target: Correct sense key for INVALID FIELD IN {PARAMETER LIST,CDB}

commit 9fbc8909 upstream.

According to SPC-4, the sense key for commands that are failed with
INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be
ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh).  Without this
patch, a tcm_loop LUN incorrectly gives:

    # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0
    Sense Information:
     Fixed format, current;  Sense key: Aborted Command
     Additional sense: Invalid field in cdb
     Raw sense data (in hex):
            70 00 0b 00 00 00 00 0a  00 00 00 00 24 00 00 00
            00 00

While a real SCSI disk gives:

    Sense Information:
     Fixed format, current;  Sense key: Illegal Request
     Additional sense: Invalid field in cdb
     Raw sense data (in hex):
            70 00 05 00 00 00 00 18  00 00 00 00 24 00 00 00
            00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00

with the main point being that the real disk gives a sense key of
ILLEGAL REQUEST (5h).
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/target/target_core_transport.c

@@ -4403,8 +4403,8 @@ int transport_send_check_condition_and_sense(
 		/* CURRENT ERROR */
 		buffer[offset] = 0x70;
 		buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10;
-		/* ABORTED COMMAND */
-		buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND;
+		/* ILLEGAL REQUEST */
+		buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
 		/* INVALID FIELD IN CDB */
 		buffer[offset+SPC_ASC_KEY_OFFSET] = 0x24;
 		break;
@@ -4412,8 +4412,8 @@ int transport_send_check_condition_and_sense(
 		/* CURRENT ERROR */
 		buffer[offset] = 0x70;
 		buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10;
-		/* ABORTED COMMAND */
-		buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND;
+		/* ILLEGAL REQUEST */
+		buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST;
 		/* INVALID FIELD IN PARAMETER LIST */
 		buffer[offset+SPC_ASC_KEY_OFFSET] = 0x26;
 		break;