Commit f825e40b authored by Finn Thain's avatar Finn Thain Committed by Martin K. Petersen

ncr5380: Remove PSEUDO_DMA macro

For those wrapper drivers which only implement Programmed IO, have
NCR5380_dma_xfer_len() evaluate to zero. That allows PDMA to be easily
disabled at run-time and so the PSEUDO_DMA macro is no longer needed.

Also remove the spin counters used for debugging pseudo DMA drivers.
Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
Tested-by: default avatarMichael Schmitz <schmitzmic@gmail.com>
Tested-by: default avatarOndrej Zary <linux@rainbow-software.org>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 1bb46002
......@@ -468,35 +468,10 @@ static void prepare_info(struct Scsi_Host *instance)
#endif
#ifdef PARITY
"PARITY "
#endif
#ifdef PSEUDO_DMA
"PSEUDO_DMA "
#endif
"");
}
#ifdef PSEUDO_DMA
static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
char *buffer, int length)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
hostdata->spin_max_r = 0;
hostdata->spin_max_w = 0;
return 0;
}
static int __maybe_unused NCR5380_show_info(struct seq_file *m,
struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
hostdata->spin_max_w, hostdata->spin_max_r);
return 0;
}
#endif
/**
* NCR5380_init - initialise an NCR5380
* @instance: adapter to configure
......@@ -1436,7 +1411,6 @@ static int do_abort(struct Scsi_Host *instance)
return -1;
}
#if defined(PSEUDO_DMA)
/*
* Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
* unsigned char *phase, int *count, unsigned char **data)
......@@ -1592,7 +1566,6 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
return foo;
}
#endif /* PSEUDO_DMA */
/*
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
......@@ -1683,7 +1656,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
* in an unconditional loop.
*/
#if defined(PSEUDO_DMA)
transfersize = 0;
if (!cmd->device->borken)
transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
......@@ -1706,9 +1678,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
/* XXX - need to source or sink data here, as appropriate */
} else
cmd->SCp.this_residual -= transfersize - len;
} else
#endif /* PSEUDO_DMA */
{
} else {
/* Break up transfer into 3 ms chunks,
* presuming 6 accesses per handshake.
*/
......
......@@ -256,10 +256,6 @@ struct NCR5380_hostdata {
struct work_struct main_task;
#ifdef SUPPORT_TAGS
struct tag_alloc TagAlloc[8][8]; /* 8 targets and 8 LUNs */
#endif
#ifdef PSEUDO_DMA
unsigned spin_max_r;
unsigned spin_max_w;
#endif
struct workqueue_struct *work_q;
unsigned long accesses_per_ms; /* chip register accesses per ms */
......
......@@ -13,8 +13,6 @@
#include <scsi/scsi_host.h>
#define PSEUDO_DMA
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_read(reg) cumanascsi_read(instance, reg)
#define NCR5380_write(reg, value) cumanascsi_write(instance, reg, value)
......
......@@ -14,7 +14,6 @@
#include <scsi/scsi_host.h>
/*#define PSEUDO_DMA*/
#define DONT_USE_INTR
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
......@@ -24,7 +23,7 @@
#define NCR5380_write(reg, value) \
writeb(value, priv(instance)->base + ((reg) << 2))
#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
#define NCR5380_dma_xfer_len(instance, cmd, phase) (0)
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_info oakscsi_info
......
......@@ -39,6 +39,10 @@
#define NCR5380_read(reg) inb(instance->io_port + reg)
#define NCR5380_write(reg, value) outb(value, instance->io_port + reg)
#define NCR5380_dma_xfer_len(instance, cmd, phase) (0)
#define NCR5380_pread(instance, dst, len) (0)
#define NCR5380_pwrite(instance, src, len) (0)
#define NCR5380_implementation_fields /* none */
#include "NCR5380.h"
......
#define PSEUDO_DMA
#define DONT_USE_INTR
/*
......@@ -352,8 +351,6 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
while (!(NCR5380_read(DTC_CONTROL_REG) & D_CR_ACCESS))
++i;
rtrc(0);
if (i > hostdata->spin_max_r)
hostdata->spin_max_r = i;
return (0);
}
......@@ -400,8 +397,6 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
rtrc(7);
/* Check for parity error here. fixme. */
rtrc(0);
if (i > hostdata->spin_max_w)
hostdata->spin_max_w = i;
return (0);
}
......@@ -440,8 +435,6 @@ static struct scsi_host_template driver_template = {
.detect = dtc_detect,
.release = dtc_release,
.proc_name = "dtc3x80",
.show_info = dtc_show_info,
.write_info = dtc_write_info,
.info = dtc_info,
.queuecommand = dtc_queue_command,
.eh_abort_handler = dtc_abort,
......
......@@ -27,8 +27,6 @@
