Commit f3156851 authored by Vineet Gupta's avatar Vineet Gupta

ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer

Print the hardware support for ECC, Loop Buffer as well as the runtime
enabled status

Note that unlike the existing boot printing, this one is not read from
pre-decoded hardware capabilty info cached in cpuinfo[] struct.
Instead we read the AUX regs on the spot and print it, without botherign
to save anywhere.

There is no point in saving static hardware capabilites in memory when
its use is very sporadic and non-performance critical, mainly for
/proc/cpuinfo. This gets worse in SMP, given it is per-cpu, and pretty
much exactly same across all cpus. So only info needed at runtime
(e.g. TLB geometry) needs to be cached in cpuinfo[]. So going fwd
we will start converting code to this paradigm.
Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
parent 92d44128
......@@ -11,12 +11,14 @@
/* Build Configuration Registers */
#define ARC_REG_AUX_DCCM 0x18 /* DCCM Base Addr ARCv2 */
#define ARC_REG_ERP_CTRL 0x3F /* ARCv2 Error protection control */
#define ARC_REG_DCCM_BASE_BUILD 0x61 /* DCCM Base Addr ARCompact */
#define ARC_REG_CRC_BCR 0x62
#define ARC_REG_VECBASE_BCR 0x68
#define ARC_REG_PERIBASE_BCR 0x69
#define ARC_REG_FP_BCR 0x6B /* ARCompact: Single-Precision FPU */
#define ARC_REG_DPFP_BCR 0x6C /* ARCompact: Dbl Precision FPU */
#define ARC_REG_ERP_BUILD 0xc7 /* ARCv2 Error protection Build: ECC/Parity */
#define ARC_REG_FP_V2_BCR 0xc8 /* ARCv2 FPU */
#define ARC_REG_SLC_BCR 0xce
#define ARC_REG_DCCM_BUILD 0x74 /* DCCM size (common) */
......@@ -32,11 +34,14 @@
#define ARC_REG_D_UNCACH_BCR 0x6A
#define ARC_REG_BPU_BCR 0xc0
#define ARC_REG_ISA_CFG_BCR 0xc1
#define ARC_REG_LPB_BUILD 0xE9 /* ARCv2 Loop Buffer Build */
#define ARC_REG_RTT_BCR 0xF2
#define ARC_REG_IRQ_BCR 0xF3
#define ARC_REG_MICRO_ARCH_BCR 0xF9 /* ARCv2 Product revision */
#define ARC_REG_SMART_BCR 0xFF
#define ARC_REG_CLUSTER_BCR 0xcf
#define ARC_REG_AUX_ICCM 0x208 /* ICCM Base Addr (ARCv2) */
#define ARC_REG_LPB_CTRL 0x488 /* ARCv2 Loop Buffer control */
/* Common for ARCompact and ARCv2 status register */
#define ARC_REG_STATUS32 0x0A
......@@ -229,6 +234,32 @@ struct bcr_bpu_arcv2 {
#endif
};
/* Error Protection Build: ECC/Parity */
struct bcr_erp {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad3:5, mmu:3, pad2:4, ic:3, dc:3, pad1:6, ver:8;
#else
unsigned int ver:8, pad1:6, dc:3, ic:3, pad2:4, mmu:3, pad3:5;
#endif
};
/* Error Protection Control */
struct ctl_erp {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad2:27, mpd:1, pad1:2, dpd:1, dpi:1;
#else
unsigned int dpi:1, dpd:1, pad1:2, mpd:1, pad2:27;
#endif
};
struct bcr_lpb {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:16, entries:8, ver:8;
#else
unsigned int ver:8, entries:8, pad:16;
#endif
};
struct bcr_generic {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int info:24, ver:8;
......@@ -270,7 +301,7 @@ struct cpuinfo_arc {
struct cpuinfo_arc_ccm iccm, dccm;
struct {
unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
fpu_sp:1, fpu_dp:1, dual_iss_enb:1, dual_iss_exist:1, pad2:4,
fpu_sp:1, fpu_dp:1, dual:1, dual_enb:1, pad2:4,
debug:1, ap:1, smart:1, rtt:1, pad3:4,
timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
} extn;
......
......@@ -199,8 +199,10 @@ static void read_arc_build_cfg_regs(void)
unsigned int exec_ctrl;
READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
cpu->extn.dual_iss_exist = 1;
cpu->extn.dual_iss_enb = exec_ctrl & 1;
cpu->extn.dual_enb = exec_ctrl & 1;
/* dual issue always present for this core */
cpu->extn.dual = 1;
}
}
......@@ -253,7 +255,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
cpu_id, cpu->name, cpu->details,
is_isa_arcompact() ? "ARCompact" : "ARCv2",
IS_AVAIL1(cpu->isa.be, "[Big-Endian]"),
IS_AVAIL3(cpu->extn.dual_iss_exist, cpu->extn.dual_iss_enb, " Dual-Issue"));
IS_AVAIL3(cpu->extn.dual, cpu->extn.dual_enb, " Dual-Issue "));
n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ",
IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
......@@ -293,11 +295,26 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
if (cpu->bpu.ver)
n += scnprintf(buf + n, len - n,
"BPU\t\t: %s%s match, cache:%d, Predict Table:%d\n",
"BPU\t\t: %s%s match, cache:%d, Predict Table:%d",
IS_AVAIL1(cpu->bpu.full, "full"),
IS_AVAIL1(!cpu->bpu.full, "partial"),
cpu->bpu.num_cache, cpu->bpu.num_pred);
if (is_isa_arcv2()) {
struct bcr_lpb lpb;
READ_BCR(ARC_REG_LPB_BUILD, lpb);
if (lpb.ver) {
unsigned int ctl;
ctl = read_aux_reg(ARC_REG_LPB_CTRL);
n += scnprintf(buf + n, len - n, " Loop Buffer:%d %s",
lpb.entries,
IS_DISABLED_RUN(!ctl));
}
}
n += scnprintf(buf + n, len - n, "\n");
return buf;
}
......@@ -326,6 +343,24 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
cpu->dccm.base_addr, TO_KB(cpu->dccm.sz),
cpu->iccm.base_addr, TO_KB(cpu->iccm.sz));
if (is_isa_arcv2()) {
/* Error Protection: ECC/Parity */
struct bcr_erp erp;
READ_BCR(ARC_REG_ERP_BUILD, erp);
if (erp.ver) {
struct ctl_erp ctl;
READ_BCR(ARC_REG_ERP_CTRL, ctl);
/* inverted bits: 0 means enabled */
n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n",
IS_AVAIL3(erp.ic, !ctl.dpi, "IC "),
IS_AVAIL3(erp.dc, !ctl.dpd, "DC "),
IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU "));
}
}
n += scnprintf(buf + n, len - n, "OS ABI [v%d]\t: %s\n",
EF_ARC_OSABI_CURRENT >> 8,
EF_ARC_OSABI_CURRENT == EF_ARC_OSABI_V3 ?
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment