- 29 Apr, 2016 2 commits
-
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
Indexes should generally be avoided. So we use reg rather than port-id to index ports. Signed-off-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
Because cpld-ctrl-reg property is offset base on cpld-syscon property, we make it as a cell in the cpld-syscon property. Signed-off-by:
-
- 28 Apr, 2016 38 commits
-
-
Mahesh Bandewar authored
When newlink creation fails at device-registration, the port->count is decremented twice. Francesco Ruggeri (fruggeri@arista.com) found this issue in Macvlan and the same exists in IPvlan driver too. While fixing this issue I noticed another issue of missing unregister in case of failure, so adding it to the fix which is similar to the macvlan fix by Francesco in commit 30837960 ("macvlan: fix failure during registration v3") Reported-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
Mahesh Bandewar <maheshb@google.com> CC: Eric Dumazet <edumazet@google.com> CC: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
françois romieu authored
pch_gbe_tx_ring.tx_lock is only used in the hard_xmit handler and in the transmit completion reaper called from NAPI context. Compile-tested only. Potential victims Cced. Someone more knowledgeable may check if pch_gbe_tx_queue could have some use for a mmiowb. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Cress <andy.cress@us.kontron.com> Cc: bryan@fossetcon.org Signed-off-by:
-
Florian Fainelli authored
This patch overloads the DSA master netdev, aka CPU Ethernet MAC to also include switch-side statistics, which is useful for debugging purposes, when the switch is not properly connected to the Ethernet MAC (duplex mismatch, (RG)MII electrical issues etc.). We accomplish this by retaining the original copy of the master netdev's ethtool_ops, and just overload the 3 operations we care about: get_sset_count, get_strings and get_ethtool_stats so as to intercept these calls and call into the original master_netdev ethtool_ops, plus our own. We take this approach as opposed to providing a set of DSA helper functions that would retrive the CPU port's statistics, because the entire purpose of DSA is to allow unmodified Ethernet MAC drivers to be used as CPU conduit interfaces, therefore, statistics overlay in such drivers would simply not scale. The new ethtool -S <iface> output would therefore look like this now: <iface> statistics p<2 digits cpu port number>_<switch MIB counter names> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
TCP prequeue goal is to defer processing of incoming packets to user space thread currently blocked in a recvmsg() system call. Intent is to spend less time processing these packets on behalf of softirq handler, as softirq handler is unfair to normal process scheduler decisions, as it might interrupt threads that do not even use networking. Current prequeue implementation has following issues : 1) It only checks size of the prequeue against sk_rcvbuf It was fine 15 years ago when sk_rcvbuf was in the 64KB vicinity. But we now have ~8MB values to cope with modern networking needs. We have to add sk_rmem_alloc in the equation, since out of order packets can definitely use up to sk_rcvbuf memory themselves. 2) Even with a fixed memory truesize check, prequeue can be filled by thousands of packets. When prequeue needs to be flushed, either from sofirq context (in tcp_prequeue() or timer code), or process context (in tcp_prequeue_process()), this adds a latency spike which is often not desirable. I added a fixed limit of 32 packets, as this translated to a max flush time of 60 us on my test hosts. Also note that all packets in prequeue are not accounted for tcp_mem, since they are not charged against sk_forward_alloc at this point. This is probably not a big deal. Note that this might increase LINUX_MIB_TCPPREQUEUEDROPPED counts, which is misnamed, as packets are not dropped at all, but rather pushed to the stack (where they can be either consumed or dropped) Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Michal Kazior authored
mac80211 (which will be the first user of the fq.h) recently started to support software A-MSDU aggregation. It glues skbuffs together into a single one so the backlog accounting needs to be more fine-grained. To avoid backlog sorting logic duplication split it up for re-use. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Dan Carpenter authored
This is never called with a NULL "buf" and anyway, we dereference 's' on the lines before so it would Oops before we reach the check. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Arnd Bergmann authored
