Commit f8422440 authored by Oleksij Rempel's avatar Oleksij Rempel Committed by John W. Linville

ath9k_htc: use ath9k_cmn_beacon_config_sta

Signed-off-by: default avatarOleksij Rempel <linux@rempel-privat.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent cbbdf2ae
......@@ -62,97 +62,17 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
}
}
static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
struct ath_beacon_config *bss_conf)
{
struct ath_common *common = ath9k_hw_common(priv->ah);
struct ath9k_beacon_state bs;
enum ath9k_int imask = 0;
int dtimperiod, dtimcount;
int bmiss_timeout;
u32 nexttbtt = 0, intval, tsftu;
__be32 htc_imask = 0;
u64 tsf;
int num_beacons, offset, dtim_dec_count;
int ret __attribute__ ((unused));
u8 cmd_rsp;
memset(&bs, 0, sizeof(bs));
intval = bss_conf->beacon_interval;
bmiss_timeout = (ATH_DEFAULT_BMISS_LIMIT * bss_conf->beacon_interval);
/*
* Setup dtim parameters according to
* last beacon we received (which may be none).
*/
dtimperiod = bss_conf->dtim_period;
if (dtimperiod <= 0) /* NB: 0 if not known */
dtimperiod = 1;
dtimcount = 1;
if (dtimcount >= dtimperiod) /* NB: sanity check */
dtimcount = 0;
/*
* Pull nexttbtt forward to reflect the current
* TSF and calculate dtim state for the result.
*/
tsf = ath9k_hw_gettsf64(priv->ah);
tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
num_beacons = tsftu / intval + 1;
offset = tsftu % intval;
nexttbtt = tsftu - offset;
if (offset)
nexttbtt += intval;
/* DTIM Beacon every dtimperiod Beacon */
dtim_dec_count = num_beacons % dtimperiod;
dtimcount -= dtim_dec_count;
if (dtimcount < 0)
dtimcount += dtimperiod;
bs.bs_intval = TU_TO_USEC(intval);
bs.bs_nexttbtt = TU_TO_USEC(nexttbtt);
bs.bs_dtimperiod = dtimperiod * bs.bs_intval;
bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount * bs.bs_intval;
/*
* Calculate the number of consecutive beacons to miss* before taking
* a BMISS interrupt. The configuration is specified in TU so we only
* need calculate based on the beacon interval. Note that we clamp the
* result to at most 15 beacons.
*/
bs.bs_bmissthreshold = DIV_ROUND_UP(bmiss_timeout, intval);
if (bs.bs_bmissthreshold > 15)
bs.bs_bmissthreshold = 15;
else if (bs.bs_bmissthreshold <= 0)
bs.bs_bmissthreshold = 1;
/*
* Calculate sleep duration. The configuration is given in ms.
* We ensure a multiple of the beacon period is used. Also, if the sleep
* duration is greater than the DTIM period then it makes senses
* to make it a multiple of that.
*
* XXX fixed at 100ms
*/
bs.bs_sleepduration = TU_TO_USEC(roundup(IEEE80211_MS_TO_TU(100),
intval));
if (bs.bs_sleepduration > bs.bs_dtimperiod)
bs.bs_sleepduration = bs.bs_dtimperiod;
/* TSF out of range threshold fixed at 1 second */
bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
ath_dbg(common, CONFIG, "intval: %u tsf: %llu tsftu: %u\n",
intval, tsf, tsftu);
ath_dbg(common, CONFIG, "bmiss: %u sleep: %u\n",
bs.bs_bmissthreshold, bs.bs_sleepduration);
/* Set the computed STA beacon timers */
if (ath9k_cmn_beacon_config_sta(priv->ah, bss_conf, &bs) == -EPERM)
return;
WMI_CMD(WMI_DISABLE_INTR_CMDID);
ath9k_hw_set_sta_beacon_timers(priv->ah, &bs);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment