Commit f5f4cf08 authored by Alexander Duyck's avatar Alexander Duyck Committed by David S. Miller

igb: do not use phy ops in ethtool test cleanup for non-copper parts

Currently the igb driver is experiencing a panic due to a null function
pointer being used during the cleanup of the ethtool looback test on
fiber/serdes parts.  This patch prevents that and adds a check prior to
calling any phy function.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 21fc578d
......@@ -332,4 +332,36 @@ extern void igb_free_rx_resources(struct igb_ring *);
extern void igb_update_stats(struct igb_adapter *);
extern void igb_set_ethtool_ops(struct net_device *);
static inline s32 igb_reset_phy(struct e1000_hw *hw)
{
if (hw->phy.ops.reset_phy)
return hw->phy.ops.reset_phy(hw);
return 0;
}
static inline s32 igb_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data)
{
if (hw->phy.ops.read_phy_reg)
return hw->phy.ops.read_phy_reg(hw, offset, data);
return 0;
}
static inline s32 igb_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data)
{
if (hw->phy.ops.write_phy_reg)
return hw->phy.ops.write_phy_reg(hw, offset, data);
return 0;
}
static inline s32 igb_get_phy_info(struct e1000_hw *hw)
{
if (hw->phy.ops.get_phy_info)
return hw->phy.ops.get_phy_info(hw);
return 0;
}
#endif /* _IGB_H_ */
......@@ -1376,10 +1376,10 @@ static void igb_phy_disable_receiver(struct igb_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
/* Write out to PHY registers 29 and 30 to disable the Receiver. */
hw->phy.ops.write_phy_reg(hw, 29, 0x001F);
hw->phy.ops.write_phy_reg(hw, 30, 0x8FFC);
hw->phy.ops.write_phy_reg(hw, 29, 0x001A);
hw->phy.ops.write_phy_reg(hw, 30, 0x8FF0);
igb_write_phy_reg(hw, 29, 0x001F);
igb_write_phy_reg(hw, 30, 0x8FFC);
igb_write_phy_reg(hw, 29, 0x001A);
igb_write_phy_reg(hw, 30, 0x8FF0);
}
static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
......@@ -1392,17 +1392,17 @@ static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
if (hw->phy.type == e1000_phy_m88) {
/* Auto-MDI/MDIX Off */
hw->phy.ops.write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
/* reset to update Auto-MDI/MDIX */
hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x9140);
igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
/* autoneg off */
hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x8140);
igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
}
ctrl_reg = rd32(E1000_CTRL);
/* force 1000, set loopback */
hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, 0x4140);
igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
/* Now set up the MAC to the same speed/duplex as the PHY. */
ctrl_reg = rd32(E1000_CTRL);
......@@ -1496,10 +1496,10 @@ static void igb_loopback_cleanup(struct igb_adapter *adapter)
wr32(E1000_RCTL, rctl);
hw->mac.autoneg = true;
hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_reg);
igb_read_phy_reg(hw, PHY_CONTROL, &phy_reg);
if (phy_reg & MII_CR_LOOPBACK) {
phy_reg &= ~MII_CR_LOOPBACK;
hw->phy.ops.write_phy_reg(hw, PHY_CONTROL, phy_reg);
igb_write_phy_reg(hw, PHY_CONTROL, phy_reg);
igb_phy_sw_reset(hw);
}
}
......
......@@ -931,8 +931,7 @@ void igb_reset(struct igb_adapter *adapter)
wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
igb_reset_adaptive(&adapter->hw);
if (adapter->hw.phy.ops.get_phy_info)
adapter->hw.phy.ops.get_phy_info(&adapter->hw);
igb_get_phy_info(&adapter->hw);
}
/**
......@@ -1305,7 +1304,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
igb_release_hw_control(adapter);
err_eeprom:
if (!igb_check_reset_block(hw))
hw->phy.ops.reset_phy(hw);
igb_reset_phy(hw);
if (hw->flash_address)
iounmap(hw->flash_address);
......@@ -1365,9 +1364,8 @@ static void __devexit igb_remove(struct pci_dev *pdev)
unregister_netdev(netdev);
if (adapter->hw.phy.ops.reset_phy &&
!igb_check_reset_block(&adapter->hw))
adapter->hw.phy.ops.reset_phy(&adapter->hw);
if (!igb_check_reset_block(&adapter->hw))
igb_reset_phy(&adapter->hw);
igb_remove_device(&adapter->hw);
igb_reset_interrupt_capability(adapter);
......@@ -2283,8 +2281,7 @@ static void igb_set_multi(struct net_device *netdev)
static void igb_update_phy_info(unsigned long data)
{
struct igb_adapter *adapter = (struct igb_adapter *) data;
if (adapter->hw.phy.ops.get_phy_info)
adapter->hw.phy.ops.get_phy_info(&adapter->hw);
igb_get_phy_info(&adapter->hw);
}
/**
......@@ -3258,7 +3255,7 @@ void igb_update_stats(struct igb_adapter *adapter)
/* Phy Stats */
if (hw->phy.media_type == e1000_media_type_copper) {
if ((adapter->link_speed == SPEED_1000) &&
(!hw->phy.ops.read_phy_reg(hw, PHY_1000T_STATUS,
(!igb_read_phy_reg(hw, PHY_1000T_STATUS,
&phy_tmp))) {
phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
adapter->phy_stats.idle_errors += phy_tmp;
......@@ -4111,9 +4108,8 @@ static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
case SIOCGMIIREG:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (adapter->hw.phy.ops.read_phy_reg(&adapter->hw,
data->reg_num
& 0x1F, &data->val_out))
if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
&data->val_out))
return -EIO;
break;
case SIOCSMIIREG:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment