Commit f524dca7 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Tony Lindgren

ARM: dts: am572x-idk: Add pinmux configuration for MMC

Include dra74x-mmc-iodelay.dtsi which has pinmux and IODelay
configuration values for the various MMC modes for dra74x SoC
and use it in the pinctrl properties of MMC devicetree
nodes present in am572x-idk.dts.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 14543d85
...@@ -12,6 +12,7 @@ ...@@ -12,6 +12,7 @@
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi" #include "am57xx-idk-common.dtsi"
#include "dra74x-mmc-iodelay.dtsi"
/ { / {
model = "TI AM5728 IDK"; model = "TI AM5728 IDK";
...@@ -67,6 +68,24 @@ mmc0-led { ...@@ -67,6 +68,24 @@ mmc0-led {
}; };
}; };
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {
pinctrl-names = "default", "hs", "ddr_1_8v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};
&omap_dwc3_2 { &omap_dwc3_2 {
extcon = <&extcon_usb2>; extcon = <&extcon_usb2>;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment