Merge branch 'further-sfp-phylink-updates'

Russell King says:

====================
further sfp/phylink updates

This series:
- cleans up printing of module information
- improves the transceiver capability decoding, getting rid of the
  guessing by connector type, improves direct-attach cable support
  and adds support for 1G Base-PX and Base-BX10 modules.
- cleans up phylink_sfp_module_insert()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/phylink.c

@@ -1578,7 +1578,7 @@ static int phylink_sfp_module_insert(void *upstream,
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
 	struct phylink_link_state config;
 	phy_interface_t iface;
-	int mode, ret = 0;
+	int ret = 0;
 	bool changed;
 	u8 port;
 
@@ -1593,7 +1593,6 @@ static int phylink_sfp_module_insert(void *upstream,
 	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_2500BASEX:
 	case PHY_INTERFACE_MODE_10GKR:
-		mode = MLO_AN_INBAND;
 		break;
 	default:
 		return -EINVAL;
@@ -1611,13 +1610,15 @@ static int phylink_sfp_module_insert(void *upstream,
 	ret = phylink_validate(pl, support, &config);
 	if (ret) {
 		netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n",
-			   phylink_an_mode_str(mode), phy_modes(config.interface),
+			   phylink_an_mode_str(MLO_AN_INBAND),
+			   phy_modes(config.interface),
 			   __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
 		return ret;
 	}
 
 	netdev_dbg(pl->netdev, "requesting link mode %s/%s with support %*pb\n",
-		   phylink_an_mode_str(mode), phy_modes(config.interface),
+		   phylink_an_mode_str(MLO_AN_INBAND),
+		   phy_modes(config.interface),
 		   __ETHTOOL_LINK_MODE_MASK_NBITS, support);
 
 	if (phy_interface_mode_is_8023z(iface) && pl->phydev)
@@ -1630,15 +1631,15 @@ static int phylink_sfp_module_insert(void *upstream,
 		linkmode_copy(pl->link_config.advertising, config.advertising);
 	}
 
-	if (pl->link_an_mode != mode ||
+	if (pl->link_an_mode != MLO_AN_INBAND ||
 	    pl->link_config.interface != config.interface) {
 		pl->link_config.interface = config.interface;
-		pl->link_an_mode = mode;
+		pl->link_an_mode = MLO_AN_INBAND;
 
 		changed = true;
 
 		netdev_info(pl->netdev, "switched to %s/%s link mode\n",
-			    phylink_an_mode_str(mode),
+			    phylink_an_mode_str(MLO_AN_INBAND),
 			    phy_modes(config.interface));
 	}
 

drivers/net/phy/sfp-bus.c

@@ -57,21 +57,19 @@ int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 	case SFP_CONNECTOR_MT_RJ:
 	case SFP_CONNECTOR_MU:
 	case SFP_CONNECTOR_OPTICAL_PIGTAIL:
-		if (support)
-			phylink_set(support, FIBRE);
 		port = PORT_FIBRE;
 		break;
 
 	case SFP_CONNECTOR_RJ45:
-		if (support)
-			phylink_set(support, TP);
 		port = PORT_TP;
 		break;
 
+	case SFP_CONNECTOR_COPPER_PIGTAIL:
+		port = PORT_DA;
+		break;
+
 	case SFP_CONNECTOR_UNSPEC:
 		if (id->base.e1000_base_t) {
-			if (support)
-				phylink_set(support, TP);
 			port = PORT_TP;
 			break;
 		}
@@ -80,7 +78,6 @@ int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 	case SFP_CONNECTOR_MPO_1X12:
 	case SFP_CONNECTOR_MPO_2X16:
 	case SFP_CONNECTOR_HSSDC_II:
-	case SFP_CONNECTOR_COPPER_PIGTAIL:
 	case SFP_CONNECTOR_NOSEPARATE:
 	case SFP_CONNECTOR_MXC_2X16:
 		port = PORT_OTHER;
@@ -92,6 +89,18 @@ int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 		break;
 	}
 
+	if (support) {
+		switch (port) {
+		case PORT_FIBRE:
+			phylink_set(support, FIBRE);
+			break;
+
+		case PORT_TP:
+			phylink_set(support, TP);
+			break;
+		}
+	}
+
 	return port;
 }
 EXPORT_SYMBOL_GPL(sfp_parse_port);
@@ -143,6 +152,11 @@ phy_interface_t sfp_parse_interface(struct sfp_bus *bus,
 		break;
 
 	default:
+		if (id->base.e1000_base_cx) {
+			iface = PHY_INTERFACE_MODE_1000BASEX;
+			break;
+		}
+
 		iface = PHY_INTERFACE_MODE_NA;
 		dev_err(bus->sfp_dev,
 			"SFP module encoding does not support 8b10b nor 64b66b\n");
@@ -165,10 +179,26 @@ EXPORT_SYMBOL_GPL(sfp_parse_interface);
 void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 		       unsigned long *support)
 {
+	unsigned int br_min, br_nom, br_max;
+
 	phylink_set(support, Autoneg);
 	phylink_set(support, Pause);
 	phylink_set(support, Asym_Pause);
 
+	/* Decode the bitrate information to MBd */
+	br_min = br_nom = br_max = 0;
+	if (id->base.br_nominal) {
+		if (id->base.br_nominal != 255) {
+			br_nom = id->base.br_nominal * 100;
+			br_min = br_nom + id->base.br_nominal * id->ext.br_min;
+			br_max = br_nom + id->base.br_nominal * id->ext.br_max;
+		} else if (id->ext.br_max) {
+			br_nom = 250 * id->ext.br_max;
+			br_max = br_nom + br_nom * id->ext.br_min / 100;
+			br_min = br_nom - br_nom * id->ext.br_min / 100;
+		}
+	}
+
 	/* Set ethtool support from the compliance fields. */
 	if (id->base.e10g_base_sr)
 		phylink_set(support, 10000baseSR_Full);
@@ -187,6 +217,34 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 		phylink_set(support, 1000baseT_Full);
 	}
 
+	/* 1000Base-PX or 1000Base-BX10 */
+	if ((id->base.e_base_px || id->base.e_base_bx10) &&
+	    br_min <= 1300 && br_max >= 1200)
+		phylink_set(support, 1000baseX_Full);
+
+	/* For active or passive cables, select the link modes
+	 * based on the bit rates and the cable compliance bytes.
+	 */
+	if ((id->base.sfp_ct_passive || id->base.sfp_ct_active) && br_nom) {
+		/* This may look odd, but some manufacturers use 12000MBd */
+		if (br_min <= 12000 && br_max >= 10300)
+			phylink_set(support, 10000baseCR_Full);
+		if (br_min <= 3200 && br_max >= 3100)
+			phylink_set(support, 2500baseX_Full);
+		if (br_min <= 1300 && br_max >= 1200)
+			phylink_set(support, 1000baseX_Full);
+	}
+	if (id->base.sfp_ct_passive) {
+		if (id->base.passive.sff8431_app_e)
+			phylink_set(support, 10000baseCR_Full);
+	}
+	if (id->base.sfp_ct_active) {
+		if (id->base.active.sff8431_app_e ||
+		    id->base.active.sff8431_lim) {
+			phylink_set(support, 10000baseCR_Full);
+		}
+	}
+
 	switch (id->base.extended_cc) {
 	case 0x00: /* Unspecified */
 		break;
@@ -220,35 +278,6 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 		if (id->base.br_nominal >= 12)
 			phylink_set(support, 1000baseX_Full);
 	}
-
-	switch (id->base.connector) {
-	case SFP_CONNECTOR_SC:
-	case SFP_CONNECTOR_FIBERJACK:
-	case SFP_CONNECTOR_LC:
-	case SFP_CONNECTOR_MT_RJ:
-	case SFP_CONNECTOR_MU:
-	case SFP_CONNECTOR_OPTICAL_PIGTAIL:
-		break;
-
-	case SFP_CONNECTOR_UNSPEC:
-		if (id->base.e1000_base_t)
-			break;
-
-	case SFP_CONNECTOR_SG: /* guess */
-	case SFP_CONNECTOR_MPO_1X12:
-	case SFP_CONNECTOR_MPO_2X16:
-	case SFP_CONNECTOR_HSSDC_II:
-	case SFP_CONNECTOR_COPPER_PIGTAIL:
-	case SFP_CONNECTOR_NOSEPARATE:
-	case SFP_CONNECTOR_MXC_2X16:
-	default:
-		/* a guess at the supported link modes */
-		dev_warn(bus->sfp_dev,
-			 "Guessing link modes, please report...\n");
-		phylink_set(support, 1000baseT_Half);
-		phylink_set(support, 1000baseT_Full);
-		break;
-	}
 }
 EXPORT_SYMBOL_GPL(sfp_parse_support);
 

drivers/net/phy/sfp.c

@@ -466,11 +466,6 @@ static int sfp_sm_mod_probe(struct sfp *sfp)
 {
 	/* SFP module inserted - read I2C data */
 	struct sfp_eeprom_id id;
-	char vendor[17];
-	char part[17];
-	char sn[17];
-	char date[9];
-	char rev[5];
 	u8 check;
 	int err;
 
@@ -506,19 +501,12 @@ static int sfp_sm_mod_probe(struct sfp *sfp)
 
 	sfp->id = id;
 
-	memcpy(vendor, sfp->id.base.vendor_name, 16);
-	vendor[16] = '\0';
-	memcpy(part, sfp->id.base.vendor_pn, 16);
-	part[16] = '\0';
-	memcpy(rev, sfp->id.base.vendor_rev, 4);
-	rev[4] = '\0';
-	memcpy(sn, sfp->id.ext.vendor_sn, 16);
-	sn[16] = '\0';
-	memcpy(date, sfp->id.ext.datecode, 8);
-	date[8] = '\0';
-
-	dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n",
-		 vendor, part, rev, sn, date);
+	dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %.*s\n",
+		 (int)sizeof(id.base.vendor_name), id.base.vendor_name,
+		 (int)sizeof(id.base.vendor_pn), id.base.vendor_pn,
+		 (int)sizeof(id.base.vendor_rev), id.base.vendor_rev,
+		 (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn,
+		 (int)sizeof(id.ext.datecode), id.ext.datecode);
 
 	/* Check whether we support this module */
 	if (!sfp->type->module_supported(&sfp->id)) {

include/linux/sfp.h

@@ -165,7 +165,41 @@ struct sfp_eeprom_base {
 	char vendor_rev[4];
 	union {
 		__be16 optical_wavelength;
-		u8 cable_spec;
+		__be16 cable_compliance;
+		struct {
+#if defined __BIG_ENDIAN_BITFIELD
+			u8 reserved60_2:6;
+			u8 fc_pi_4_app_h:1;
+			u8 sff8431_app_e:1;
+			u8 reserved61:8;
+#elif defined __LITTLE_ENDIAN_BITFIELD
+			u8 sff8431_app_e:1;
+			u8 fc_pi_4_app_h:1;
+			u8 reserved60_2:6;
+			u8 reserved61:8;
+#else
+#error Unknown Endian
+#endif
+		} __packed passive;
+		struct {
+#if defined __BIG_ENDIAN_BITFIELD
+			u8 reserved60_4:4;
+			u8 fc_pi_4_lim:1;
+			u8 sff8431_lim:1;
+			u8 fc_pi_4_app_h:1;
+			u8 sff8431_app_e:1;
+			u8 reserved61:8;
+#elif defined __LITTLE_ENDIAN_BITFIELD
+			u8 sff8431_app_e:1;
+			u8 fc_pi_4_app_h:1;
+			u8 sff8431_lim:1;
+			u8 fc_pi_4_lim:1;
+			u8 reserved60_4:4;
+			u8 reserved61:8;
+#else
+#error Unknown Endian
+#endif
+		} __packed active;
 	} __packed;
 	u8 reserved62;
 	u8 cc_base;