev)
 {
-	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
-	struct ab8500_platform_data *plat;
-	struct ab8500_sysctrl_platform_data *pdata;
-
-	plat = dev_get_platdata(pdev->dev.parent);
-
-	if (!plat)
-		return -EINVAL;
-
 	sysctrl_dev = &pdev->dev;
 
 	if (!pm_power_off)
 		pm_power_off = ab8500_power_off;
 
-	pdata = plat->sysctrl;
-	if (pdata) {
-		int last, ret, i, j;
-
-		if (is_ab8505(ab8500))
-			last = AB8500_SYSCLKREQ4RFCLKBUF;
-		else
-			last = AB8500_SYSCLKREQ8RFCLKBUF;
-
-		for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) {
-			j = i - AB8500_SYSCLKREQ1RFCLKBUF;
-			ret = ab8500_sysctrl_write(i, 0xff,
-					pdata->initial_req_buf_config[j]);
-			dev_dbg(&pdev->dev,
-					"Setting SysClkReq%dRfClkBuf 0x%X\n",
-					j + 1,
-					pdata->initial_req_buf_config[j]);
-			if (ret < 0) {
-				dev_err(&pdev->dev,
-					"Can't set sysClkReq%dRfClkBuf: %d\n",
-					j + 1, ret);
-			}
-		}
-	}
-
 	return 0;
 }
 

drivers/mfd/db8500-prcmu.c

@@ -3094,8 +3094,7 @@ static void db8500_prcmu_update_cpufreq(void)
 	}
 }
 
-static int db8500_prcmu_register_ab8500(struct device *parent,
-					struct ab8500_platform_data *pdata)
+static int db8500_prcmu_register_ab8500(struct device *parent)
 {
 	struct device_node *np;
 	struct resource ab8500_resource;
@@ -3103,8 +3102,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent,
 		.name = "ab8500-core",
 		.of_compatible = "stericsson,ab8500",
 		.id = AB8500_VERSION_AB8500,
-		.platform_data = pdata,
-		.pdata_size = sizeof(struct ab8500_platform_data),
 		.resources = &ab8500_resource,
 		.num_resources = 1,
 	};
@@ -3133,7 +3130,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent,
 static int db8500_prcmu_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev);
 	int irq = 0, err = 0;
 	struct resource *res;
 
@@ -3149,7 +3145,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 	init_prcm_registers();
-	dbx500_fw_version_init(pdev, pdata->version_offset);
+	dbx500_fw_version_init(pdev, DB8500_PRCMU_FW_VERSION_OFFSET);
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
 	if (!res) {
 		dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
@@ -3204,7 +3200,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 		}
 	}
 
-	err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata);
+	err = db8500_prcmu_register_ab8500(&pdev->dev);
 	if (err) {
 		mfd_remove_devices(&pdev->dev);
 		pr_err("prcmu: Failed to add ab8500 subdevice\n");

drivers/soc/Kconfig

@@ -9,6 +9,7 @@ source "drivers/soc/samsung/Kconfig"
 source "drivers/soc/sunxi/Kconfig"
 source "drivers/soc/tegra/Kconfig"
 source "drivers/soc/ti/Kconfig"
+source "drivers/soc/ux500/Kconfig"
 source "drivers/soc/versatile/Kconfig"
 
 endmenu

drivers/soc/Makefile

@@ -14,4 +14,5 @@ obj-$(CONFIG_SOC_SAMSUNG)	+= samsung/
 obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_SOC_TI)		+= ti/
+obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_PLAT_VERSATILE)	+= versatile/

drivers/soc/ux500/Kconfig

+config UX500_SOC_ID
+	bool "SoC bus for ST-Ericsson ux500"
+	depends on ARCH_U8500 || COMPILE_TEST
+	default ARCH_U8500
+	help
+	  Include support for the SoC bus on the ARM RealView platforms
+	  providing some sysfs information about the ASIC variant.

drivers/soc/ux500/Makefile

+obj-$(CONFIG_UX500_SOC_ID) += ux500-soc-id.o

arch/arm/mach-ux500/id.c → drivers/soc/ux500/ux500-soc-id.c

@@ -8,43 +8,51 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/module.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/sys_soc.h>
 
 #include <asm/cputype.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 #include <asm/mach/map.h>
 
