x86/entry: Remove debug IDT frobbing

This is all unused now.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.245019500@infradead.org

arch/x86/include/asm/debugreg.h

@@ -94,25 +94,6 @@ extern void aout_dump_debugregs(struct user *dump);
 
 extern void hw_breakpoint_restore(void);
 
-#ifdef CONFIG_X86_64
-DECLARE_PER_CPU(int, debug_stack_usage);
-static inline void debug_stack_usage_inc(void)
-{
-	__this_cpu_inc(debug_stack_usage);
-}
-static inline void debug_stack_usage_dec(void)
-{
-	__this_cpu_dec(debug_stack_usage);
-}
-void debug_stack_set_zero(void);
-void debug_stack_reset(void);
-#else /* !X86_64 */
-static inline void debug_stack_set_zero(void) { }
-static inline void debug_stack_reset(void) { }
-static inline void debug_stack_usage_inc(void) { }
-static inline void debug_stack_usage_dec(void) { }
-#endif /* X86_64 */
-
 static __always_inline unsigned long local_db_save(void)
 {
 	unsigned long dr7;

arch/x86/include/asm/desc.h

@@ -42,8 +42,6 @@ static inline void fill_ldt(struct desc_struct *desc, const struct user_desc *in
 
 extern struct desc_ptr idt_descr;
 extern gate_desc idt_table[];
-extern const struct desc_ptr debug_idt_descr;
-extern gate_desc debug_idt_table[];
 
 struct gdt_page {
 	struct desc_struct gdt[GDT_ENTRIES];
@@ -390,31 +388,6 @@ void alloc_intr_gate(unsigned int n, const void *addr);
 
 extern unsigned long system_vectors[];
 
-#ifdef CONFIG_X86_64
-DECLARE_PER_CPU(u32, debug_idt_ctr);
-static __always_inline bool is_debug_idt_enabled(void)
-{
-	if (this_cpu_read(debug_idt_ctr))
-		return true;
-
-	return false;
-}
-
-static __always_inline void load_debug_idt(void)
-{
-	load_idt((const struct desc_ptr *)&debug_idt_descr);
-}
-#else
-static inline bool is_debug_idt_enabled(void)
-{
-	return false;
-}
-
-static inline void load_debug_idt(void)
-{
-}
-#endif
-
 /*
  * The load_current_idt() must be called with interrupts disabled
  * to avoid races. That way the IDT will always be set back to the expected
@@ -424,10 +397,7 @@ static inline void load_debug_idt(void)
  */
 static __always_inline void load_current_idt(void)
 {
-	if (is_debug_idt_enabled())
-		load_debug_idt();
-	else
-		load_idt((const struct desc_ptr *)&idt_descr);
+	load_idt((const struct desc_ptr *)&idt_descr);
 }
 
 extern void idt_setup_early_handler(void);
@@ -438,11 +408,9 @@ extern void idt_setup_apic_and_irq_gates(void);
 #ifdef CONFIG_X86_64
 extern void idt_setup_early_pf(void);
 extern void idt_setup_ist_traps(void);
-extern void idt_setup_debugidt_traps(void);
 #else
 static inline void idt_setup_early_pf(void) { }
 static inline void idt_setup_ist_traps(void) { }
-static inline void idt_setup_debugidt_traps(void) { }
 #endif
 
 extern void idt_invalidate(void *addr);

arch/x86/kernel/cpu/common.c

@@ -1706,23 +1706,6 @@ void syscall_init(void)
 	       X86_EFLAGS_IOPL|X86_EFLAGS_AC|X86_EFLAGS_NT);
 }
 
-DEFINE_PER_CPU(int, debug_stack_usage);
-DEFINE_PER_CPU(u32, debug_idt_ctr);
-
-noinstr void debug_stack_set_zero(void)
-{
-	this_cpu_inc(debug_idt_ctr);
-	load_current_idt();
-}
-
-noinstr void debug_stack_reset(void)
-{
-	if (WARN_ON(!this_cpu_read(debug_idt_ctr)))
-		return;
-	if (this_cpu_dec_return(debug_idt_ctr) == 0)
-		load_current_idt();
-}
-
 #else	/* CONFIG_X86_64 */
 
 DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;

arch/x86/kernel/idt.c

@@ -158,14 +158,6 @@ static const __initconst struct idt_data apic_idts[] = {
 static const __initconst struct idt_data early_pf_idts[] = {
 	INTG(X86_TRAP_PF,		asm_exc_page_fault),
 };
-
-/*
- * Override for the debug_idt. Same as the default, but with interrupt
- * stack set to DEFAULT_STACK (0). Required for NMI trap handling.
- */
-static const __initconst struct idt_data dbg_idts[] = {
-	INTG(X86_TRAP_DB,		asm_exc_debug),
-};
 #endif
 
 /* Must be page-aligned because the real IDT is used in a fixmap. */
@@ -177,9 +169,6 @@ struct desc_ptr idt_descr __ro_after_init = {
 };
 
 #ifdef CONFIG_X86_64
-/* No need to be aligned, but done to keep all IDTs defined the same way. */
-gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss;
-
 /*
  * The exceptions which use Interrupt stacks. They are setup after
  * cpu_init() when the TSS has been initialized.
@@ -192,15 +181,6 @@ static const __initconst struct idt_data ist_idts[] = {
 	ISTG(X86_TRAP_MC,	asm_exc_machine_check,	IST_INDEX_MCE),
 #endif
 };
-
-/*
- * Override for the debug_idt. Same as the default, but with interrupt
- * stack set to DEFAULT_STACK (0). Required for NMI trap handling.
- */
-const struct desc_ptr debug_idt_descr = {
-	.size		= IDT_ENTRIES * 16 - 1,
-	.address	= (unsigned long) debug_idt_table,
-};
 #endif
 
 static inline void idt_init_desc(gate_desc *gate, const struct idt_data *d)
@@ -292,16 +272,6 @@ void __init idt_setup_ist_traps(void)
 {
 	idt_setup_from_table(idt_table, ist_idts, ARRAY_SIZE(ist_idts), true);
 }
-
-/**
- * idt_setup_debugidt_traps - Initialize the debug idt table with debug traps
- */
-void __init idt_setup_debugidt_traps(void)
-{
-	memcpy(&debug_idt_table, &idt_table, IDT_ENTRIES * 16);
-
-	idt_setup_from_table(debug_idt_table, dbg_idts, ARRAY_SIZE(dbg_idts), false);
-}
 #endif
 
 /**

arch/x86/kernel/traps.c

@@ -798,12 +798,6 @@ static void noinstr handle_debug(struct pt_regs *regs, unsigned long dr6,
 		return;
 	}
 
-	/*
-	 * Let others (NMI) know that the debug stack is in use
-	 * as we may switch to the interrupt stack.
-	 */
-	debug_stack_usage_inc();
-
 	/* It's safe to allow irq's after DR6 has been saved */
 	cond_local_irq_enable(regs);
 
@@ -831,7 +825,6 @@ static void noinstr handle_debug(struct pt_regs *regs, unsigned long dr6,
 
 out:
 	cond_local_irq_disable(regs);
-	debug_stack_usage_dec();
 	instrumentation_end();
 }
 
@@ -1077,6 +1070,4 @@ void __init trap_init(void)
 	cpu_init();
 
 	idt_setup_ist_traps();
-
-	idt_setup_debugidt_traps();
 }