ARM: dts: omap3-gta04: add devconf0 setup for mcbsp1 clock pins

McBSP1 needs special "pinctrl" for the clocks.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/omap3-gta04.dtsi

@@ -187,6 +187,24 @@ wifi_pwrseq: wifi_pwrseq {
 		reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>;	/* W2CBW003 reset through tca6507 */
 	};
 
+	/* devconf0 setup for mcbsp1 clock pins */
+	pinmux_mcbsp1@48002274 {
+		compatible = "pinctrl-single";
+		reg = <0x48002274 4>;   /* CONTROL_DEVCONF0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,bit-per-mux;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7>;	/* MCBSP1 CLK pinmux */
+		#pinctrl-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcbsp1_devconf0_pins>;
+		mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
+			/*                   offset bits mask */
+			pinctrl-single,bits = <0x00 0x08 0x1c>;	/* set MCBSP1_CLKR */
+		};
+	};
+
 	/* devconf1 setup for tvout pins */
 	pinmux_tv_out@480022d8 {
 		compatible = "pinctrl-single";