hwmon: (emc2103) Clamp limits instead of bailing out

It is customary to clamp limits instead of bailing out with an error
if a configured limit is out of the range supported by the driver.
This simplifies limit configuration, since the user will not typically
know chip and/or driver specific limits.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

drivers/hwmon/emc2103.c

@@ -250,9 +250,7 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *da,
 	if (result < 0)
 		return result;
 
-	val = DIV_ROUND_CLOSEST(val, 1000);
-	if ((val < -63) || (val > 127))
-		return -EINVAL;
+	val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127);
 
 	mutex_lock(&data->update_lock);
 	data->temp_min[nr] = val;
@@ -274,9 +272,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *da,
 	if (result < 0)
 		return result;
 
-	val = DIV_ROUND_CLOSEST(val, 1000);
-	if ((val < -63) || (val > 127))
-		return -EINVAL;
+	val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -63, 127);
 
 	mutex_lock(&data->update_lock);
 	data->temp_max[nr] = val;
@@ -390,15 +386,14 @@ static ssize_t set_fan_target(struct device *dev, struct device_attribute *da,
 {
 	struct emc2103_data *data = emc2103_update_device(dev);
 	struct i2c_client *client = to_i2c_client(dev);
-	long rpm_target;
+	unsigned long rpm_target;
 
-	int result = kstrtol(buf, 10, &rpm_target);
+	int result = kstrtoul(buf, 10, &rpm_target);
 	if (result < 0)
 		return result;
 
 	/* Datasheet states 16384 as maximum RPM target (table 3.2) */
-	if ((rpm_target < 0) || (rpm_target > 16384))
-		return -EINVAL;
+	rpm_target = clamp_val(rpm_target, 0, 16384);
 
 	mutex_lock(&data->update_lock);