ARM: sun5i: dt: enable DMA on SPI

All of our SPI controllers support DMA transfers, so let's add the
properties here so they can be used when it's best to do so.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -314,6 +314,8 @@ spi0: spi@01c05000 {
 			interrupts = <10>;
 			clocks = <&ahb_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 27>, <&dma 1 26>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -325,6 +327,8 @@ spi1: spi@01c06000 {
 			interrupts = <11>;
 			clocks = <&ahb_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 9>, <&dma 1 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -411,6 +415,8 @@ spi2: spi@01c17000 {
 			interrupts = <12>;
 			clocks = <&ahb_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 29>, <&dma 1 28>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -312,6 +312,8 @@ spi0: spi@01c05000 {
 			interrupts = <10>;
 			clocks = <&ahb_gates 20>, <&spi0_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 27>, <&dma 1 26>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -323,6 +325,8 @@ spi1: spi@01c06000 {
 			interrupts = <11>;
 			clocks = <&ahb_gates 21>, <&spi1_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 9>, <&dma 1 8>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -384,6 +388,8 @@ spi2: spi@01c17000 {
 			interrupts = <12>;
 			clocks = <&ahb_gates 22>, <&spi2_clk>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 1 29>, <&dma 1 28>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;