Commit f447ed8b authored by Olof Johansson's avatar Olof Johansson Committed by Linus Walleij

gpio: samsung: add flags specifier to device-tree binding

This adds a flags field to the gpio specifier for Samsung. I didn't
want to add yet another field in the already quite long specifier, so
I decided to compress it together with the Pull Up/Down settings instead.

This is needed to, for example, have a gpio-keys input that is active low.
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 31ba56f2
......@@ -11,14 +11,15 @@ Required properties:
<[phandle of the gpio controller node]
[pin number within the gpio controller]
[mux function]
[pull up/down]
[flags and pull up/down]
[drive strength]>
Values for gpio specifier:
- Pin number: is a value between 0 to 7.
- Pull Up/Down: 0 - Pull Up/Down Disabled.
1 - Pull Down Enabled.
3 - Pull Up Enabled.
- Flags and Pull Up/Down: 0 - Pull Up/Down Disabled.
1 - Pull Down Enabled.
3 - Pull Up Enabled.
Bit 16 (0x00010000) - Input is active low.
- Drive Strength: 0 - 1x,
1 - 3x,
2 - 2x,
......
......@@ -2681,11 +2681,14 @@ static int exynos_gpio_xlate(struct gpio_chip *gc,
if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
pr_warn("gpio_xlate: failed to set pin function\n");
if (s3c_gpio_setpull(pin, gpiospec->args[2]))
if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff))
pr_warn("gpio_xlate: failed to set pin pull up/down\n");
if (s5p_gpio_set_drvstr(pin, gpiospec->args[3]))
pr_warn("gpio_xlate: failed to set pin drive strength\n");
if (flags)
*flags = gpiospec->args[2] >> 16;
return gpiospec->args[0];
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment