Commit fb165969 authored by Len Brown's avatar Len Brown

Pull misc-for-upstream into release branch

parents f188291a afd3810d
......@@ -181,19 +181,41 @@ and is between 256 and 4096 characters. It is defined in the file
that require a timer override, but don't have
HPET
acpi_dbg_layer= [HW,ACPI]
acpi.debug_layer= [HW,ACPI]
Format: <int>
Each bit of the <int> indicates an ACPI debug layer,
1: enable, 0: disable. It is useful for boot time
debugging. After system has booted up, it can be set
via /proc/acpi/debug_layer.
acpi_dbg_level= [HW,ACPI]
via /sys/module/acpi/parameters/debug_layer.
CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
Available bits (add the numbers together) to enable debug output
for specific parts of the ACPI subsystem:
0x01 utilities 0x02 hardware 0x04 events 0x08 tables
0x10 namespace 0x20 parser 0x40 dispatcher
0x80 executer 0x100 resources 0x200 acpica debugger
0x400 os services 0x800 acpica disassembler.
The number can be in decimal or prefixed with 0x in hex.
Warning: Many of these options can produce a lot of
output and make your system unusable. Be very careful.
acpi.debug_level= [HW,ACPI]
Format: <int>
Each bit of the <int> indicates an ACPI debug level,
1: enable, 0: disable. It is useful for boot time
debugging. After system has booted up, it can be set
via /proc/acpi/debug_level.
via /sys/module/acpi/parameters/debug_level.
CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
Available bits (add the numbers together) to enable different
debug output levels of the ACPI subsystem:
0x01 error 0x02 warn 0x04 init 0x08 debug object
0x10 info 0x20 init names 0x40 parse 0x80 load
0x100 dispatch 0x200 execute 0x400 names 0x800 operation region
0x1000 bfield 0x2000 tables 0x4000 values 0x8000 objects
0x10000 resources 0x20000 user requests 0x40000 package.
The number can be in decimal or prefixed with 0x in hex.
Warning: Many of these options can produce a lot of
output and make your system unusable. Be very careful.
acpi_fake_ecdt [HW,ACPI] Workaround failure due to BIOS lacking ECDT
......
......@@ -23,10 +23,13 @@ static int __init nvidia_hpet_check(struct acpi_table_header *header)
static int __init check_bridge(int vendor, int device)
{
#ifdef CONFIG_ACPI
static int warned;
/* According to Nvidia all timer overrides are bogus unless HPET
is enabled. */
if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) {
if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
if (!warned && acpi_table_parse(ACPI_SIG_HPET,
nvidia_hpet_check)) {
warned = 1;
acpi_skip_timer_override = 1;
printk(KERN_INFO "Nvidia board "
"detected. Ignoring ACPI "
......
......@@ -85,8 +85,8 @@ config ACPI_PROCFS
depends on ACPI
default y
---help---
Procfs interface for ACPI is made optional for back-compatible.
As the same functions are duplicated in sysfs interface
The Procfs interface for ACPI is made optional for backward compatibility.
As the same functions are duplicated in the sysfs interface
and this proc interface will be removed some time later,
it's marked as deprecated.
( /proc/acpi/debug_layer && debug_level are deprecated by
......
......@@ -44,11 +44,6 @@ MODULE_AUTHOR("Naveen B S <naveen.b.s@intel.com>");
MODULE_DESCRIPTION("Hotplug Mem Driver");
MODULE_LICENSE("GPL");
/* ACPI _STA method values */
#define ACPI_MEMORY_STA_PRESENT (0x00000001UL)
#define ACPI_MEMORY_STA_ENABLED (0x00000002UL)
#define ACPI_MEMORY_STA_FUNCTIONAL (0x00000008UL)
/* Memory Device States */
#define MEMORY_INVALID_STATE 0
#define MEMORY_POWER_ON_STATE 1
......@@ -204,9 +199,9 @@ static int acpi_memory_check_device(struct acpi_memory_device *mem_device)
* Check for device status. Device should be
* present/enabled/functioning.
*/
if (!((current_status & ACPI_MEMORY_STA_PRESENT)
&& (current_status & ACPI_MEMORY_STA_ENABLED)
&& (current_status & ACPI_MEMORY_STA_FUNCTIONAL)))
if (!((current_status & ACPI_STA_DEVICE_PRESENT)
&& (current_status & ACPI_STA_DEVICE_ENABLED)
&& (current_status & ACPI_STA_DEVICE_FUNCTIONING)))
return -ENODEV;
return 0;
......@@ -286,7 +281,7 @@ static int acpi_memory_powerdown_device(struct acpi_memory_device *mem_device)
return -ENODEV;
/* Check for device status. Device should be disabled */
if (current_status & ACPI_MEMORY_STA_ENABLED)
if (current_status & ACPI_STA_DEVICE_ENABLED)
return -EINVAL;
return 0;
......
......@@ -103,7 +103,9 @@ int acpi_bus_get_status(struct acpi_device *device)
else if (device->parent)
device->status = device->parent->status;
else
STRUCT_TO_INT(device->status) = 0x0F;
STRUCT_TO_INT(device->status) =
ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
if (device->status.functional && !device->status.present) {
printk(KERN_WARNING PREFIX "Device [%s] status [%08x]: "
......
......@@ -49,8 +49,6 @@ MODULE_AUTHOR("Anil S Keshavamurthy");
MODULE_DESCRIPTION("ACPI container driver");
MODULE_LICENSE("GPL");
#define ACPI_STA_PRESENT (0x00000001)
static int acpi_container_add(struct acpi_device *device);
static int acpi_container_remove(struct acpi_device *device, int type);
......@@ -75,13 +73,13 @@ static int is_device_present(acpi_handle handle)
status = acpi_get_handle(handle, "_STA", &temp);
if (ACPI_FAILURE(status))
return 1; /* _STA not found, assmue device present */
return 1; /* _STA not found, assume device present */
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
if (ACPI_FAILURE(status))
return 0; /* Firmware error */
return ((sta & ACPI_STA_PRESENT) == ACPI_STA_PRESENT);
return ((sta & ACPI_STA_DEVICE_PRESENT) == ACPI_STA_DEVICE_PRESENT);
}
/*******************************************************************/
......
......@@ -70,8 +70,6 @@
#define ACPI_PROCESSOR_LIMIT_USER 0
#define ACPI_PROCESSOR_LIMIT_THERMAL 1
#define ACPI_STA_PRESENT 0x00000001
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_core");
......@@ -779,7 +777,7 @@ static int is_processor_present(acpi_handle handle)
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
if (ACPI_FAILURE(status) || !(sta & ACPI_STA_PRESENT)) {
if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT)) {
ACPI_EXCEPTION((AE_INFO, status, "Processor Device is not present"));
return 0;
}
......
......@@ -51,14 +51,6 @@
#include <asm/apic.h>
#endif
/*
* Include the apic definitions for x86 to have the APIC timer related defines
* available also for UP (on SMP it gets magically included via linux/smp.h).
*/
#ifdef CONFIG_X86
#include <asm/apic.h>
#endif
#include <asm/io.h>
#include <asm/uaccess.h>
......
......@@ -1068,7 +1068,9 @@ acpi_add_single_object(struct acpi_device **child,
}
break;
default:
STRUCT_TO_INT(device->status) = 0x0F;
STRUCT_TO_INT(device->status) =
ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
break;
}
......
......@@ -350,21 +350,31 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
{
struct list_head *node, *next;
seq_printf(seq, "Device Sleep state Status\n");
seq_printf(seq, "Device\tS-state\t Status Sysfs node\n");
spin_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
struct device *ldev;
if (!dev->wakeup.flags.valid)
continue;
spin_unlock(&acpi_device_lock);
seq_printf(seq, "%4s %4d %s%8s\n",
ldev = acpi_get_physical_device(dev->handle);
seq_printf(seq, "%s\t S%d\t%c%-8s ",
dev->pnp.bus_id,
(u32) dev->wakeup.sleep_state,
dev->wakeup.flags.run_wake ? "*" : "",
dev->wakeup.flags.run_wake ? '*' : ' ',
dev->wakeup.state.enabled ? "enabled" : "disabled");
if (ldev)
seq_printf(seq, "%s:%s",
ldev->bus ? ldev->bus->name : "no-bus",
ldev->bus_id);
seq_printf(seq, "\n");
put_device(ldev);
spin_lock(&acpi_device_lock);
}
spin_unlock(&acpi_device_lock);
......
......@@ -26,7 +26,7 @@
/*
* The I/O port the PMTMR resides at.
* The location is detected during setup_arch(),
* in arch/i386/acpi/boot.c
* in arch/i386/kernel/acpi/boot.c
*/
u32 pmtmr_ioport __read_mostly;
......
......@@ -317,6 +317,10 @@ static int __init acpi_pci_init(void)
{
int ret;
if (acpi_gbl_FADT.boot_flags & BAF_MSI_NOT_SUPPORTED) {
printk(KERN_INFO"ACPI FADT declares the system doesn't support MSI, so disable it\n");
pci_no_msi();
}
ret = register_acpi_bus_type(&acpi_pci_bus);
if (ret)
return 0;
......
......@@ -276,6 +276,7 @@ enum acpi_prefered_pm_profiles {
#define BAF_LEGACY_DEVICES 0x0001
#define BAF_8042_KEYBOARD_CONTROLLER 0x0002
#define BAF_MSI_NOT_SUPPORTED 0x0008
#define FADT2_REVISION_ID 3
#define FADT2_MINUS_REVISION_ID 2
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment