Merge tag 'samsung-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DeviceTree updates and improvements for v4.6:
1. Add SROM controller device nodes.
2. Add Ethernet chip as child of SROM controller on SMDK5410.
3. Allow simultaneous usage exynos-rng and s5p-sss drivers on Exynos5.
4. Cleanup CPU configuration on Exynos542x/5800.
5. Add necessary nodes for cpufreq-dt driver on Exynos542x/5800 (OPPs,
   regulator supplies) which allows frequency and voltage scalling
   of this SoC.
6. Minor cleanups.

* tag 'samsung-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: Replace legacy *,wakeup property with wakeup-source for exynos boards
  ARM: dts: Add GSCL block parent clock management to pm domain on exynos542x
  ARM: dts: Extend existing CPU OPP for exynos5800
  ARM: dts: Add CPU OPP properties for exynos542x/5800
  ARM: dts: Add cluster regulator supply properties for exynos542x/5800
  ARM: dts: Make CPU configuration more readable on exynos542x/5800
  ARM: dts: Replace legacy *,wakeup property with wakeup-source on s5pv210
  ARM: dts: Allow simultaneous usage exynos-rng and s5p-sss drivers on exynos5
  ARM: dts: Add Ethernet chip to exynos5410-smdk5410
  ARM: dts: Add SROM to exynos5410
  ARM: dts: Add SROM device node for exynos5
  ARM: dts: Add SROM device node for exynos4
  ARM: dts: Add pinctrl support to exynos5410
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/exynos3250-monk.dts

@@ -43,7 +43,7 @@ power_key {
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -67,7 +67,7 @@ max77836: subpmic@25 {
 			interrupt-parent = <&gpx1>;
 			interrupts = <5 0>;
 			reg = <0x25>;
-			wakeup;
+			wakeup-source;
 
 			muic: max77836-muic {
 				compatible = "maxim,max77836-muic";
@@ -185,7 +185,7 @@ s2mps14_pmic@66 {
 		interrupt-parent = <&gpx0>;
 		interrupts = <7 0>;
 		reg = <0x66>;
-		wakeup;
+		wakeup-source;
 
 		s2mps14_osc: clocks {
 			compatible = "samsung,s2mps14-clk";

arch/arm/boot/dts/exynos3250-rinato.dts

@@ -43,7 +43,7 @@ power_key {
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -58,7 +58,7 @@ max77836: subpmic@25 {
 			interrupt-parent = <&gpx1>;
 			interrupts = <5 0>;
 			reg = <0x25>;
-			wakeup;
+			wakeup-source;
 
 			muic: max77836-muic {
 				compatible = "maxim,max77836-muic";
@@ -246,7 +246,7 @@ s2mps14_pmic@66 {
 		interrupt-parent = <&gpx0>;
 		interrupts = <7 0>;
 		reg = <0x66>;
-		wakeup;
+		wakeup-source;
 
 		s2mps14_osc: clocks {
 			compatible = "samsung,s2mps14-clk";

arch/arm/boot/dts/exynos4.dtsi

@@ -76,6 +76,11 @@ chipid@10000000 {
 		reg = <0x10000000 0x100>;
 	};
 
+	sromc@12570000 {
+		compatible = "samsung,exynos-srom";
+		reg = <0x12570000 0x14>;
+	};
+
 	mipi_phy: video-phy@10020710 {
 		compatible = "samsung,s5pv210-mipi-video-phy";
 		#phy-cells = <1>;

arch/arm/boot/dts/exynos4210-origen.dts

@@ -60,35 +60,35 @@ up {
 			label = "Up";
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		down {
 			label = "Down";
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back {
 			label = "Back";
 			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		home {
 			label = "Home";
 			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
 			label = "Menu";
 			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/exynos4210-smdkv310.dts

@@ -66,7 +66,7 @@ &keypad {
 	samsung,keypad-num-rows = <2>;
 	samsung,keypad-num-columns = <8>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-names = "default";
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	status = "okay";

arch/arm/boot/dts/exynos4210-trats.dts

@@ -112,7 +112,7 @@ power-key {
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		ok-key {

arch/arm/boot/dts/exynos4210-universal_c210.dts

@@ -92,7 +92,7 @@ config-key {
 			linux,code = <171>;
 			label = "config";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		camera-key {
@@ -107,7 +107,7 @@ power-key {
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		ok-key {

arch/arm/boot/dts/exynos4412-odroid-common.dtsi

@@ -35,7 +35,7 @@ power_key {
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/exynos4412-odroidx.dts

@@ -48,7 +48,7 @@ home_key {
 			linux,code = <KEY_HOME>;
 			label = "home key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/exynos4412-origen.dts

@@ -423,7 +423,7 @@ &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <2>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
 	status = "okay";

arch/arm/boot/dts/exynos4412-smdk4412.dts

@@ -45,7 +45,7 @@ &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <8>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
 	status = "okay";

arch/arm/boot/dts/exynos4412-trats2.dts

@@ -119,7 +119,7 @@ key-power {
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key-ok {
@@ -127,7 +127,7 @@ key-ok {
 			linux,code = <139>;
 			label = "ok";
 			debounce-inteval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/exynos5.dtsi

@@ -30,6 +30,11 @@ chipid@10000000 {
 		reg = <0x10000000 0x100>;
 	};
 
+	sromc@12250000 {
+		compatible = "samsung,exynos-srom";
+		reg = <0x12250000 0x14>;
+	};
+
 	combiner: interrupt-controller@10440000 {
 		compatible = "samsung,exynos4210-combiner";
 		#interrupt-cells = <2>;

arch/arm/boot/dts/exynos5250-arndale.dts

@@ -34,42 +34,42 @@ menu {
 			label = "SW-TACT2";
 			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		home {
 			label = "SW-TACT3";
 			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		up {
 			label = "SW-TACT4";
 			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		down {
 			label = "SW-TACT5";
 			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back {
 			label = "SW-TACT6";
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		wakeup {
 			label = "SW-TACT7";
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/exynos5250-snow-common.dtsi

@@ -37,7 +37,7 @@ power {
 			label = "Power";
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -46,7 +46,7 @@ lid-switch {
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/exynos5250-spring.dts

@@ -37,7 +37,7 @@ power {
 			label = "Power";
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -46,7 +46,7 @@ lid-switch {
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/exynos5250.dtsi

@@ -807,7 +807,7 @@ adc: adc@12D10000 {
 
 	sss@10830000 {
 		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
+		reg = <0x10830000 0x300>;
 		interrupts = <0 112 0>;
 		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";

arch/arm/boot/dts/exynos5410-pinctrl.dtsi

+/*
+ * Exynos5410 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Hardkernel Co., Ltd.
+ *              http://www.hardkernel.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm5: gpm5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm7: gpm7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy7: gpy7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>,
+		             <24 0>,
+		             <25 0>,
+		             <25 1>,
+		             <26 0>,
+		             <26 1>,
+		             <27 0>,
+		             <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>,
+		             <28 1>,
+		             <29 0>,
+		             <29 1>,
+		             <30 0>,
+		             <30 1>,
+		             <31 0>,
+		             <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_1 {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};

arch/arm/boot/dts/exynos5410-smdk5410.dts

@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5410.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 / {
 	model = "Samsung SMDK5410 board based on EXYNOS5410";
 	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
@@ -61,6 +62,46 @@ &mmc_2 {
 	disable-wp;
 };
 
+&pinctrl_0 {
+	srom_ctl: srom-ctl {
+		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	srom_ebi: srom-ebi {
+		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&sromc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+	ethernet@3,0 {
+		compatible = "smsc,lan9115";
+		reg = <3 0 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpx0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		smsc,force-internal-phy;
+
+		samsung,srom-page-mode = <1>;
+		samsung,srom-timing = <9 12 1 9 1 1>;
+	};
+};
+
 &uart0 {
 	status = "okay";
 };

arch/arm/boot/dts/exynos5410.dtsi

@@ -21,6 +21,10 @@ / {
 	interrupt-parent = <&gic>;
 
 	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -97,6 +101,17 @@ chipid@10000000 {
 			reg = <0x10000000 0x100>;
 		};
 
+		sromc: sromc@12250000 {
+			compatible = "samsung,exynos-srom";
+			reg = <0x12250000 0x14>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x04000000 0x20000
+				  1 0 0x05000000 0x20000
+				  2 0 0x06000000 0x20000
+				  3 0 0x07000000 0x20000>;
+		};
+
 		pmu_system_controller: system-controller@10040000 {
 			compatible = "samsung,exynos5410-pmu", "syscon";
 			reg = <0x10040000 0x5000>;
@@ -205,6 +220,36 @@ mmc_2: mmc@12220000 {
 			status = "disabled";
 		};
 
+		pinctrl_0: pinctrl@13400000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <0 45 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 0>;
+			};
+		};
+
+		pinctrl_1: pinctrl@14000000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x14000000 0x1000>;
+			interrupts = <0 46 0>;
+		};
+
+		pinctrl_2: pinctrl@10d10000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x10d10000 0x1000>;
+			interrupts = <0 50 0>;
+		};
+
+		pinctrl_3: pinctrl@03860000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <0 47 0>;
+		};
+
 		uart0: serial@12C00000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C00000 0x100>;
@@ -233,3 +278,5 @@ uart2: serial@12C20000 {
 		};
 	};
 };
+
+#include "exynos5410-pinctrl.dtsi"

arch/arm/boot/dts/exynos5420-arndale-octa.dts

@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
@@ -47,11 +48,19 @@ wakeup {
 			label = "SW-TACT1";
 			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &usbdrd_dwc3_1 {
 	dr_mode = "host";
 };

arch/arm/boot/dts/exynos5420-cpus.dtsi

+/*
+ * SAMSUNG EXYNOS5420 SoC cpu device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This file provides desired ordering for Exynos5420 and Exynos5800
+ * boards: CPU[0123] being the A15.
+ *
+ * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
+ * but particular boards choose different booting order.
+ *
+ * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
+ * booting cluster (big or LITTLE) is chosen by IROM code by reading
+ * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
+ * from the LITTLE: Cortex-A7.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+		};
+	};
+};

arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
 
 / {
 	model = "Google Peach Pit Rev 6+";
@@ -64,7 +65,7 @@ power {
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -73,7 +74,7 @@ lid-switch {
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -143,6 +144,14 @@ &adc {
 	vdd-supply = <&ldo9_reg>;
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	status = "okay";
 	pinctrl-names = "default";

arch/arm/boot/dts/exynos5420-smdk5420.dts

@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -89,6 +90,14 @@ usb301_vbus_reg: regulator-usb301 {
 
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;

arch/arm/boot/dts/exynos5420.dtsi

@@ -50,75 +50,121 @@ aliases {
 		usbdrdphy1 = &usbdrd_phy1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+	cluster_a15_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp@1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		opp@1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1212500>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		opp@1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1175000>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		opp@1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1137500>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		opp@1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1112500>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		opp@1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1037500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1012500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = < 987500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = < 962500>;
+			clock-latency-ns = <140000>;
 		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = < 937500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = < 912500>;
+			clock-latency-ns = <140000>;
+		};
+	};
 
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+	cluster_a7_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp@1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1275000>;
+			clock-latency-ns = <140000>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1212500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1162500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1112500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <140000>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <140000>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <937500>;
+			clock-latency-ns = <140000>;
 		};
 	};
 
+	/*
+	 * The 'cpus' node is not present here but instead it is provided
+	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
+	 */
+
 	cci: cci@10d20000 {
 		compatible = "arm,cci-400";
 		#address-cells = <1>;
@@ -252,8 +298,10 @@ gsc_pd: power-domain@10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
 		#power-domain-cells = <0>;
-		clocks = <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
-		clock-names = "asb0", "asb1";
+		clocks = <&clock CLK_FIN_PLL>,
+			 <&clock CLK_MOUT_USER_ACLK300_GSCL>,
+			 <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
+		clock-names = "oscclk", "clk0", "asb0", "asb1";
 	};
 
 	isp_pd: power-domain@10044020 {
@@ -859,7 +907,7 @@ watchdog: watchdog@101D0000 {
 
 	sss: sss@10830000 {
 		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
+		reg = <0x10830000 0x300>;
 		interrupts = <0 112 0>;
 		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";

arch/arm/boot/dts/exynos5422-cpus.dtsi

@@ -4,78 +4,98 @@
  * Copyright (c) 2015 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * The only difference between EXYNOS5422 and EXYNOS5800 is cpu ordering. The
- * EXYNOS5422 is booting from Cortex-A7 core while the EXYNOS5800 is booting
- * from Cortex-A15 core.
+ * This file provides desired ordering for Exynos5422: CPU[0123] being the A7.
  *
- * EXYNOS5422 based board files can include this file to provide cpu ordering
- * which could boot a cortex-a7 from cpu0.
+ * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
+ * but particular boards choose different booting order.
+ *
+ * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
+ * booting cluster (big or LITTLE) is chosen by IROM code by reading
+ * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
+ * from the LITTLE: Cortex-A7.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-&cpu0 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a7";
-	reg = <0x100>;
-	clock-frequency = <1000000000>;
-	cci-control-port = <&cci_control0>;
-};
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-&cpu1 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a7";
-	reg = <0x101>;
-	clock-frequency = <1000000000>;
-	cci-control-port = <&cci_control0>;
-};
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+		};
 
