clk: tegra: Use fence_udelay() during PLLU init

This patch uses fence_udelay rather than udelay during PLLU
initialization to ensure writes to clock registers happens before
waiting for specified delay.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drivers/clk/tegra/clk-tegra210.c

@@ -2842,7 +2842,7 @@ static int tegra210_enable_pllu(void)
 	reg = readl_relaxed(clk_base + pllu.params->ext_misc_reg[0]);
 	reg &= ~BIT(pllu.params->iddq_bit_idx);
 	writel_relaxed(reg, clk_base + pllu.params->ext_misc_reg[0]);
-	udelay(5);
+	fence_udelay(5, clk_base);
 
 	reg = readl_relaxed(clk_base + PLLU_BASE);
 	reg &= ~GENMASK(20, 0);
@@ -2850,7 +2850,7 @@ static int tegra210_enable_pllu(void)
 	reg |= fentry->n << 8;
 	reg |= fentry->p << 16;
 	writel(reg, clk_base + PLLU_BASE);
-	udelay(1);
+	fence_udelay(1, clk_base);
 	reg |= PLL_ENABLE;
 	writel(reg, clk_base + PLLU_BASE);
 
@@ -2896,12 +2896,12 @@ static int tegra210_init_pllu(void)
 		reg = readl_relaxed(clk_base + XUSB_PLL_CFG0);
 		reg &= ~XUSB_PLL_CFG0_PLLU_LOCK_DLY_MASK;
 		writel_relaxed(reg, clk_base + XUSB_PLL_CFG0);
-		udelay(1);
+		fence_udelay(1, clk_base);
 
 		reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0);
 		reg |= PLLU_HW_PWRDN_CFG0_SEQ_ENABLE;
 		writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0);
-		udelay(1);
+		fence_udelay(1, clk_base);
 
 		reg = readl_relaxed(clk_base + PLLU_BASE);
 		reg &= ~PLLU_BASE_CLKENABLE_USB;