Commit fc811472 authored by Joe Perches's avatar Joe Perches Committed by Greg Kroah-Hartman

tty: Remove unnecessary semicolons

These aren't necessary after switch and while blocks.
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b6951b8a
...@@ -959,7 +959,7 @@ static int receive_flow_control(struct nozomi *dc) ...@@ -959,7 +959,7 @@ static int receive_flow_control(struct nozomi *dc)
dev_err(&dc->pdev->dev, dev_err(&dc->pdev->dev,
"ERROR: flow control received for non-existing port\n"); "ERROR: flow control received for non-existing port\n");
return 0; return 0;
}; }
DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl), DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl),
*((u16 *)&ctrl_dl)); *((u16 *)&ctrl_dl));
...@@ -1025,7 +1025,7 @@ static enum ctrl_port_type port2ctrl(enum port_type port, ...@@ -1025,7 +1025,7 @@ static enum ctrl_port_type port2ctrl(enum port_type port,
dev_err(&dc->pdev->dev, dev_err(&dc->pdev->dev,
"ERROR: send flow control " \ "ERROR: send flow control " \
"received for non-existing port\n"); "received for non-existing port\n");
}; }
return CTRL_ERROR; return CTRL_ERROR;
} }
...@@ -1805,7 +1805,7 @@ static int ntty_ioctl(struct tty_struct *tty, ...@@ -1805,7 +1805,7 @@ static int ntty_ioctl(struct tty_struct *tty,
default: default:
DBG1("ERR: 0x%08X, %d", cmd, cmd); DBG1("ERR: 0x%08X, %d", cmd, cmd);
break; break;
}; }
return rval; return rval;
} }
......
...@@ -680,7 +680,7 @@ static int bfin_serial_startup(struct uart_port *port) ...@@ -680,7 +680,7 @@ static int bfin_serial_startup(struct uart_port *port)
default: default:
uart_dma_ch_rx = uart_dma_ch_tx = 0; uart_dma_ch_rx = uart_dma_ch_tx = 0;
break; break;
}; }
if (uart_dma_ch_rx && if (uart_dma_ch_rx &&
request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) { request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
...@@ -765,7 +765,7 @@ static void bfin_serial_shutdown(struct uart_port *port) ...@@ -765,7 +765,7 @@ static void bfin_serial_shutdown(struct uart_port *port)
break; break;
default: default:
break; break;
}; }
#endif #endif
free_irq(uart->rx_irq, uart); free_irq(uart->rx_irq, uart);
free_irq(uart->tx_irq, uart); free_irq(uart->tx_irq, uart);
......
...@@ -832,7 +832,7 @@ ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag, ...@@ -832,7 +832,7 @@ ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag,
up->curregs[5] |= Tx8; up->curregs[5] |= Tx8;
up->parity_mask = 0xff; up->parity_mask = 0xff;
break; break;
}; }
up->curregs[4] &= ~0x0c; up->curregs[4] &= ~0x0c;
if (cflag & CSTOPB) if (cflag & CSTOPB)
up->curregs[4] |= SB2; up->curregs[4] |= SB2;
......
...@@ -690,7 +690,7 @@ static void max310x_handle_tx(struct uart_port *port) ...@@ -690,7 +690,7 @@ static void max310x_handle_tx(struct uart_port *port)
max310x_port_write(port, MAX310X_THR_REG, max310x_port_write(port, MAX310X_THR_REG,
xmit->buf[xmit->tail]); xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
}; }
} }
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
......
...@@ -1072,7 +1072,7 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, ...@@ -1072,7 +1072,7 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
uap->curregs[5] |= Tx8; uap->curregs[5] |= Tx8;
uap->parity_mask = 0xff; uap->parity_mask = 0xff;
break; break;
}; }
uap->curregs[4] &= ~(SB_MASK); uap->curregs[4] &= ~(SB_MASK);
if (cflag & CSTOPB) if (cflag & CSTOPB)
uap->curregs[4] |= SB2; uap->curregs[4] |= SB2;
......
...@@ -894,7 +894,7 @@ static int sunsab_console_setup(struct console *con, char *options) ...@@ -894,7 +894,7 @@ static int sunsab_console_setup(struct console *con, char *options)
case B115200: baud = 115200; break; case B115200: baud = 115200; break;
case B230400: baud = 230400; break; case B230400: baud = 230400; break;
case B460800: baud = 460800; break; case B460800: baud = 460800; break;
}; }
/* /*
* Temporary fix. * Temporary fix.
......
...@@ -522,7 +522,7 @@ static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break) ...@@ -522,7 +522,7 @@ static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
serio_interrupt(&up->serio, ch, 0); serio_interrupt(&up->serio, ch, 0);
#endif #endif
break; break;
}; }
} }
} while (serial_in(up, UART_LSR) & UART_LSR_DR); } while (serial_in(up, UART_LSR) & UART_LSR_DR);
} }
......
...@@ -319,7 +319,7 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up, ...@@ -319,7 +319,7 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
serio_interrupt(&up->serio, ch, 0); serio_interrupt(&up->serio, ch, 0);
#endif #endif
break; break;
}; }
} }
} }
...@@ -897,7 +897,7 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, ...@@ -897,7 +897,7 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
up->curregs[R5] |= Tx8; up->curregs[R5] |= Tx8;
up->parity_mask = 0xff; up->parity_mask = 0xff;
break; break;
}; }
up->curregs[R4] &= ~0x0c; up->curregs[R4] &= ~0x0c;
if (cflag & CSTOPB) if (cflag & CSTOPB)
up->curregs[R4] |= SB2; up->curregs[R4] |= SB2;
...@@ -1239,7 +1239,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options) ...@@ -1239,7 +1239,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
default: case B9600: baud = 9600; break; default: case B9600: baud = 9600; break;
case B19200: baud = 19200; break; case B19200: baud = 19200; break;
case B38400: baud = 38400; break; case B38400: baud = 38400; break;
}; }
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
......
...@@ -269,7 +269,7 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port) ...@@ -269,7 +269,7 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port)
return 1; return 1;
bdp++; bdp++;
}; }
} }
/* /*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment