Skip to content

L
linux
Switch branch/tag
  1. 29 Jun, 2019 24 commits
  3. 28 Jun, 2019 10 commits
    • Trond Myklebust's avatar
      NFS/flexfiles: Use the correct TCP timeout for flexfiles I/O · 68f46159
      Trond Myklebust authored 
      Fix a typo where we're confusing the default TCP retrans value
(NFS_DEF_TCP_RETRANS) for the default TCP timeout value.

Fixes: 15d03055 ("pNFS/flexfiles: Set reasonable default ...")
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: default avatarTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: default avatarAnna Schumaker <Anna.Schumaker@Netapp.com>
      68f46159
    • Trond Myklebust's avatar
      SUNRPC: Fix up calculation of client message length · 7e3d3620
      Trond Myklebust authored 
      In the case where a record marker was used, xs_sendpages() needs
to return the length of the payload + record marker so that we
operate correctly in the case of a partial transmission.
When the callers check return value, they therefore need to
take into account the record marker length.

Fixes: 06b5fc3a ("Merge tag 'nfs-rdma-for-5.1-1'...")
Cc: stable@vger.kernel.org # 5.1+
Signed-off-by: default avatarTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: default avatarAnna Schumaker <Anna.Schumaker@Netapp.com>
      7e3d3620
    • Linus Torvalds's avatar
      Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux · 556e2f60
      Linus Torvalds authored 
      Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes and one core framework fix

   - Do a DT/firmware lookup in clk_core_get() even when the DT index is
     a nonsensical value

   - Fix some clk data typos in the Amlogic DT headers/code

   - Avoid returning junk in the TI clk driver when an invalid clk is
     looked for

   - Fix dividers for the emac clks on Stratix10 SoCs

   - Fix default HDA rates on Tegra210 to correct distorted audio"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: socfpga: stratix10: fix divider entry for the emac clocks
  clk: Do a DT parent lookup even when index < 0
  clk: tegra210: Fix default rates for HDA clocks
  clk: ti: clkctrl: Fix returning uninitialized data
  clk: meson: meson8b: fix a typo in the VPU parent names array variable
  clk: meson: fix MPLL 50M binding id typo
      556e2f60
    • Linus Torvalds's avatar
      Merge tag 'for-5.2/dm-fixes-2' of... · 65ee21eb
      Linus Torvalds authored 
      Merge tag 'for-5.2/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix incorrect uses of kstrndup and DM logging macros in DM's early
   init code.

 - Fix DM log-writes target's handling of super block sectors so updates
   are made in order through use of completion.

 - Fix DM core's argument splitting code to avoid undefined behaviour
   reported as a side-effect of UBSAN analysis on ppc64le.

 - Fix DM verity target to limit the amount of error messages that can
   result from a corrupt block being found.

* tag 'for-5.2/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: use message limit for data block corruption message
  dm table: don't copy from a NULL pointer in realloc_argv()
  dm log writes: make sure super sector log updates are written in order
  dm init: remove trailing newline from calls to DMERR() and DMINFO()
  dm init: fix incorrect uses of kstrndup()
      65ee21eb
    • Linus Torvalds's avatar
      Merge tag 'for-linus-20190627' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux · 7a702b4e
      Linus Torvalds authored 
      Pull pidfd fixes from Christian Brauner:
 "Userspace tools and libraries such as strace or glibc need a cheap and
  reliable way to tell whether CLONE_PIDFD is supported. The easiest way
  is to pass an invalid fd value in the return argument, perform the
  syscall and verify the value in the return argument has been changed
  to a valid fd.

  However, if CLONE_PIDFD is specified we currently check if pidfd == 0
  and return EINVAL if not.

  The check for pidfd == 0 was originally added to enable us to abuse
  the return argument for passing additional flags along with
  CLONE_PIDFD in the future.

  However, extending legacy clone this way would be a terrible idea and
  with clone3 on the horizon and the ability to reuse CLONE_DETACHED
  with CLONE_PIDFD there's no real need for this clutch. So remove the
  pidfd == 0 check and help userspace out.

  Also, accordig to Al, anon_inode_getfd() should only be used past the
  point of no failure and ksys_close() should not be used at all since
  it is far too easy to get wrong. Al's motto being "basically, once
  it's in descriptor table, it's out of your control". So Al's patch
  switches back to what we already had in v1 of the original patchset
  and uses a anon_inode_getfile() + put_user() + fd_install() sequence
  in the success path and a fput() + put_unused_fd() in the failure
  path.

  The other two changes should be trivial"

* tag 'for-linus-20190627' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  proc: remove useless d_is_dir() check
  copy_process(): don't use ksys_close() on cleanups
  samples: make pidfd-metadata fail gracefully on older kernels
  fork: don't check parent_tidptr with CLONE_PIDFD
      7a702b4e
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid · 763cf1f2
      Linus Torvalds authored 
      Pull HID fixes from Jiri Kosina:

 - fix for one corner case in HID++ protocol with respect to handling
   very long reports, from Hans de Goede

 - power management fix in Intel-ISH driver, from Hyungwoo Yang

 - use-after-free fix in Intel-ISH driver, from Dan Carpenter

 - a couple of new device IDs/quirks from Kai-Heng Feng, Kyle Godbey and
   Oleksandr Natalenko

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: fix wrong driver_data usage
  HID: multitouch: Add pointstick support for ALPS Touchpad
  HID: logitech-dj: Fix forwarding of very long HID++ reports
  HID: uclogic: Add support for Huion HS64 tablet
  HID: chicony: add another quirk for PixArt mouse
  HID: intel-ish-hid: Fix a use after free in load_fw_from_host()
      763cf1f2
    • Linus Torvalds's avatar
      Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc · fe2da896
      Linus Torvalds authored 
      Pull ARM SoC fixes from Olof Johansson:
 "A smaller batch of fixes, nothing that stands out as risky or scary.

  Mostly DTS tweaks for a few issues:

   - GPU fixlets for Meson

   - CPU idle fix for LS1028A

   - PWM interrupt fixes for i.MX6UL

  Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
  two MAINTAINER tweaks"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: imx6ul: fix PWM[1-4] interrupts
  ARM: omap2: remove incorrect __init annotation
  ARM: dts: gemini Fix up DNS-313 compatible string
  ARM: dts: Blank D-Link DIR-685 console
  arm64: defconfig: Enable FSL_EDMA driver
  arm64: dts: ls1028a: Fix CPU idle fail.
  MAINTAINERS: BCM53573: Add internal Broadcom mailing list
  MAINTAINERS: BCM2835: Add internal Broadcom mailing list
  ARM: dts: meson8b: fix the operating voltage of the Mali GPU
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
      fe2da896
    • Linus Torvalds's avatar
      Merge tag 'afs-fixes-20190620' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs · cd0f3aae
      Linus Torvalds authored 
      Pull AFS fixes from David Howells:
 "The in-kernel AFS client has been undergoing testing on opendev.org on
  one of their mirror machines. They are using AFS to hold data that is
  then served via apache, and Ian Wienand had reported seeing oopses,
  spontaneous machine reboots and updates to volumes going missing. This
  patch series appears to have fixed the problem, very probably due to
  patch (2), but it's not 100% certain.

  (1) Fix the printing of the "vnode modified" warning to exclude checks
      on files for which we don't have a callback promise from the
      server (and so don't expect the server to tell us when it
      changes).

      Without this, for every file or directory for which we still have
      an in-core inode that gets changed on the server, we may get a
      message logged when we next look at it. This can happen in bulk
      if, for instance, someone does "vos release" to update a R/O
      volume from a R/W volume and a whole set of files are all changed
      together.

      We only really want to log a message if the file changed and the
      server didn't tell us about it or we failed to track the state
      internally.

  (2) Fix accidental corruption of either afs_vlserver struct objects or
      the the following memory locations (which could hold anything).
      The issue is caused by a union that points to two different
      structs in struct afs_call (to save space in the struct). The call
      cleanup code assumes that it can simply call the cleanup for one
      of those structs if not NULL - when it might be actually pointing
      to the other struct.

      This means that every Volume Location RPC op is going to corrupt
      something.

  (3) Fix an uninitialised spinlock. This isn't too bad, it just causes
      a one-off warning if lockdep is enabled when "vos release" is
      called, but the spinlock still behaves correctly.

  (4) Fix the setting of i_block in the inode. This causes du, for
      example, to produce incorrect results, but otherwise should not be
      dangerous to the kernel"

* tag 'afs-fixes-20190620' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix setting of i_blocks
  afs: Fix uninitialised spinlock afs_volume::cb_break_lock
  afs: Fix vlserver record corruption
  afs: Fix over zealous "vnode modified" warnings
      cd0f3aae
    • Linus Torvalds's avatar
      Merge tag 'csky-for-linus-5.2-fixup-gcc-unwind' of git://github.com/c-sky/csky-linux · 139ca258
      Linus Torvalds authored 
      Pull arch/csky fixup from Guo Ren:
 "A fixup patch for rt_sigframe in signal.c"

* tag 'csky-for-linus-5.2-fixup-gcc-unwind' of git://github.com/c-sky/csky-linux:
  csky: Fixup libgcc unwind error
      139ca258
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · c84afab0
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Fix ppp_mppe crypto soft dependencies, from Takashi Iawi.

