From: Michael Hunold <hunold@linuxtv.org>

add support for the DEC3000-s (Alex Woods)

use the hotplug firmware loader for 2.6 kernels instead of compiling the
firmware into the module (Alex Woods)

From: Michael Hunold <hunold@linuxtv.org>

use new firmware_class firmware loading facilities in dvb-ttpci/av7110 driver

From: Michael Hunold <hunold@linuxtv.org>

av7110: follow changes in saa7146_core regarding saa7146_set_gpio() and
saa7146_wait_for_debi_done() function

av7110: increased I2C speed to 275 kHz, follow introduction of
SAA7146_I2C_SHORT_DELAY flag to speed up I2C access

budget: make budget-ci use this gpio function and the new wait_...()
function, this fixes
BORROWED_FROM_AV7110_H_BUT_REALLY_BELONGS_IN_SAA7146_DEFS_H remark

budget: use alternative values for BRS setup on budget cards (by Rober
Schlabbach)

budget: remote control table should be filled completely.  at least populate
the entries that come with the standard Hauppauge RC (Jamie Honan)

ttpci-eeprom: add proper MODULE_LICENSE("GPL") so we don't taint the kernel
anymore

From: Michael Hunold <hunold@linuxtv.org>

alps_tdmb7, cx24110: use correct delay values, don't divide by HZ when using
dvb_delay(), found by Artur Skawina

alps_tdmb7: set FE_HAS_LOCK only when all low-order bits are valid

mt312: patch for the mt312 module, targeting the VP310: reduced heat,
implement "auto" inversion mode, remove debugging verbosity, add module
parameter for debugging (Augusto Cardoso)

nxt6000: code review and beautification, use per i2c-adapater void pointer
for private data in nxt_attach() / nxt_detach, fix frontend private data
handling.  patch by Mikael Rosbacke <rosbacke at nada.kth.se>

sp887x: firmware loader implementation contributed by Martin Stubbs, C99
comile fixes by Wolfgang Thiel

stv0299: Added new module parameter to choose between BER and UCBLOCKs error
monitoring since the STV0299 can't do both at once, Added modifications based
on the recommended settings in the SU1278 datasheet.

tda1004x: remove FE_CAN_INVERSION_AUTO

ves1820:completed nokia board support, increased some delays to get constant
results,set default pwm value to 0x48 for boards which don't have an eeprom
(by Andreas Oberritter)

From: Michael Hunold <hunold@linuxtv.org>

add a parameter to dvb_filter_pes2ts function to specify whether the packet
is a payload unit start or not.

new section demux code by emard

change license GPL -> LGPL for dvb_ringbuffer, like all other DVB core files

fix rare crash on invalid packets, patch by Asier Aguirre

i2c: copy the data variable as well on register client so that detach sees it.

From: Michael Hunold <hunold@linuxtv.org>

Complete revamp of the original driver: code beautification + linux coding
sytle, full diseqc support, hardware filtering support, support for different
card revisions and lots of other stuff.

From: Michael Hunold <hunold@linuxtv.org>

new DVB driver for bt878 based "budget" DVB cards (Nebula, Pinnacle PCTV,
Twinhan DST)

From: Michael Hunold <hunold@linuxtv.org>

fix a bunch of race conditions and locking bugs in video and vbi capture
code on device closure

use vmalloc_32() instead of vmalloc() in saa7146_vmalloc_build_pgtable().
this makes sure that the pagetable is in lowmem kernel memory

i2c timeout fix by Gerd Knorr 

SAA7146_I2C_SHORT_DELAY flag to speed up I2C access by Oliver Endriss

move saa7146_set_gpio() from saa7146_vv to saa7146_core, it's needed by DVB
budget drivers

add "new" saa7146_wait_for_debi_done() function, remove other versions from
av7110 and budget.ci

make budget-ci use this gpio function and the new wait_...() function,

make saa7146_pgtable_build_single() deliver a return code, make sanity
checks of the arguments

sanitize enabling of video input pins and i2c pins, use some default
values, so the hardware is always in a sane state

remove SAA7146_EXT_SWAP_ODD_EVEN flag + handling, fix the hardware
initialization instead

change minimal picture size to 48x32 just like other drivers

set up arbitrition control for video dma3 correctly

remove unnecessary code for capture to framebuffer memory, it's handled in
the generic code

From: Michael Hunold <hunold@convergence.de>

Remove av7110 firmware

From: Jan Kara <jack@suse.cz>

Fix en error exit path so that we correctly unaccount for quota-related space
reservations on ENOSPC.

Fix a warning on 64-bit machines.

From: "Zhu, Yi" <yi.zhu@intel.com>

The "make rpm" rule in top Makefile isn't aware of the enviorment ARCH.  For
example, people issue "make ARCH=ia64" to compile the ia64 kernel on i386
platform for cross compilation.  This works pretty well now.  But if one uses
"make rpm ARCH=ia64", it will fail.  Because current rpm rule in Makefile and
mkspec are not aware of ARCH.

From: john stultz <johnstul@us.ibm.com>

Converts all uses of jiffies to jiffies_64 in x86 time sources to avoid
jiffies overflow problems.

(Contributions from Tim Schmielau <tim@physik3.uni-rostock.de>)

fgets puts a \n in the buffer before the terminating \0.

into nuts.ninka.net:/disk1/davem/BK/sparc-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

The attached patch adds support for suspend/resume to the sis900 driver.
With this patch on resume the NIC is fully configured and operational,
before a module reload was needed because of the complete lack of
suspend/resume callbacks.

I added two functions, sis900_suspend and sis900_resume, with their
pointers in struct pci_driver. A vector of 16 u32 was then needed to the
to keep PCI data during suspend. I added it in struct sis900_private.
I updated the revision number to reflect my changes. 
Looking at the code I also killed three typos.

The patch doesn't touch any other code.

Since I don't know anything on ethernet drivers the rule 'works for me'
is fully valid.

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

From: Joe Thornber <thornber@sistina.com>

You can no longer call dm_table_event() from interrupt context.

From: Joe Thornber <thornber@sistina.com>

Make sure that a target has a sensible set of default io restrictions.

From: Joe Thornber <thornber@sistina.com>

Make the version-4 ioctl interface the default kernel configuration option.
If you have out of date tools you will need to use the v1 interface.

From: Joe Thornber <thornber@sistina.com>

The dm table size is always known in advance, so we can specify it in
dm_table_create(), rather than relying on dynamic resizing.

From: Joe Thornber <thornber@sistina.com>

When setting the size of a Device-Mapper device in the gendisk entry, also
try to set the size of the corresponding block_device entry's inode.  This is
necessary to allow online device/filesystem resizing to work correctly. 
[Kevin Corry]

From: viro@parcelfarce.linux.theplanet.co.uk

When we register disks, we mangle the disk names that contain slashes (e.g.
cciss/c0d0) replacing them with '!' in corresponding sysfs names.  So
name_to_dev_t() should mangle the name in the same way before looking for it
in /sys/block.

From: Rusty Russell <rusty@rustcorp.com.au>

Entirely revised, and largely rewritten.  Has a continuing example now, which
I think makes things clearer.  Also covers Read Copy Update.  This version
further deprecates rwlock_t, shuffles sections for better organization.

From: Alan Cox <alan@redhat.com>

VIA audio had a fix from 2.4 missing so any user could spam the system log. Also
include a fix for a bug which is pending 2.4 fixing too and causes a bogus
warning to be displayed on close of audio file handle.

From: Alan Cox <alan@redhat.com>

Type errors, just fixes a warning

From: Alan Cox <alan@redhat.com>

Just a warning fix and behaviour tidy. Changing the kiss.mintime variable isn't
going to work as its exposed to user space

From: jbarnes@sgi.com (Jesse Barnes)

Just a quick patch to fix MAINTAINERS for sn2.

From: Pádraig Brady <P@draigBrady.com>

Watchdog driver for the Winbond w83627hf which is on the last 3 motherboards
I got here for test (tyan, advantech, force).

From: Johannes Stezenbach <js@convergence.de>

the patch below removes warnings like:

  warning: signed and unsigned type in conditional expression

when compiling userspace applications against a glibc built with 2.6 kernel
headers (like on Debian unstable).

From: Jeff Garzik <jgarzik@pobox.com>

I've seen this patch floating around.  Not sure the origin, but it's 
surfaced on lkml and also when I was poking around handhelds.org CVS for
iPAQ patches:  on non-PCs, particularly system-on-chip devices but not
just there, you have a custom "platform bus" that is the root of pretty 
much all other devices and buses.

It's something I wanted to make sure people didn't forget; to make sure 
the legacy_bus didn't get "legacied out of existence."  ;-)

From: Roland McGrath <roland@redhat.com>

I believe I have identified a failure mode that Linus saw a couple weeks
back when tracking down some other fork/exit sorts of races.  We saw this
come up on rare occasions with the RHEL3 kernel's backport of the new code
(while trying to track down other race failure modes we have yet to fix, sigh).

I am talking about the following scenario:

> Btw, even with the fix, doing a "while : ; ./crash t 10 ; done" will
> eventually result in a stuck process:
>
> 	 1415 tty1     D      0:00 ./crash
>
> This is some kind of deadlock: most of the fifty threads are in "D"
> state, with a trace something like
>
> 	 [<c011fbe3>] schedule+0x360/0x7f8
> 	 [<c0120539>] wait_for_completion+0xd4/0x1c3
> 	 [<c0128c9e>] do_exit+0x627/0x6a4
> 	 [<c0128ddd>] do_group_exit+0x3d/0x177
> 	 [<c0130c13>] dequeue_signal+0x2d/0x84
> 	 [<c0133911>] get_signal_to_deliver+0x390/0x575
> 	 [<c010a541>] do_signal+0x6c/0xf1
> 	 [<c01200be>] default_wake_function+0x0/0x12
> 	 [<c01200be>] default_wake_function+0x0/0x12
> 	 [<c013d50f>] do_futex+0x6d/0x7d
> 	 [<c013d635>] sys_futex+0x116/0x12f
> 	 [<c010a601>] do_notify_resume+0x3b/0x3d
> 	 [<c010a82e>] work_notifysig+0x13/0x15
>
> except for one that is trying to core-dump:
>
> 	 [<c0120539>] wait_for_completion+0xd4/0x1c3
> 	 [<c01200be>] default_wake_function+0x0/0x12
> 	 [<c01200be>] default_wake_function+0x0/0x12
> 	 [<c02101aa>] rwsem_wake+0x86/0x12d
> 	 [<c01738af>] coredump_wait+0xa8/0xaa
> 	 [<c0173a26>] do_coredump+0x175/0x26c
>
> and three that are just doing a regular "exit()" system call:
>
> 	 [<c011fbe3>] schedule+0x360/0x7f8
> 	 [<c011e19a>] recalc_task_prio+0x90/0x1aa
> 	 [<c0120539>] wait_for_completion+0xd4/0x1c3
> 	 [<c01200be>] default_wake_function+0x0/0x12
> 	 [<c01200be>] default_wake_function+0x0/0x12
> 	 [<c0210207>] rwsem_wake+0xe3/0x12d
> 	 [<c0128c9e>] do_exit+0x627/0x6a4
> 	 [<c0128d4d>] next_thread+0x0/0x53
> 	 [<c010a7e3>] syscall_call+0x7/0xb
>
> However, the rest of the system is totally unaffected by this deadlock:
> it's only deadlocked withing the thread group itself, nobody else cares.

What happens here is a race between an exiting thread checking
mm->core_waiters in __exit_mm, and the thread taking the core-dump signal
(in coredump_wait) examining the first thread's ->mm pointer and
incrementing mm->core_waiters to account for it.  There is no
synchronization at all in __exit_mm's use of mm->core_waiters.  If the
coredump_wait thread reads tsk->mm when tsk is in __exit_mm between
checking mm->core_waiters and clearing tsk->mm, then it will increment
mm->core_waiters and the total count will later exceed the number of
threads that will ever decrement it and synchronize.  Hence it blocks forever.

The following patch fixes the problem by using mm->mmap_sem in __exit_mm.
The read lock must be held around checking mm->core_waiters and clearing
tsk->mm so that coredump_wait (which gets the write lock) cannot come in
between and do bogus bookkeeping.

From: Dave Olien <dmo@osdl.org>

Here's a patch that changes the DAC960 driver from having one request
queue for ALL disks on the controller, to having a request queue for
each logical disk.  This turns out to make little difference for deadline
scheduler, nor for AS scheduler under light IO load.  But under AS
scheduler with heavy IO, it makes about a 40% difference on dbt2
workload.  Here are the measured numbers:

The 2.6.0-test11-D kernel version includes this mutli-queue patch to the
DAC960 driver.

For non-cached dbt2 workload  (heavy IO load)

Scheduler	kernel/driver	NOTPM(bigger is better)
AS		2.6.0-test11-D  1598
AS		2.6.0-test11     973
deadline	2.6.0-test11    1640
deadline	2.6.0-test11-D  1645

For cached dbt2 workload (lighter IO load)

AS		2.6.0-test11-D  4993
AS		2.6.-test6-mm4  4976, 4890, 4972
deadline	2.6.0-test11-D  4998

Can this be included in 2.6.0?  I know it's not a "critical patch"
in the sense that something won't work without it.  On the other hand,
the change is isolated to a driver.