-#include "setup.h"
-
-#include "db8500-regs.h"
-#include "id.h"
+/**
+ * struct dbx500_asic_id - fields of the ASIC ID
+ * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
+ * @partnumber: hithereto 0x8500 for DB8500
+ * @revision: version code in the series
+ */
+struct dbx500_asic_id {
+	u16	partnumber;
+	u8	revision;
+	u8	process;
+};
 
-struct dbx500_asic_id dbx500_id;
+static struct dbx500_asic_id dbx500_id;
 
 static unsigned int __init ux500_read_asicid(phys_addr_t addr)
 {
-	phys_addr_t base = addr & ~0xfff;
-	struct map_desc desc = {
-		.virtual	= (unsigned long)UX500_VIRT_ROM,
-		.pfn		= __phys_to_pfn(base),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	};
+	void __iomem *virt = ioremap(addr, 4);
+	unsigned int asicid;
 
-	iotable_init(&desc, 1);
+	if (!virt)
+		return 0;
 
-	/* As in devicemaps_init() */
-	local_flush_tlb_all();
-	flush_cache_all();
+	asicid = readl(virt);
+	iounmap(virt);
 
-	return readl(UX500_VIRT_ROM + (addr & 0xfff));
+	return asicid;
 }
 
 static void ux500_print_soc_info(unsigned int asicid)
 {
-	unsigned int rev = dbx500_revision();
+	unsigned int rev = dbx500_id.revision;
 
-	pr_info("DB%4x ", dbx500_partnumber());
+	pr_info("DB%4x ", dbx500_id.partnumber);
 
 	if (rev == 0x01)
 		pr_cont("Early Drop");
@@ -72,7 +80,7 @@ static unsigned int partnumber(unsigned int asicid)
  * DB9540	0x413fc090	0xFFFFDBF4		0x009540xx
  */
 
-void __init ux500_setup_id(void)
+static void __init ux500_setup_id(void)
 {
 	unsigned int cpuid = read_cpuid_id();
 	unsigned int asicid = 0;
@@ -105,7 +113,7 @@ void __init ux500_setup_id(void)
 
 	if (!asicid) {
 		pr_err("Unable to identify SoC\n");
-		ux500_unknown_soc();
+		BUG();
 	}
 
 	dbx500_id.process = asicid >> 24;
@@ -114,3 +122,101 @@ void __init ux500_setup_id(void)
 
 	ux500_print_soc_info(asicid);
 }
+
+static const char * __init ux500_get_machine(void)
+{
+	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_id.partnumber);
+}
+
+static const char * __init ux500_get_family(void)
+{
+	return kasprintf(GFP_KERNEL, "ux500");
+}
+
+static const char * __init ux500_get_revision(void)
+{
+	unsigned int rev = dbx500_id.revision;
+
+	if (rev == 0x01)
+		return kasprintf(GFP_KERNEL, "%s", "ED");
+	else if (rev >= 0xA0)
+		return kasprintf(GFP_KERNEL, "%d.%d",
+				 (rev >> 4) - 0xA + 1, rev & 0xf);
+
+	return kasprintf(GFP_KERNEL, "%s", "Unknown");
+}
+
+static ssize_t ux500_get_process(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	if (dbx500_id.process == 0x00)
+		return sprintf(buf, "Standard\n");
+
+	return sprintf(buf, "%02xnm\n", dbx500_id.process);
+}
+
+static const char *db8500_read_soc_id(struct device_node *backupram)
+{
+	void __iomem *base;
+	void __iomem *uid;
+	const char *retstr;
+
+	base = of_iomap(backupram, 0);
+	if (!base)
+		return NULL;
+	uid = base + 0x1fc0;
+
+	/* Throw these device-specific numbers into the entropy pool */
+	add_device_randomness(uid, 0x14);
+	retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
+			 readl((u32 *)uid+0),
+			 readl((u32 *)uid+1), readl((u32 *)uid+2),
+			 readl((u32 *)uid+3), readl((u32 *)uid+4));
+	iounmap(base);
+	return retstr;
+}
+
+static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
+				     struct device_node *backupram)
+{
+	soc_dev_attr->soc_id   = db8500_read_soc_id(backupram);
+	soc_dev_attr->machine  = ux500_get_machine();
+	soc_dev_attr->family   = ux500_get_family();
+	soc_dev_attr->revision = ux500_get_revision();
+}
+
+static const struct device_attribute ux500_soc_attr =
+	__ATTR(process,  S_IRUGO, ux500_get_process,  NULL);
+
+static int __init ux500_soc_device_init(void)
+{
+	struct device *parent;
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+	struct device_node *backupram;
+
+	backupram = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram");
+	if (!backupram)
+		return 0;
+
+	ux500_setup_id();
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_info_populate(soc_dev_attr, backupram);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+	        kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
+	}
+
+	parent = soc_device_to_device(soc_dev);
+	device_create_file(parent, &ux500_soc_attr);
+
+	return 0;
+}
+subsys_initcall(ux500_soc_device_init);

include/linux/mfd/abx500/ab8500-sysctrl.h

@@ -37,12 +37,6 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
 	return ab8500_sysctrl_write(reg, bits, 0);
 }
 
-/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */
-struct ab8500_sysctrl_platform_data {
-	u8 initial_req_buf_config[8];
-	u16 (*reboot_reason_code)(const char *cmd);
-};
-
 /* Registers */
 #define AB8500_TURNONSTATUS		0x100
 #define AB8500_RESETSTATUS		0x101

include/linux/mfd/dbx500-prcmu.h

@@ -178,16 +178,6 @@ enum ddr_pwrst {
 
 #define DB8500_PRCMU_LEGACY_OFFSET		0xDD4
 
-struct prcmu_pdata
-{
-	bool enable_set_ddr_opp;
-	bool enable_ape_opp_100_voltage;
-	struct ab8500_platform_data *ab_platdata;
-	u32 version_offset;
-	u32 legacy_offset;
-	u32 adt_offset;
-};
-
 #define PRCMU_FW_PROJECT_U8500		2
 #define PRCMU_FW_PROJECT_U8400		3
 #define PRCMU_FW_PROJECT_U9500		4 /* Customer specific */

include/linux/platform_data/clk-ux500.h

-/*
- * Clock definitions for ux500 platforms
- *
- * Copyright (C) 2012 ST-Ericsson SA
- * Author: Ulf Hansson <ulf.hansson@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __CLK_UX500_H
-#define __CLK_UX500_H
-
-void u8500_clk_init(void);
-void u9540_clk_init(void);
-void u8540_clk_init(void);
-
-#endif /* __CLK_UX500_H */

sound/soc/codecs/ab8500-codec.c

@@ -2464,45 +2464,20 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec)
 	struct device *dev = codec->dev;
 	struct device_node *np = dev->of_node;
 	struct ab8500_codec_drvdata *drvdata = dev_get_drvdata(dev);
-	struct ab8500_platform_data *pdata;
+	struct ab8500_codec_platform_data codec_pdata;
 	struct filter_control *fc;
 	int status;
 
 	dev_dbg(dev, "%s: Enter.\n", __func__);
 
-	/* Setup AB8500 according to board-settings */
-	pdata = dev_get_platdata(dev->parent);
+	ab8500_codec_of_probe(dev, np, &codec_pdata);
 
-	if (np) {
-		if (!pdata)
-			pdata = devm_kzalloc(dev,
-					sizeof(struct ab8500_platform_data),
-					GFP_KERNEL);
-
-		if (pdata && !pdata->codec)
-			pdata->codec
-				= devm_kzalloc(dev,
-					sizeof(struct ab8500_codec_platform_data),
-					GFP_KERNEL);
-
-		if (!(pdata && pdata->codec))
-			return -ENOMEM;
-
-		ab8500_codec_of_probe(dev, np, pdata->codec);
-
-	} else {
-		if (!(pdata && pdata->codec)) {
-			dev_err(dev, "No codec platform data or DT found\n");
-			return -EINVAL;
-		}
-	}
-
-	status = ab8500_audio_setup_mics(codec, &pdata->codec->amics);
+	status = ab8500_audio_setup_mics(codec, &codec_pdata.amics);
 	if (status < 0) {
 		pr_err("%s: Failed to setup mics (%d)!\n", __func__, status);
 		return status;
 	}
-	status = ab8500_audio_set_ear_cmv(codec, pdata->codec->ear_cmv);
+	status = ab8500_audio_set_ear_cmv(codec, codec_pdata.ear_cmv);
 	if (status < 0) {
 		pr_err("%s: Failed to set earpiece CM-voltage (%d)!\n",
 			__func__, status);