 2) Fix TX completion to be finite, from Sergej Benilov.

 3) Use register_pernet_device to avoid a dst leak in tipc, from Xin
    Long.

 4) Double free of TX cleanup in Dirk van der Merwe.

 5) Memory leak in packet_set_ring(), from Eric Dumazet.

 6) Out of bounds read in qmi_wwan, from Bjørn Mork.

 7) Fix iif used in mcast/bcast looped back packets, from Stephen
    Suryaputra.

 8) Fix neighbour resolution on raw ipv6 sockets, from Nicolas Dichtel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
  af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET
  sctp: change to hold sk after auth shkey is created successfully
  ipv6: fix neighbour resolution with raw socket
  ipv6: constify rt6_nexthop()
  net: dsa: microchip: Use gpiod_set_value_cansleep()
  net: aquantia: fix vlans not working over bridged network
  ipv4: reset rt_iif for recirculated mcast/bcast out pkts
  team: Always enable vlan tx offload
  net/smc: Fix error path in smc_init
  net/smc: hold conns_lock before calling smc_lgr_register_conn()
  bonding: Always enable vlan tx offload
  net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down"
  ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop
  qmi_wwan: Fix out-of-bounds read
  tipc: check msg->req data len in tipc_nl_compat_bearer_disable
  net: macb: do not copy the mac address if NULL
  net/packet: fix memory leak in packet_set_ring()
  net/tls: fix page double free on TX cleanup
  net/sched: cbs: Fix error path of cbs_module_init
  tipc: change to use register_pernet_device
  ...
      c84afab0
  5. 27 Jun, 2019 6 commits
    • Jeff Layton's avatar
      ceph: fix ceph_mdsc_build_path to not stop on first component · d6b8bd67
      Jeff Layton authored 
      When ceph_mdsc_build_path is handed a positive dentry, it will return a
zero-length path string with the base set to that dentry.  This is not
what we want.  Always include at least one path component in the string.

ceph_mdsc_build_path has behaved this way for a long time but it didn't
matter until recent d_name handling rework.

Fixes: 964fff74 ("ceph: use ceph_mdsc_build_path instead of clone_dentry_name")
Signed-off-by: default avatarJeff Layton <jlayton@kernel.org>
Reviewed-by: default avatar"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: default avatarIlya Dryomov <idryomov@gmail.com>
      d6b8bd67
    • Nicolas Boichat's avatar
      pinctrl: mediatek: Update cur_mask in mask/mask ops · 9d957a95
      Nicolas Boichat authored 
      During suspend/resume, mtk_eint_mask may be called while
wake_mask is active. For example, this happens if a wake-source
with an active interrupt handler wakes the system:
irq/pm.c:irq_pm_check_wakeup would disable the interrupt, so
that it can be handled later on in the resume flow.

However, this may happen before mtk_eint_do_resume is called:
in this case, wake_mask is loaded, and cur_mask is restored
from an older copy, re-enabling the interrupt, and causing
an interrupt storm (especially for level interrupts).

Step by step, for a line that has both wake and interrupt enabled:
 1. cur_mask[irq] = 1; wake_mask[irq] = 1; EINT_EN[irq] = 1 (interrupt
    enabled at hardware level)
 2. System suspends, resumes due to that line (at this stage EINT_EN
    == wake_mask)
 3. irq_pm_check_wakeup is called, and disables the interrupt =>
    EINT_EN[irq] = 0, but we still have cur_mask[irq] = 1
 4. mtk_eint_do_resume is called, and restores EINT_EN = cur_mask, so
    it reenables EINT_EN[irq] = 1 => interrupt storm as the driver
    is not yet ready to handle the interrupt.

This patch fixes the issue in step 3, by recording all mask/unmask
changes in cur_mask. This also avoids the need to read the current
mask in eint_do_suspend, and we can remove mtk_eint_chip_read_mask
function.

The interrupt will be re-enabled properly later on, sometimes after
mtk_eint_do_resume, when the driver is ready to handle it.

Fixes: 58a5e1b6 ("pinctrl: mediatek: Implement wake handler and suspend resume")
Signed-off-by: default avatarNicolas Boichat <drinkcat@chromium.org>
Acked-by: default avatarSean Wang <sean.wang@kernel.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      9d957a95
    • Christian Brauner's avatar
      proc: remove useless d_is_dir() check · 30d158b1
      Christian Brauner authored 
      Remove the d_is_dir() check from tgid_pidfd_to_pid().

It is pointless since you should never get &proc_tgid_base_operations
for f_op on a non-directory.
Suggested-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarChristian Brauner <christian@brauner.io>
      30d158b1
    • Al Viro's avatar
      copy_process(): don't use ksys_close() on cleanups · 6fd2fe49
      Al Viro authored 
      anon_inode_getfd() should be used *ONLY* in situations when we are
guaranteed to be past the last failure point (including copying the
descriptor number to userland, at that).  And ksys_close() should
not be used for cleanups at all.

anon_inode_getfile() is there for all nontrivial cases like that.
Just use that...

Fixes: b3e58382 ("clone: add CLONE_PIDFD")
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Reviewed-by: default avatarJann Horn <jannh@google.com>
Signed-off-by: default avatarChristian Brauner <christian@brauner.io>
      6fd2fe49
    • Neil Horman's avatar
      af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET · 89ed5b51
      Neil Horman authored 
      When an application is run that:
a) Sets its scheduler to be SCHED_FIFO
and
b) Opens a memory mapped AF_PACKET socket, and sends frames with the
MSG_DONTWAIT flag cleared, its possible for the application to hang
forever in the kernel.  This occurs because when waiting, the code in
tpacket_snd calls schedule, which under normal circumstances allows
other tasks to run, including ksoftirqd, which in some cases is
responsible for freeing the transmitted skb (which in AF_PACKET calls a
destructor that flips the status bit of the transmitted frame back to
available, allowing the transmitting task to complete).

However, when the calling application is SCHED_FIFO, its priority is
such that the schedule call immediately places the task back on the cpu,
preventing ksoftirqd from freeing the skb, which in turn prevents the
transmitting task from detecting that the transmission is complete.

We can fix this by converting the schedule call to a completion
mechanism.  By using a completion queue, we force the calling task, when
it detects there are no more frames to send, to schedule itself off the
cpu until such time as the last transmitted skb is freed, allowing
forward progress to be made.

Tested by myself and the reporter, with good results

Change Notes:

V1->V2:
	Enhance the sleep logic to support being interruptible and
allowing for honoring to SK_SNDTIMEO (Willem de Bruijn)

V2->V3:
	Rearrage the point at which we wait for the completion queue, to
avoid needing to check for ph/skb being null at the end of the loop.
Also move the complete call to the skb destructor to avoid needing to
modify __packet_set_status.  Also gate calling complete on
packet_read_pending returning zero to avoid multiple calls to complete.
(Willem de Bruijn)

	Move timeo computation within loop, to re-fetch the socket
timeout since we also use the timeo variable to record the return code
from the wait_for_complete call (Neil Horman)

V3->V4:
	Willem has requested that the control flow be restored to the
previous state.  Doing so lets us eliminate the need for the
po->wait_on_complete flag variable, and lets us get rid of the
packet_next_frame function, but introduces another complexity.
Specifically, but using the packet pending count, we can, if an
applications calls sendmsg multiple times with MSG_DONTWAIT set, each
set of transmitted frames, when complete, will cause
tpacket_destruct_skb to issue a complete call, for which there will
never be a wait_on_completion call.  This imbalance will lead to any
future call to wait_for_completion here to return early, when the frames
they sent may not have completed.  To correct this, we need to re-init
the completion queue on every call to tpacket_snd before we enter the
loop so as to ensure we wait properly for the frames we send in this
iteration.

	Change the timeout and interrupted gotos to out_put rather than
out_status so that we don't try to free a non-existant skb
	Clean up some extra newlines (Willem de Bruijn)
Reviewed-by: default avatarWillem de Bruijn <willemb@google.com>
Signed-off-by: default avatarNeil Horman <nhorman@tuxdriver.com>
Reported-by: default avatarMatteo Croce <mcroce@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      89ed5b51
    • Xin Long's avatar
      sctp: change to hold sk after auth shkey is created successfully · 25bff6d5
      Xin Long authored 
      Now in sctp_endpoint_init(), it holds the sk then creates auth
shkey. But when the creation fails, it doesn't release the sk,
which causes a sk defcnf leak,

Here to fix it by only holding the sk when auth shkey is created
successfully.

Fixes: a29a5bd4 ("[SCTP]: Implement SCTP-AUTH initializations.")
Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com
Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Acked-by: default avatarNeil Horman <nhorman@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      25bff6d5
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7