struct mlx5e_channel_param is a large structure that is allocated on the stack of mlx5e_open_channels, and with a recent change it has grown beyond the warning size for the maximum stack that a single function should use: mellanox/mlx5/core/en_main.c: In function 'mlx5e_open_channels': mellanox/mlx5/core/en_main.c:1325:1: error: the frame size of 1072 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] The function is already using dynamic allocation and is not in a fast path, so the easiest workaround is to use another kzalloc for allocating the channel parameters. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: d3c9bc27 ("net/mlx5e: Added ICO SQs") Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jason Wang authored
There's no need to calculate rps hash if it was not enabled. So this patch export rps_needed and check it before trying to get rps hash. Tests (using pktgen to inject packets to guest) shows this can improve pps about 13% (when rps is disabled). Before: ~1150000 pps After: ~1300000 pps Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> ---- Changes from V1: - Fix build when CONFIG_RPS is not set Signed-off-by:
-
David S. Miller authored
Martin KaFai Lau says: ==================== tcp: Make use of MSG_EOR in tcp_sendmsg v4: ~ Do not set eor bit in do_tcp_sendpages() since there is no way to pass MSG_EOR from the userland now. ~ Avoid rmw by testing MSG_EOR first in tcp_sendmsg(). ~ Move TCP_SKB_CB(skb)->eor test to a new helper tcp_skb_can_collapse_to() (suggested by Soheil). ~ Add some packetdrill tests. v3: ~ Separate EOR marking from the SKBTX_ANY_TSTAMP logic. ~ Move the eor bit test back to the loop in tcp_sendmsg and tcp_sendpage because there could be >1 threads doing sendmsg. ~ Thanks to Eric Dumazet's suggestions on v2. ~ The TCP timestamp bug fixes are separated into other threads. v2: ~ Rework based on the recent work "add TX timestamping via cmsg" by Soheil Hassas Yeganeh <soheil.kdev@gmail.com> ~ This version takes the MSG_EOR bit as a signal of end-of-response-message and leave the selective timestamping job to the cmsg ~ Changes based on the v1 feedback (like avoid unlikely check in a loop and adding tcp_sendpage support) ~ The first 3 patches are bug fixes. The fixes in this series depend on the newly introduced txstamp_ack in net-next. I will make relevant patches against net after getting some feedback. ~ The test results are based on the recently posted net fix: "tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acks" One potential use case is to use MSG_EOR with SOF_TIMESTAMPING_TX_ACK to get a more accurate TCP ack timestamping on application protocol with multiple outgoing response messages (e.g. HTTP2). One of our use case is at the webserver. The webserver tracks the HTTP2 response latency by measuring when the webserver sends the first byte to the socket till the TCP ACK of the last byte is received. In the cases where we don't have client side measurement, measuring from the server side is the only option. In the cases we have the client side measurement, the server side data can also be used to justify/cross-check-with the client side data. ==================== Signed-off-by: -
Martin KaFai Lau authored
When fragmenting a skb, the next_skb should carry the eor from prev_skb. The eor of prev_skb should also be reset. Packetdrill script for testing: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 sendto(4, ..., 15330, MSG_EOR, ..., ...) = 15330 0.200 sendto(4, ..., 730, 0, ..., ...) = 730 0.200 > . 1:7301(7300) ack 1 0.200 > . 7301:14601(7300) ack 1 0.300 < . 1:1(0) ack 14601 win 257 0.300 > P. 14601:15331(730) ack 1 0.300 > P. 15331:16061(730) ack 1 0.400 < . 1:1(0) ack 16061 win 257 0.400 close(4) = 0 0.400 > F. 16061:16061(0) ack 1 0.400 < F. 1:1(0) ack 16062 win 257 0.400 > . 16062:16062(0) ack 2 Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Martin KaFai Lau authored
This patch: 1. Prevent next_skb from coalescing to the prev_skb if TCP_SKB_CB(prev_skb)->eor is set 2. Update the TCP_SKB_CB(prev_skb)->eor if coalescing is allowed Packetdrill script for testing: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 sendto(4, ..., 730, MSG_EOR, ..., ...) = 730 0.200 sendto(4, ..., 730, MSG_EOR, ..., ...) = 730 0.200 write(4, ..., 11680) = 11680 0.200 > P. 1:731(730) ack 1 0.200 > P. 731:1461(730) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:13141(4380) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:13141,nop,nop> 0.300 > P. 1:731(730) ack 1 0.300 > P. 731:1461(730) ack 1 0.400 < . 1:1(0) ack 13141 win 257 0.400 close(4) = 0 0.400 > F. 13141:13141(0) ack 1 0.500 < F. 1:1(0) ack 13142 win 257 0.500 > . 13142:13142(0) ack 2 Signed-off-by:
-
Martin KaFai Lau authored
This patch adds an eor bit to the TCP_SKB_CB. When MSG_EOR is passed to tcp_sendmsg, the eor bit will be set at the skb containing the last byte of the userland's msg. The eor bit will prevent data from appending to that skb in the future. The change in do_tcp_sendpages is to honor the eor set during the previous tcp_sendmsg(MSG_EOR) call. This patch handles the tcp_sendmsg case. The followup patches will handle other skb coalescing and fragment cases. One potential use case is to use MSG_EOR with SOF_TIMESTAMPING_TX_ACK to get a more accurate TCP ack timestamping on application protocol with multiple outgoing response messages (e.g. HTTP2). Packetdrill script for testing: ~~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 14600) = 14600 0.200 sendto(4, ..., 730, MSG_EOR, ..., ...) = 730 0.200 sendto(4, ..., 730, MSG_EOR, ..., ...) = 730 0.200 > . 1:7301(7300) ack 1 0.200 > P. 7301:14601(7300) ack 1 0.300 < . 1:1(0) ack 14601 win 257 0.300 > P. 14601:15331(730) ack 1 0.300 > P. 15331:16061(730) ack 1 0.400 < . 1:1(0) ack 16061 win 257 0.400 close(4) = 0 0.400 > F. 16061:16061(0) ack 1 0.400 < F. 1:1(0) ack 16062 win 257 0.400 > . 16062:16062(0) ack 2 Signed-off-by:
-
David S. Miller authored
Soheil Hassas Yeganeh says: ==================== tcp: simplify ack tx timestamps v2: - Fully remove SKBTX_ACK_TSTAMP, as suggested by Willem de Bruijn. This patch series aims at removing redundant checks and fields for ack timestamps for TCP. ==================== Signed-off-by: -
Soheil Hassas Yeganeh authored
The SKBTX_ACK_TSTAMP flag is set in skb_shinfo->tx_flags when the timestamp of the TCP acknowledgement should be reported on error queue. Since accessing skb_shinfo is likely to incur a cache-line miss at the time of receiving the ack, the txstamp_ack bit was added in tcp_skb_cb, which is set iff the SKBTX_ACK_TSTAMP flag is set for an skb. This makes SKBTX_ACK_TSTAMP flag redundant. Remove the SKBTX_ACK_TSTAMP and instead use the txstamp_ack bit everywhere. Note that this frees one bit in shinfo->tx_flags. Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
-
Soheil Hassas Yeganeh authored
Remove the redundant check for sk->sk_tsflags in tcp_tx_timestamp. tcp_tx_timestamp() receives the tsflags as a parameter. As a result the "sk->sk_tsflags || tsflags" is redundant, since tsflags already includes sk->sk_tsflags plus overrides from control messages. Signed-off-by:
-
Eric Dumazet authored
I accidentally replaced BH disabling by preemption disabling in SNMP_ADD_STATS64() and SNMP_UPD_PO_STATS64() on 32bit builds. For 64bit stats on 32bit arch, we really need to disable BH, since the "struct u64_stats_sync syncp" might be manipulated both from process and BH contexts. Fixes: 6aef70a8 ("net: snmp: kill various STATS_USER() helpers") Reported-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net: avoid some atomic ops when FASYNC is not used We can avoid some atomic operations on sockets not using FASYNC ==================== Signed-off-by: -
Eric Dumazet authored
SOCKWQ_ASYNC_WAITDATA is set/cleared in sk_wait_data() and equivalent functions, so that sock_wake_async() can send a SIGIO only when necessary. Since these atomic operations are really not needed unless socket expressed interest in FASYNC, we can omit them in most cases. Signed-off-by:
-
Eric Dumazet authored
SOCKWQ_ASYNC_NOSPACE is tested in sock_wake_async() so that a SIGIO signal is sent when needed. tcp_sendmsg() clears the bit. tcp_poll() sets the bit when stream is not writeable. We can avoid two atomic operations by first checking if socket is actually interested in the FASYNC business (most sockets in real applications do not use AIO, but select()/poll()/epoll()) This also removes one cache line miss to access sk->sk_wq->flags in tcp_sendmsg() Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net: snmp: update SNMP methods In the old days (before linux-3.0), SNMP counters were duplicated, one set for user context, and anther one for BH context. After commit 8f0ea0fe ("snmp: reduce percpu needs by 50%") we have a single copy, and what really matters is preemption being enabled or disabled, since we use this_cpu_inc() or __this_cpu_inc() respectively. This patch series kills the obsolete STATS_USER() helpers, and rename all XXX_BH() helpers to __XXX() ones, to more closely match conventions used to update per cpu variables. This is probably going to hurt maintainers job for a while, since cherry-picks will not be clean, but this had to be cleaned at one point. I am so sorry guys. ==================== Signed-off-by:
