ARM: OMAP2xxx: hwmod: Add DMA support for SHAM module

The current OMAP2 SHAM support doesn't enable DMA
so add that support so it can use DMA just like OMAP3.

CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
[paul@pwsan.com: fixed lines causing sparse warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c

@@ -405,5 +405,5 @@ struct omap_hwmod_ocp_if omap2xxx_l4_core__sham = {
 	.slave		= &omap2xxx_sham_hwmod,
 	.clk		= "sha_ick",
 	.addr		= omap2xxx_sham_addrs,
-	.user		= OCP_USER_MPU,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };

arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

@@ -886,9 +886,15 @@ static struct omap_hwmod_irq_info omap2_sham_mpu_irqs[] = {
 	{ .irq = -1 }
 };
 
+static struct omap_hwmod_dma_info omap2_sham_sdma_chs[] = {
+	{ .name = "rx", .dma_req = 13 },
+	{ .dma_req = -1 }
+};
+
 struct omap_hwmod omap2xxx_sham_hwmod = {
 	.name		= "sham",
 	.mpu_irqs	= omap2_sham_mpu_irqs,
+	.sdma_reqs	= omap2_sham_sdma_chs,
 	.main_clk	= "l4_ck",
 	.prcm		= {
 		.omap2 = {