Merge series "Add driver for Microchip S/PDIF RX" from Codrin Ciubotariu...

Merge series "Add driver for Microchip S/PDIF RX" from Codrin Ciubotariu <codrin.ciubotariu@microchip.com>:

The Sony/Philips Digital Interface Receiver (SPDIFRX) is a serial port
compliant with the IEC-60958 standard. Among its caracteristics, we
mention the following:
 - SPDIF/AES-EBU Compatible Serial Port
 - 32 Samples FIFO
 - Data Width Configurable to 24 bits, 20 bits or 16 bits
 - Packed and Unpacked Data Support for System Memory Optimization
 - Line State Events Report and Source of Interrupt
 - Line Error Rate Report
 - Full Memory Map of 192 bits for Channel 1 and Channel 2 Status and
   User Data
 - First 32-bit Status A, Status B Change Report and Source of Interrupt
 - Line Digital Filter
 - Register Write Protection
 - Abnormal Software Access and Internal Sequencer Integrity Check Reports

This interface is available in Microchip's SAMA7G5 SoC.

Codrin Ciubotariu (2):
  dt-bindings: sound: add DT bindings for Microchip S/PDIF RX Controller
  ASoC: mchp-spdifrx: add driver for SPDIF RX

 .../bindings/sound/mchp,spdifrx.yaml          |  73 ++
 sound/soc/atmel/Kconfig                       |  13 +
 sound/soc/atmel/Makefile                      |   2 +
 sound/soc/atmel/mchp-spdifrx.c                | 954 ++++++++++++++++++
 4 files changed, 1042 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
 create mode 100644 sound/soc/atmel/mchp-spdifrx.c

--
2.25.1

Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mchp,spdifrx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip S/PDIF Rx Controller Device Tree Bindings
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+        The Microchip Sony/Philips Digital Interface Receiver is a
+        serial port compliant with the IEC-60958 standard.
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    const: microchip,sama7g5-spdifrx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    description: RX DMA Channel
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spdifrx: spdifrx@e1614000 {
+        #sound-dai-cells = <0>;
+        compatible = "microchip,sama7g5-spdifrx";
+        reg = <0xe1614000 0x4000>;
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+        dma-names = "rx";
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+        clock-names = "pclk", "gclk";
+    };

sound/soc/atmel/Kconfig

@@ -144,4 +144,17 @@ config SND_MCHP_SOC_SPDIFTX
 
 	  This S/PDIF TX driver is compliant with IEC-60958 standard and
 	  includes programable User Data and Channel Status fields.
+
+config SND_MCHP_SOC_SPDIFRX
+	tristate "Microchip ASoC driver for boards using S/PDIF RX"
+	depends on OF && (ARCH_AT91 || COMPILE_TEST)
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select REGMAP_MMIO
+	help
+	  Say Y or M if you want to add support for Microchip S/PDIF RX ASoc
+	  driver on the following Microchip platforms:
+	  - sama7g5
+
+	  This S/PDIF RX driver is compliant with IEC-60958 standard and
+	  includes programable User Data and Channel Status fields.
 endif

sound/soc/atmel/Makefile

@@ -6,6 +6,7 @@ snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o
 snd-soc-atmel-i2s-objs := atmel-i2s.o
 snd-soc-mchp-i2s-mcc-objs := mchp-i2s-mcc.o
 snd-soc-mchp-spdiftx-objs := mchp-spdiftx.o
+snd-soc-mchp-spdifrx-objs := mchp-spdifrx.o
 
 # pdc and dma need to both be built-in if any user of
 # ssc is built-in.
@@ -19,6 +20,7 @@ obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
 obj-$(CONFIG_SND_ATMEL_SOC_I2S) += snd-soc-atmel-i2s.o
 obj-$(CONFIG_SND_MCHP_SOC_I2S_MCC) += snd-soc-mchp-i2s-mcc.o
 obj-$(CONFIG_SND_MCHP_SOC_SPDIFTX) += snd-soc-mchp-spdiftx.o
+obj-$(CONFIG_SND_MCHP_SOC_SPDIFRX) += snd-soc-mchp-spdifrx.o
 
 # AT91 Machine Support
 snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o