-&cpu2 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a7";
-	reg = <0x102>;
-	clock-frequency = <1000000000>;
-	cci-control-port = <&cci_control0>;
-};
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+		};
 
-&cpu3 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a7";
-	reg = <0x103>;
-	clock-frequency = <1000000000>;
-	cci-control-port = <&cci_control0>;
-};
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+		};
 
-&cpu4 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a15";
-	reg = <0x0>;
-	clock-frequency = <1800000000>;
-	cci-control-port = <&cci_control1>;
-};
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+		};
 
-&cpu5 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a15";
-	reg = <0x1>;
-	clock-frequency = <1800000000>;
-	cci-control-port = <&cci_control1>;
-};
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			clocks = <&clock CLK_ARM_CLK>;
+			reg = <0x0>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+		};
 
-&cpu6 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a15";
-	reg = <0x2>;
-	clock-frequency = <1800000000>;
-	cci-control-port = <&cci_control1>;
-};
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+		};
 
-&cpu7 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a15";
-	reg = <0x3>;
-	clock-frequency = <1800000000>;
-	cci-control-port = <&cci_control1>;
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+		};
+	};
 };

arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi

@@ -67,6 +67,14 @@ &clock_audss {
 			<19200000>;
 };
 
+&cpu0 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck2_reg>;
+};
+
 &hdmi {
 	status = "okay";
 	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/exynos5800-peach-pi.dts

@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5800.dtsi"
+#include "exynos5420-cpus.dtsi"
 
 / {
 	model = "Google Peach Pi Rev 10+";
@@ -63,7 +64,7 @@ power {
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -72,7 +73,7 @@ lid-switch {
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};
@@ -143,6 +144,14 @@ &adc {
 	vdd-supply = <&ldo9_reg>;
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	status = "okay";
 	pinctrl-names = "default";

arch/arm/boot/dts/exynos5800.dtsi

@@ -23,6 +23,114 @@ &clock {
 	compatible = "samsung,exynos5800-clock";
 };
 
+&cluster_a15_opp_table {
+	opp@1700000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1600000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1500000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@1400000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@1300000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@1200000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@1100000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@1000000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@900000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@800000000 {
+		opp-microvolt = <900000>;
+	};
+	opp@700000000 {
+		opp-microvolt = <900000>;
+	};
+	opp@600000000 {
+		opp-hz = /bits/ 64 <600000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@500000000 {
+		opp-hz = /bits/ 64 <500000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+};
+
+&cluster_a7_opp_table {
+	opp@1300000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1200000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1100000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1000000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@900000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@800000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@700000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@600000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@500000000 {
+		opp-hz = /bits/ 64 <500000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+};
+
 &mfc {
 	compatible = "samsung,mfc-v8";
 };

arch/arm/boot/dts/s5pv210-aquila.dts

@@ -257,7 +257,7 @@ power-key {
 			linux,code = <KEY_POWER>;
 			label = "power";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
@@ -268,7 +268,7 @@ &xusbxti {
 
 &keypad {
 	linux,input-no-autorepeat;
-	linux,input-wakeup;
+	wakeup-source;
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <3>;
 	pinctrl-names = "default";

arch/arm/boot/dts/s5pv210-goni.dts

@@ -239,7 +239,7 @@ power-key {
 			linux,code = <KEY_POWER>;
 			label = "power";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
@@ -250,7 +250,7 @@ &xusbxti {
 
 &keypad {
 	linux,input-no-autorepeat;
-	linux,input-wakeup;
+	wakeup-source;
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <3>;
 	pinctrl-names = "default";

arch/arm/boot/dts/s5pv210-smdkv210.dts

@@ -59,7 +59,7 @@ &xusbxti {
 
 &keypad {
 	linux,input-no-autorepeat;
-	linux,input-wakeup;
+	wakeup-source;
 	samsung,keypad-num-rows = <8>;
 	samsung,keypad-num-columns = <8>;
 	pinctrl-names = "default";