-
Eric Dumazet authored
There is nothing related to BH in SNMP counters anymore, since linux-3.0. Rename helpers to use __ prefix instead of _BH prefix, for contexts where preemption is disabled. This more closely matches convention used to update percpu variables. Signed-off-by:
-
Eric Dumazet authored
IPv6 ICMP stats are atomics anyway. Signed-off-by:
-
Eric Dumazet authored
Rename IP6_UPD_PO_STATS_BH() to __IP6_UPD_PO_STATS() Signed-off-by:
-
Eric Dumazet authored
Rename IP6_INC_STATS_BH() to __IP6_INC_STATS() and IP6_ADD_STATS_BH() to __IP6_ADD_STATS() Signed-off-by:
-
Eric Dumazet authored
Rename NET_INC_STATS_BH() to __NET_INC_STATS() and NET_ADD_STATS_BH() to __NET_ADD_STATS() Signed-off-by:
-
Eric Dumazet authored
Rename IP_UPD_PO_STATS_BH() to __IP_UPD_PO_STATS() Signed-off-by:
-
Eric Dumazet authored
Rename IP_ADD_STATS_BH() to __IP_ADD_STATS() Signed-off-by:
-
Eric Dumazet authored
Rename ICMP6_INC_STATS_BH() to __ICMP6_INC_STATS() Signed-off-by:
-
Eric Dumazet authored
Rename IP_INC_STATS_BH() to __IP_INC_STATS(), to better express this is used in non preemptible context. Signed-off-by:
-
Eric Dumazet authored
Rename SCTP_INC_STATS_BH() to __SCTP_INC_STATS() Signed-off-by:
-
Eric Dumazet authored
Remove misleading _BH suffix. Signed-off-by:
-
Eric Dumazet authored
Rename TCP_INC_STATS_BH() to __TCP_INC_STATS() Signed-off-by:
-
Eric Dumazet authored
Not used anymore. Signed-off-by:
-
Eric Dumazet authored
Rename UDP_INC_STATS_BH() to __UDP_INC_STATS(), and UDP6_INC_STATS_BH() to __UDP6_INC_STATS() Signed-off-by:
-
Eric Dumazet authored
Rename ICMP_INC_STATS_BH() to __ICMP_INC_STATS() Signed-off-by:
-
Eric Dumazet authored
Rename DCCP_INC_STATS_BH() to __DCCP_INC_STATS() Signed-off-by:
-
Eric Dumazet authored
In the old days (before linux-3.0), SNMP counters were duplicated, one for user context, and one for BH context. After commit 8f0ea0fe ("snmp: reduce percpu needs by 50%") we have a single copy, and what really matters is preemption being enabled or disabled, since we use this_cpu_inc() or __this_cpu_inc() respectively. We therefore kill SNMP_INC_STATS_USER(), SNMP_ADD_STATS_USER(), NET_INC_STATS_USER(), NET_ADD_STATS_USER(), SCTP_INC_STATS_USER(), SNMP_INC_STATS64_USER(), SNMP_ADD_STATS64_USER(), TCP_ADD_STATS_USER(), UDP_INC_STATS_USER(), UDP6_INC_STATS_USER(), and XFRM_INC_STATS_USER() Following patches will rename __BH helpers to make clear their usage is not tied to BH being disabled. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-04-27 This series contains updates to i40e and i40evf. Alex Duyck cleans up the feature flags since they are becoming pretty "massive", the primary change being that we now build our features list around hw_encap_features. Added support for IPIP and SIT offloads, which should improvement in throughput for IPIP and SIT tunnels with the offload enabled. Mitch adds support for configuring RSS on behalf of the VFs, which removes the burden of dealing with different hardware interfaces from the VF drivers and improves future compatibility. Fix to ensure that we do not panic by checking that the vsi_res pointer is valid before dereferencing it, after which we can drink beer and eat peanuts. Shannon does come housekeeping in i40e_add_fdir_ethtool() in preparation for more cloud filter work. Added flexibility to the nvmupdate facility by adding the ability to specify an AQ event opcode to wait on after Exec_AQ request. Michal adds device capability which defines if an update is available and if a security check is needed during the update process. Kamil just adds a device id to support X722 QSFP+ device. Greg fixes an issue where a mirror rule ID may be zero, so do not return invalid parameter when the user passes in a zero for a rule ID. Adds support to steer packets to VSIs by VLAN tag alone while being in promiscuous mode for multicast and unicast MAC addresses. Jesse fixes the driver from offloading the VLAN tag into the skb any time there was a VLAN tag and the hardware stripping was enabled, to making sure it is enabled before put_tag. v2: Dropped patch 8 ("i40e: Allow user to change input set mask for flow director") while Kiran reworks a more generalized solution based on feedback from David Miller. ==================== Signed-off-by:
-