#define NCR5380_abort dtc_abort
#define NCR5380_bus_reset dtc_bus_reset
#define NCR5380_info dtc_info
#define NCR5380_show_info dtc_show_info
#define NCR5380_write_info dtc_write_info
/* 15 12 11 10
1001 1100 0000 0000 */
......
......@@ -57,7 +57,6 @@
*/
#define AUTOPROBE_IRQ
#define PSEUDO_DMA
#include <asm/io.h>
#include <linux/blkdev.h>
......
......@@ -70,7 +70,6 @@
#define NCR5380_pread generic_NCR5380_pread
#define NCR5380_pwrite generic_NCR5380_pwrite
#define NCR5380_info generic_NCR5380_info
#define NCR5380_show_info generic_NCR5380_show_info
#define BOARD_NCR5380 0
#define BOARD_NCR53C400 1
......
......@@ -28,8 +28,6 @@
/* Definitions for the core NCR5380 driver. */
#define PSEUDO_DMA
#define NCR5380_implementation_fields unsigned char *pdma_base
#define NCR5380_read(reg) macscsi_read(instance, reg)
......@@ -46,8 +44,6 @@
#define NCR5380_abort macscsi_abort
#define NCR5380_bus_reset macscsi_bus_reset
#define NCR5380_info macscsi_info
#define NCR5380_show_info macscsi_show_info
#define NCR5380_write_info macscsi_write_info
#include "NCR5380.h"
......@@ -111,7 +107,6 @@ static int __init mac_scsi_setup(char *str)
__setup("mac5380=", mac_scsi_setup);
#endif /* !MODULE */
#ifdef PSEUDO_DMA
/*
Pseudo-DMA: (Ove Edlund)
The code attempts to catch bus errors that occur if one for example
......@@ -303,7 +298,6 @@ static int macscsi_pwrite(struct Scsi_Host *instance,
return 0;
}
#endif
static int macscsi_dma_xfer_len(struct Scsi_Host *instance,
struct scsi_cmnd *cmd)
......@@ -324,8 +318,6 @@ static int macscsi_dma_xfer_len(struct Scsi_Host *instance,
static struct scsi_host_template mac_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
.show_info = macscsi_show_info,
.write_info = macscsi_write_info,
.name = "Macintosh NCR5380 SCSI",
.info = macscsi_info,
.queuecommand = macscsi_queue_command,
......@@ -351,9 +343,7 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
if (!pio_mem)
return -ENODEV;
#ifdef PSEUDO_DMA
pdma_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
#endif
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
......
#define PSEUDO_DMA
/*
* This driver adapted from Drew Eckhardt's Trantor T128 driver
*
......@@ -479,7 +477,6 @@ static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst,
P_DATA_REG_OFFSET);
register int i = len;
int ii = 0;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
while ( !(inb(instance->io_port + P_STATUS_REG_OFFSET) & P_ST_RDY) )
++ii;
......@@ -492,8 +489,6 @@ static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst,
instance->host_no);
return -1;
}
if (ii > hostdata->spin_max_r)
hostdata->spin_max_r = ii;
return 0;
}
......@@ -516,7 +511,6 @@ static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src
register unsigned short reg = (instance->io_port + P_DATA_REG_OFFSET);
register int i = len;
int ii = 0;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
while ( !((inb(instance->io_port + P_STATUS_REG_OFFSET)) & P_ST_RDY) )
++ii;
......@@ -529,8 +523,6 @@ static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src
instance->host_no);
return -1;
}
if (ii > hostdata->spin_max_w)
hostdata->spin_max_w = ii;
return 0;
}
......@@ -550,8 +542,6 @@ static struct scsi_host_template driver_template = {
.detect = pas16_detect,
.release = pas16_release,
.proc_name = "pas16",
.show_info = pas16_show_info,
.write_info = pas16_write_info,
.info = pas16_info,
.queuecommand = pas16_queue_command,
.eh_abort_handler = pas16_abort,
......
......@@ -109,8 +109,6 @@
#define NCR5380_abort pas16_abort
#define NCR5380_bus_reset pas16_bus_reset
#define NCR5380_info pas16_info
#define NCR5380_show_info pas16_show_info
#define NCR5380_write_info pas16_write_info
/* 15 14 12 10 7 5 3
1101 0100 1010 1000 */
......
#define PSEUDO_DMA
/*
* Trantor T128/T128F/T228 driver
* Note : architecturally, the T100 and T130 are different and won't
......@@ -394,8 +392,6 @@ static struct scsi_host_template driver_template = {
.detect = t128_detect,
.release = t128_release,
.proc_name = "t128",
.show_info = t128_show_info,
.write_info = t128_write_info,
.info = t128_info,
.queuecommand = t128_queue_command,
.eh_abort_handler = t128_abort,
......
......@@ -83,8 +83,6 @@
#define NCR5380_abort t128_abort
#define NCR5380_bus_reset t128_bus_reset
#define NCR5380_info t128_info
#define NCR5380_show_info t128_show_info
#define NCR5380_write_info t128_write_info
/* 15 14 12 10 7 5 3
1101 0100 1010 1000 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment