Commit fc811472 authored by Joe Perches's avatar Joe Perches Committed by Greg Kroah-Hartman

tty: Remove unnecessary semicolons

These aren't necessary after switch and while blocks.
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b6951b8a
......@@ -959,7 +959,7 @@ static int receive_flow_control(struct nozomi *dc)
dev_err(&dc->pdev->dev,
"ERROR: flow control received for non-existing port\n");
return 0;
};
}
DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl),
*((u16 *)&ctrl_dl));
......@@ -1025,7 +1025,7 @@ static enum ctrl_port_type port2ctrl(enum port_type port,
dev_err(&dc->pdev->dev,
"ERROR: send flow control " \
"received for non-existing port\n");
};
}
return CTRL_ERROR;
}
......@@ -1805,7 +1805,7 @@ static int ntty_ioctl(struct tty_struct *tty,
default:
DBG1("ERR: 0x%08X, %d", cmd, cmd);
break;
};
}
return rval;
}
......
......@@ -680,7 +680,7 @@ static int bfin_serial_startup(struct uart_port *port)
default:
uart_dma_ch_rx = uart_dma_ch_tx = 0;
break;
};
}
if (uart_dma_ch_rx &&
request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
......@@ -765,7 +765,7 @@ static void bfin_serial_shutdown(struct uart_port *port)
break;
default:
break;
};
}
#endif
free_irq(uart->rx_irq, uart);
free_irq(uart->tx_irq, uart);
......
......@@ -832,7 +832,7 @@ ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag,
up->curregs[5] |= Tx8;
up->parity_mask = 0xff;
break;
};
}
up->curregs[4] &= ~0x0c;
if (cflag & CSTOPB)
up->curregs[4] |= SB2;
......
......@@ -690,7 +690,7 @@ static void max310x_handle_tx(struct uart_port *port)
max310x_port_write(port, MAX310X_THR_REG,
xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
};
}
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
......
......@@ -1072,7 +1072,7 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
uap->curregs[5] |= Tx8;
uap->parity_mask = 0xff;
break;
};
}
uap->curregs[4] &= ~(SB_MASK);
if (cflag & CSTOPB)
uap->curregs[4] |= SB2;
......
......@@ -894,7 +894,7 @@ static int sunsab_console_setup(struct console *con, char *options)
case B115200: baud = 115200; break;
case B230400: baud = 230400; break;
case B460800: baud = 460800; break;
};
}
/*
* Temporary fix.
......
......@@ -522,7 +522,7 @@ static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
serio_interrupt(&up->serio, ch, 0);
#endif
break;
};
}
}
} while (serial_in(up, UART_LSR) & UART_LSR_DR);
}
......
......@@ -319,7 +319,7 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
serio_interrupt(&up->serio, ch, 0);
#endif
break;
};
}
}
}
......@@ -897,7 +897,7 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
up->curregs[R5] |= Tx8;
up->parity_mask = 0xff;
break;
};
}
up->curregs[R4] &= ~0x0c;
if (cflag & CSTOPB)
up->curregs[R4] |= SB2;
......@@ -1239,7 +1239,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
default: case B9600: baud = 9600; break;
case B19200: baud = 19200; break;
case B38400: baud = 38400; break;
};
}
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
......
......@@ -269,7 +269,7 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port)
return 1;
bdp++;
};
}
}
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment