Pull MD update from Shaohua Li:

 - fixed deadlock in MD suspend and a potential bug in bio allocation
   (Neil Brown)

 - fixed signal issue (Mikulas Patocka)

 - fixed typo in FailFast test (Guoqing Jiang)

 - other trival fixes

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  MD: fix sleep in atomic
  MD: fix a null dereference
  md: use a separate bio_set for synchronous IO.
  md: change the initialization value for a spare device spot to MD_DISK_ROLE_SPARE
  md/raid1: remove unused bio in sync_request_write
  md/raid10: fix FailFast test for wrong device
  md: don't use flush_signals in userspace processes
  md: fix deadlock between mddev_suspend() and md_write_start()

Pull input updates from Dmitry Torokhov:

 - a new driver for STM FingerTip touchscreen

 - a new driver for D-Link DIR-685 touch keys

 - updated list of supported devices in xpad driver

 - other assorted updates and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits)
  MAINTAINERS: update input subsystem patterns
  Input: introduce KEY_ASSISTANT
  Input: xpad - sync supported devices with XBCD
  Input: xpad - sync supported devices with 360Controller
  Input: xen-kbdfront - use string constants from PV protocol
  Input: stmfts - mark all PM functions as __maybe_unused
  Input: add support for the STMicroelectronics FingerTip touchscreen
  Input: add D-Link DIR-685 touchkeys driver
  Input: s3c2410_ts - handle return value of clk_prepare_enable
  Input: axp20x-pek - add wakeup support
  Input: synaptics-rmi4 - use %phN to form F34 configuration ID
  Input: synaptics-rmi4 - change a char type to u8
  Input: sparse-keymap - remove sparse_keymap_free()
  Input: tsc2007 - move header file out of I2C realm
  Input: mms114 - move header file out of I2C realm
  Input: mcs - move header file out of I2C realm
  Input: lm8323 - move header file out of I2C realm
  Input: elantech - force relative mode on a certain module
  Input: elan_i2c - add support for fetching chip type on newer hardware
  Input: elan_i2c - check if device is there before really probing
  ...

Pull dmaengine updates from Vinod Koul:

 - removal of AVR32 support in dw driver as AVR32 is gone

 - new driver for Broadcom stream buffer accelerator (SBA) RAID driver

 - add support for Faraday Technology FTDMAC020 in amba-pl08x driver

 - IOMMU support in pl330 driver

 - updates to bunch of drivers

* tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
  dmaengine: qcom_hidma: correct API violation for submit
  dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy
  dmaengine: tegra-apb: Really fix runtime-pm usage
  dmaengine: fsl_raid: make of_device_ids const.
  dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden
  dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly
  dmaengine: Kconfig: Simplify the help text for MXS_DMA
  dmaengine: pl330: Delete unused functions
  dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once()
  dmaengine: Kconfig: Extend the dependency for MXS_DMA
  dmaengine: mxs: Use %zu for printing a size_t variable
  dmaengine: ste_dma40: Cleanup scatterlist layering violations
  dmaengine: imx-dma: cleanup scatterlist layering violations
  dmaengine: use proper name for the R-Car SoC
  dmaengine: imx-sdma: Fix compilation warning.
  dmaengine: imx-sdma: Handle return value of clk_prepare_enable
  dmaengine: pl330: Add IOMMU support to slave tranfers
  dmaengine: DW DMAC: Handle return value of clk_prepare_enable
  dmaengine: pl08x: use GENMASK() to create bitmasks
  dmaengine: pl08x: Add support for Faraday Technology FTDMAC020
  ...

Pull ARM updates from Russell King:

 - add support for ftrace-with-registers, which is needed for kgraft and
   other ftrace tools

 - support for mremap() for the sigpage/vDSO so that checkpoint/restore
   can work

 - add timestamps to each line of the register dump output

 - remove the unused KTHREAD_SIZE from nommu

 - align the ARM bitops APIs with the generic API (using unsigned long
   pointers rather than void pointers)

 - make the configuration of userspace Thumb support an expert option so
   that we can default it on, and avoid some hard to debug userspace
   crashes

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8684/1: NOMMU: Remove unused KTHREAD_SIZE definition
  ARM: 8683/1: ARM32: Support mremap() for sigpage/vDSO
  ARM: 8679/1: bitops: Align prototypes to generic API
  ARM: 8678/1: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS
  ARM: make configuration of userspace Thumb support an expert option
  ARM: 8673/1: Fix __show_regs output timestamps

Pull sparc updates from David Miller:

 1) Queued spinlocks and rwlocks for sparc64, from Babu Moger.

 2) Some const'ification from Arvind Yadav.

 3) LDC/VIO driver infrastructure changes to facilitate future upcoming
    drivers, from Jag Raman.

 4) Initialize sched_clock() et al. early so that the initial printk
    timestamps are all done while the implementation is available and
    functioning. From Pavel Tatashin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (38 commits)
  sparc: kernel: pmc: make of_device_ids const.
  sparc64: fix typo in property
  sparc64: add port_id to VIO device metadata
  sparc64: Enhance search for VIO device in MDESC
  sparc64: enhance VIO device probing
  sparc64: check if a client is allowed to register for MDESC notifications
  sparc64: remove restriction on VIO device name size
  sparc64: refactor code to obtain cfg_handle property from MDESC
  sparc64: add MDESC node name property to VIO device metadata
  sparc64: mdesc: use __GFP_REPEAT action modifier for VM allocation
  sparc64: expand MDESC interface
  sparc64: skip handshake for LDC channels in RAW mode
  sparc64: specify the device class in VIO version info. packet
  sparc64: ensure VIO operations are defined while being used
  sparc: kernel: apc: make of_device_ids const
  sparc/time: make of_device_ids const
  sparc64: broken %tick frequency on spitfire cpus
  sparc64: use prom interface to get %stick frequency
  sparc64: optimize functions that access tick
  sparc64: add hot-patched and inlined get_tick()
  ...

Pull networking fixes from David Miller:
 "Mostly fixing some light fallout from the changes that went into the
  merge window.

   1) Fix memory leaks on network namespace teardown in netfilter, from
      Liping Zhang.

   2) When comparing ipv6 nexthops, we have to take the lightweight
      tunnel state into account as well. From David Ahern.

   3) Fix socket option object length check in the new TLS code, from
      Matthias Rosenfelder.

   4) Fix memory leak in nfp driver flower support, from Jakub Kicinski.

   5) Several netlink attribute validation fixes in cfg80211, from
      Srinivas Dasari.

   6) Fix context array leak in virtio_net, from Jason Wang.

   7) SKB use after free in hns driver, from Yusheng Lin.

   8) Fix socket leak on accept() in RDS, from Sowmini Varadhan. Also
      add a WARN_ON() to sock_graft() so other protocol stacks don't
      trip over this as well"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  net: ethernet: mediatek: remove useless code in mtk_probe()
  mpls: fix uninitialized in_label var warning in mpls_getroute
  doc: SKB_GSO_[IPIP|SIT] have been replaced
  bonding: avoid NETDEV_CHANGEMTU event when unregistering slave
  net/sock: add WARN_ON(parent->sk) in sock_graft()
  rds: tcp: use sock_create_lite() to create the accept socket
  net: hns: Fix a skb used after free bug
  net: hns: Fix a wrong op phy C45 code
  net: macb: Adding Support for Jumbo Frames up to 10240 Bytes in SAMA5D3
  net: Update networking MAINTAINERS entry.
  virtio-net: fix leaking of ctx array
  cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES
  cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE
  cfg80211: Check if NAN service ID is of expected size
  cfg80211: Check if PMKID attribute is of expected size
  arcnet: com20020-pci: Fix an error handling path in 'com20020pci_probe()'
  nfp: flower: add missing clean up call to avoid memory leaks
  vrf: fix bug_on triggered by rx when destroying a vrf
  ptp: dte: Use LL suffix for 64-bit constants
  sctp: set the value of flowi6_oif to sk_bound_dev_if to make sctp_v6_get_dst to find the correct route entry.
  ...

Pull misc filesystem updates from Al Viro:
 "Assorted normal VFS / filesystems stuff..."

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  dentry name snapshots
  Make statfs properly return read-only state after emergency remount
  fs/dcache: init in_lookup_hashtable
  minix: Deinline get_block, save 2691 bytes
  fs: Reorder inode_owner_or_capable() to avoid needless
  fs: warn in case userspace lied about modprobe return

Pull spi uaccess delousing from Al Viro:
 "Getting rid of pointless __get_user() and friends in drivers/spi.

  [ the only reason it's on a separate branch is that I hoped it would
    be picked by spi folks; looks like mail asking them to grab it got
    lost and I hadn't followed up on that ]"

* 'for-spi' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  spidev: quit messing with access_ok()

Pull __copy_in_user removal from Al Viro:
 "There used to be 6 places in the entire tree calling __copy_in_user(),
  all of them bogus.

  Four got killed off in work.drm branch, this takes care of the
  remaining ones and kills the definition of that sucker"

* 'work.__copy_in_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kill __copy_in_user()
  sanitize do_i2c_smbus_ioctl()

Remove useless local variables _match_, _soc_ and the code related.

Notice that

const struct of_device_id of_mtk_match[] = {
        { .compatible = "mediatek,mt2701-eth" },
        {},
};

So match->data is NULL.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the below warning generated by static checker:
    net/mpls/af_mpls.c:2111 mpls_getroute()
    error: uninitialized symbol 'in_label'."

Fixes: 397fc9e5 ("mpls: route get support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Those enum values don't exist anymore.

Fixes: 7e13318d ("net: define gso types for IPx over IPv4 and IPv6")
CC: Tom Herbert <tom@herbertland.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As Hongjun/Nicolas summarized in their original patch:

"
When a device changes from one netns to another, it's first unregistered,
then the netns reference is updated and the dev is registered in the new
netns. Thus, when a slave moves to another netns, it is first
unregistered. This triggers a NETDEV_UNREGISTER event which is caught by
the bonding driver. The driver calls bond_release(), which calls
dev_set_mtu() and thus triggers NETDEV_CHANGEMTU (the device is still in
the old netns).
"

This is a very special case, because the device is being unregistered
no one should still care about the NETDEV_CHANGEMTU event triggered
at this point, we can avoid broadcasting this event on this path,
and avoid touching inetdev_event()/addrconf_notify() path.

It requires to export __dev_set_mtu() to bonding driver.
Reported-by: Hongjun Li <hongjun.li@6wind.com>
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sowmini Varadhan says:

====================
rds-tcp: sock_graft() leak

Following up on the discussion at
  https://www.spinics.net/lists/netdev/msg442859.html
- make rds_tcp_accept_one() call sock_create_lite()
- add a WARN_ON() to sock_graft()

Tested by running an infinite while() loop that does
(module-load; rds-stress; module-unload) and monitors
TCP slabinfo while the test is running.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

sock_graft() unilaterally sets up parent->sk based on the
assumption that the existing parent->sk is null. If this
condition is not true, then the existing parent->sk would
be leaked, so add a WARN_ON() to alert callers who may fall
in this category.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two problems with calling sock_create_kern() from
rds_tcp_accept_one()
1. it sets up a new_sock->sk that is wasteful, because this ->sk
   is going to get replaced by inet_accept() in the subsequent ->accept()
2. The new_sock->sk is a leaked reference in sock_graft() which
   expects to find a null parent->sk

Avoid these problems by calling sock_create_lite().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lin Yun Sheng says:

====================
Bugfixs for hns ethernet driver

This patchset fix skb used after free and C45 op code issues
in hns driver.

Patch V2:
	1. Remove ndev->feature checking in TX description patch.
	2. Add Fixes: Tag in patch description.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

skb maybe freed in hns_nic_net_xmit_hw() and return NETDEV_TX_OK,
which cause hns_nic_net_xmit to use a freed skb.

BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x62c/0x940...
	[17659.112635]      alloc_debug_processing+0x18c/0x1a0
	[17659.117208]      __slab_alloc+0x52c/0x560
	[17659.120909]      kmem_cache_alloc_node+0xac/0x2c0
	[17659.125309]      __alloc_skb+0x6c/0x260
	[17659.128837]      tcp_send_ack+0x8c/0x280
	[17659.132449]      __tcp_ack_snd_check+0x9c/0xf0
	[17659.136587]      tcp_rcv_established+0x5a4/0xa70
	[17659.140899]      tcp_v4_do_rcv+0x27c/0x620
	[17659.144687]      tcp_prequeue_process+0x108/0x170
	[17659.149085]      tcp_recvmsg+0x940/0x1020
	[17659.152787]      inet_recvmsg+0x124/0x180
	[17659.156488]      sock_recvmsg+0x64/0x80
	[17659.160012]      SyS_recvfrom+0xd8/0x180
	[17659.163626]      __sys_trace_return+0x0/0x4
	[17659.167506] INFO: Freed in kfree_skbmem+0xa0/0xb0 age=23 cpu=1 pid=13
	[17659.174000]      free_debug_processing+0x1d4/0x2c0
	[17659.178486]      __slab_free+0x240/0x390
	[17659.182100]      kmem_cache_free+0x24c/0x270
	[17659.186062]      kfree_skbmem+0xa0/0xb0
	[17659.189587]      __kfree_skb+0x28/0x40
	[17659.193025]      napi_gro_receive+0x168/0x1c0
	[17659.197074]      hns_nic_rx_up_pro+0x58/0x90
	[17659.201038]      hns_nic_rx_poll_one+0x518/0xbc0
	[17659.205352]      hns_nic_common_poll+0x94/0x140
	[17659.209576]      net_rx_action+0x458/0x5e0
	[17659.213363]      __do_softirq+0x1b8/0x480
	[17659.217062]      run_ksoftirqd+0x64/0x80
	[17659.220679]      smpboot_thread_fn+0x224/0x310
	[17659.224821]      kthread+0x150/0x170
	[17659.228084]      ret_from_fork+0x10/0x40

	BUG: KASAN: use-after-free in hns_nic_net_xmit+0x8c/0xc0...
	[17751.080490]      __slab_alloc+0x52c/0x560
	[17751.084188]      kmem_cache_alloc+0x244/0x280
	[17751.088238]      __build_skb+0x40/0x150
	[17751.091764]      build_skb+0x28/0x100
	[17751.095115]      __alloc_rx_skb+0x94/0x150
	[17751.098900]      __napi_alloc_skb+0x34/0x90
	[17751.102776]      hns_nic_rx_poll_one+0x180/0xbc0
	[17751.107097]      hns_nic_common_poll+0x94/0x140
	[17751.111333]      net_rx_action+0x458/0x5e0
	[17751.115123]      __do_softirq+0x1b8/0x480
	[17751.118823]      run_ksoftirqd+0x64/0x80
	[17751.122437]      smpboot_thread_fn+0x224/0x310
	[17751.126575]      kthread+0x150/0x170
	[17751.129838]      ret_from_fork+0x10/0x40
	[17751.133454] INFO: Freed in kfree_skbmem+0xa0/0xb0 age=19 cpu=7 pid=43
	[17751.139951]      free_debug_processing+0x1d4/0x2c0
	[17751.144436]      __slab_free+0x240/0x390
	[17751.148051]      kmem_cache_free+0x24c/0x270
	[17751.152014]      kfree_skbmem+0xa0/0xb0
	[17751.155543]      __kfree_skb+0x28/0x40
	[17751.159022]      napi_gro_receive+0x168/0x1c0
	[17751.163074]      hns_nic_rx_up_pro+0x58/0x90
	[17751.167041]      hns_nic_rx_poll_one+0x518/0xbc0
	[17751.171358]      hns_nic_common_poll+0x94/0x140
	[17751.175585]      net_rx_action+0x458/0x5e0
	[17751.179373]      __do_softirq+0x1b8/0x480
	[17751.183076]      run_ksoftirqd+0x64/0x80
	[17751.186691]      smpboot_thread_fn+0x224/0x310
	[17751.190826]      kthread+0x150/0x170
	[17751.194093]      ret_from_fork+0x10/0x40

Fixes: 13ac695e ("net:hns: Add support of Hip06 SoC to the Hislicon Network Subsystem")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Reported-by: Jun He <hjat2005@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the user manual described, the second step to write to C45 phy
by mdio should be data, but not address. Here we should fix this
issue.

Fixes: 5b904d39 ("net: add Hisilicon Network Subsystem MDIO support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As per the SAMA5D3 device specification it supports Jumbo frames.
But the suggested flag and length of bytes it supports was not updated
in this driver config_structure.
The maximum jumbo frames the device supports :
10240 bytes as per the device spec.

While changing the MTU value greater than 1500, it threw error:
sudo ifconfig eth1 mtu 9000
SIOCSIFMTU: Invalid argument

Add this support to driver so that it works as expected and designed.
Signed-off-by: vishnuvardhan <vardhanraj4143@gmail.com>
[nicolas.ferre@microchip.com: modify slightly commit msg]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull read/write fix from Al Viro:
 "file_start_write()/file_end_write() got mixed into vfs_iter_write() by
  accident; that's a deadlock for all existing callers - they already do
  that, some - quite a bit outside.

  Easily fixed, fortunately"

* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  move file_{start,end}_write() out of do_iter_write()

Pull iov_iter hardening from Al Viro:
 "This is the iov_iter/uaccess/hardening pile.

  For one thing, it trims the inline part of copy_to_user/copy_from_user
  to the minimum that *does* need to be inlined - object size checks,
  basically. For another, it sanitizes the checks for iov_iter
  primitives. There are 4 groups of checks: access_ok(), might_fault(),
  object size and KASAN.

   - access_ok() had been verified by whoever had set the iov_iter up.
     However, that has happened in a function far away, so proving that
     there's no path to actual copying bypassing those checks is hard
     and proving that iov_iter has not been buggered in the meanwhile is
     also not pleasant. So we want those redone in actual
     copyin/copyout.

   - might_fault() is better off consolidated - we know whether it needs
     to be checked as soon as we enter iov_iter primitive and observe
     the iov_iter flavour. No need to wait until the copyin/copyout. The
     call chains are short enough to make sure we won't miss anything -
     in fact, it's more robust that way, since there are cases where we
     do e.g. forced fault-in before getting to copyin/copyout. It's not
     quite what we need to check (in particular, combination of
     iovec-backed and set_fs(KERNEL_DS) is almost certainly a bug, not a
     cause to skip checks), but that's for later series. For now let's
     keep might_fault().

   - KASAN checks belong in copyin/copyout - at the same level where
     other iov_iter flavours would've hit them in memcpy().

   - object size checks should apply to *all* iov_iter flavours, not
     just iovec-backed ones.

  There are two groups of primitives - one gets the kernel object
  described as pointer + size (copy_to_iter(), etc.) while another gets
  it as page + offset + size (copy_page_to_iter(), etc.)

  For the first group the checks are best done where we actually have a
  chance to find the object size. In other words, those belong in inline
  wrappers in uio.h, before calling into iov_iter.c. Same kind as we
  have for inlined part of copy_to_user().

  For the second group there is no object to look at - offset in page is
  just a number, it bears no type information. So we do them in the
  common helper called by iov_iter.c primitives of that kind. All it
  currently does is checking that we are not trying to access outside of
  the compound page; eventually we might want to add some sanity checks
  on the page involved.

  So the things we need in copyin/copyout part of iov_iter.c do not
  quite match anything in uaccess.h (we want no zeroing, we *do* want
  access_ok() and KASAN and we want no might_fault() or object size
  checks done on that level). OTOH, these needs are simple enough to
  provide a couple of helpers (static in iov_iter.c) doing just what we
  need..."

* 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  iov_iter: saner checks on copyin/copyout
  iov_iter: sanity checks for copy to/from page primitives
  iov_iter/hardening: move object size checks to inlined part
  copy_{to,from}_user(): consolidate object size checks
  copy_{from,to}_user(): move kasan checks and might_fault() out-of-line

To avoid pathological stack usage or the need to special-case setuid
execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Writeback error handling updates from Jeff Layton:
 "This pile represents the bulk of the writeback error handling fixes
  that I have for this cycle. Some of the earlier patches in this pile
  may look trivial but they are prerequisites for later patches in the
  series.

  The aim of this set is to improve how we track and report writeback
  errors to userland. Most applications that care about data integrity
  will periodically call fsync/fdatasync/msync to ensure that their
  writes have made it to the backing store.

  For a very long time, we have tracked writeback errors using two flags
  in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
  writeback error occurs (via mapping_set_error) and are cleared as a
  side-effect of filemap_check_errors (as you noted yesterday). This
  model really sucks for userland.

  Only the first task to call fsync (or msync or fdatasync) will see the
  error. Any subsequent task calling fsync on a file will get back 0
  (unless another writeback error occurs in the interim). If I have
  several tasks writing to a file and calling fsync to ensure that their
  writes got stored, then I need to have them coordinate with one
  another. That's difficult enough, but in a world of containerized
  setups that coordination may even not be possible.

  But wait...it gets worse!

  The calls to filemap_check_errors can be buried pretty far down in the
  call stack, and there are internal callers of filemap_write_and_wait
  and the like that also end up clearing those errors. Many of those
  callers ignore the error return from that function or return it to
  userland at nonsensical times (e.g. truncate() or stat()). If I get
  back -EIO on a truncate, there is no reason to think that it was
  because some previous writeback failed, and a subsequent fsync() will
  (incorrectly) return 0.

  This pile aims to do three things:

   1) ensure that when a writeback error occurs that that error will be
      reported to userland on a subsequent fsync/fdatasync/msync call,
      regardless of what internal callers are doing

   2) report writeback errors on all file descriptions that were open at
      the time that the error occurred. This is a user-visible change,
      but I think most applications are written to assume this behavior
      anyway. Those that aren't are unlikely to be hurt by it.

   3) document what filesystems should do when there is a writeback
      error. Today, there is very little consistency between them, and a
      lot of cargo-cult copying. We need to make it very clear what
      filesystems should do in this situation.

  To achieve this, the set adds a new data type (errseq_t) and then
  builds new writeback error tracking infrastructure around that. Once
  all of that is in place, we change the filesystems to use the new
  infrastructure for reporting wb errors to userland.

  Note that this is just the initial foray into cleaning up this mess.
  There is a lot of work remaining here:

   1) convert the rest of the filesystems in a similar fashion. Once the
      initial set is in, then I think most other fs' will be fairly
      simple to convert. Hopefully most of those can in via individual
      filesystem trees.

   2) convert internal waiters on writeback to use errseq_t for
      detecting errors instead of relying on the AS_* flags. I have some
      draft patches for this for ext4, but they are not quite ready for
      prime time yet.

  This was a discussion topic this year at LSF/MM too. If you're
  interested in the gory details, LWN has some good articles about this:

      https://lwn.net/Articles/718734/
      https://lwn.net/Articles/724307/"

* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  btrfs: minimal conversion to errseq_t writeback error reporting on fsync
  xfs: minimal conversion to errseq_t writeback error reporting
  ext4: use errseq_t based error handling for reporting data writeback errors
  fs: convert __generic_file_fsync to use errseq_t based reporting
  block: convert to errseq_t based writeback error tracking
  dax: set errors in mapping when writeback fails
  Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
  mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
  fs: new infrastructure for writeback error handling and reporting
  lib: add errseq_t type and infrastructure for handling it
  mm: don't TestClearPageError in __filemap_fdatawait_range
  mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
  jbd2: don't clear and reset errors after waiting on writeback
  buffer: set errors in mapping at the time that the error occurs
  fs: check for writeback errors after syncing out buffers in generic_file_fsync
  buffer: use mapping_set_error instead of setting the flag
  mm: fix mapping_set_error call in me_pagecache_dirty

Pull Writeback error handling fixes from Jeff Layton:
 "The main rationale for all of these changes is to tighten up writeback
  error reporting to userland. There are many ways now that writeback
  errors can be lost, such that fsync/fdatasync/msync return 0 when
  writeback actually failed.

  This pile contains a small set of cleanups and writeback error
  handling fixes that I was able to break off from the main pile (#2).

  Two of the patches in this pile are trivial. The exceptions are the
  patch to fix up error handling in write_one_page, and the patch to
  make JFS pay attention to write_one_page errors"

* tag 'for-linus-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fs: remove call_fsync helper function
  mm: clean up error handling in write_one_page
  JFS: do not ignore return code from write_one_page()
  mm: drop "wait" parameter from write_one_page()

Pull cifs fixes from Steve French:
 "First set of CIFS/SMB3 fixes for the merge window. Also improves POSIX
  character mapping for SMB3"

* tag 'cifs-bug-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: fix circular locking dependency
  cifs: set oparms.create_options rather than or'ing in CREATE_OPEN_BACKUP_INTENT
  cifs: Do not modify mid entry after submitting I/O in cifs_call_async
  CIFS: add SFM mapping for 0x01-0x1F
  cifs: hide unused functions
  cifs: Use smb 2 - 3 and cifsacl mount options getacl functions
  cifs: prototype declaration and definition for smb 2 - 3 and cifsacl mount options
  CIFS: add CONFIG_CIFS_DEBUG_KEYS to dump encryption keys
  cifs: set mapping error when page writeback fails in writepage or launder_pages
  SMB3: Enable encryption for SMB3.1.1

Merge tag 'gfs2-4.13.fixes.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull GFS2 fix from Bob Peterson:
 "Sorry for the additional merge request, but Andreas discovered this
  problem soon after you processed our last gfs2 merge.

  This fixes a regression introduced by a patch we did in mid-2015
  (commit 88ffbf3e: "GFS2: Use resizable hash table for glocks"), so
  best to get it fixed. Some code was reverted that should not have
  been.

  The patch from Andreas Gruenbacher just re-adds code that had been
  there originally"

* tag 'gfs2-4.13.fixes.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix glock rhashtable rcu bug

take_dentry_name_snapshot() takes a safe snapshot of dentry name;
if the name is a short one, it gets copied into caller-supplied
structure, otherwise an extra reference to external name is grabbed
(those are never modified).  In either case the pointer to stable
string is stored into the same structure.

dentry must be held by the caller of take_dentry_name_snapshot(),
but may be freely dropped afterwards - the snapshot will stay
until destroyed by release_dentry_name_snapshot().

Intended use:
	struct name_snapshot s;

	take_dentry_name_snapshot(&s, dentry);
	...
	access s.name
	...
	release_dentry_name_snapshot(&s);

Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name
to pass down with event.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull security layer fixes from James Morris:
 "Bugfixes for TPM and SELinux"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  IB/core: Fix static analysis warning in ib_policy_change_task
  IB/core: Fix uninitialized variable use in check_qp_port_pkey_settings
  tpm: do not suspend/resume if power stays on
  tpm: use tpm2_pcr_read() in tpm2_do_selftest()
  tpm: use tpm_buf functions in tpm2_pcr_read()
  tpm_tis: make ilb_base_addr static
  tpm: consolidate the TPM startup code
  tpm: Enable CLKRUN protocol for Braswell systems
  tpm/tpm_crb: fix priv->cmd_size initialisation
  tpm: fix a kernel memory leak in tpm-sysfs.c
  tpm: Issue a TPM2_Shutdown for TPM2 devices.
  Add "shutdown" to "struct class".

James and Patrick haven't been active in years.
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'kbuild-thinar-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild thin archives updates from Masahiro Yamada:
 "Thin archives migration by Nicholas Piggin.

  THIN_ARCHIVES has been available for a while as an optional feature
  only for PowerPC architecture, but we do not need two different
  intermediate-artifact schemes.

  Using thin archives instead of conventional incremental linking has
  various advantages:

   - save disk space for builds

   - speed-up building a little

   - fix some link issues (for example, allyesconfig on ARM) due to more
     flexibility for the final linking

   - work better with dead code elimination we are planning

  As discussed before, this migration has been done unconditionally so
  that any problems caused by this will show up with "git bisect".

  With testing with 0-day and linux-next, some architectures actually
  showed up problems, but they were trivial and all fixed now"

* tag 'kbuild-thinar-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  tile: remove unneeded extra-y in Makefile
  kbuild: thin archives make default for all archs
  x86/um: thin archives build fix
  tile: thin archives fix linking
  ia64: thin archives fix linking
  sh: thin archives fix linking
  kbuild: handle libs-y archives separately from built-in.o archives
  kbuild: thin archives use P option to ar
  kbuild: thin archives final link close --whole-archives option
  ia64: remove unneeded extra-y in Makefile.gate
  tile: fix dependency and .*.cmd inclusion for incremental build
  sparc64: Use indirect calls in hamming weight stubs

Merge tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull misc Kbuild updates from Masahiro Yamada:

 - Use more portable shebang for Perl scripts

 - Remove trailing spaces from GCC version in kernel log

 - Make initramfs generation deterministic

* tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: create deterministic initramfs directory listings
  scripts/mkcompile_h: Remove trailing spaces from compiler version
  scripts: Switch to more portable Perl shebang

Pull Kbuild updates from Masahiro Yamada:

 - Clean up Makefiles and scripts

 - Improve clang support

 - Remove unneeded genhdr-y syntax

 - Remove unneeded cc-option-align macro

 - Introduce __cc-option macro and use it to fix x86 boot code compiler
   flags

* tag 'kbuild-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: improve comments on KBUILD_SRC
  x86/build: Specify stack alignment for clang
  x86/build: Use __cc-option for boot code compiler options
  kbuild: Add __cc-option macro
  kbuild: remove cc-option-align
  kbuild: replace genhdr-y with generated-y
  kbuild: clang: Disable 'address-of-packed-member' warning
  kbuild: remove duplicated arch/*/include/generated/uapi include path
  kbuild: speed up checksyscalls.sh
  kbuild: simplify silent build (-s) detection

Merge tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "This update consists of:

   - TAP13 framework and changes to some tests to convert to TAP13.
     Converting kselftest output to standard format will help identify
     run to run differences and pin point failures easily. TAP13 format
     has been in use for several years and the output is human friendly.

     Please find the specification:
       https://testanything.org/tap-version-13-specification.html

     Credit goes to Tim Bird for recommending TAP13 as a suitable
     format, and to Grag KH for kick starting the work with help from
     Paul Elder and Alice Ferrazzi

     The first phase of the TAp13 conversion is included in this update.
     Future updates will include updates to rest of the tests.

   - Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.

   - Kselftest documnetation has been converted to ReST format. Document
     now has a new home under Documentation/dev-tools.

   - kselftest_harness.h is now available for general use as a result of
     Mickaël Salaün's work.

   - Several fixes to skip and/or fail tests gracefully on older
     releases"

* tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (48 commits)
  selftests: membarrier: use ksft_* var arg msg api
  selftests: breakpoints: breakpoint_test_arm64: convert test to use TAP13
  selftests: breakpoints: step_after_suspend_test use ksft_* var arg msg api
  selftests: breakpoint_test: use ksft_* var arg msg api
  kselftest: add ksft_print_msg() function to output general information
  kselftest: make ksft_* output functions variadic
  selftests/capabilities: Fix the test_execve test
  selftests: intel_pstate: add .gitignore
  selftests: fix memory-hotplug test
  selftests: add missing test name in memory-hotplug test
  selftests: check percentage range for memory-hotplug test
  selftests: check hot-pluggagble memory for memory-hotplug test
  selftests: typo correction for memory-hotplug test
  selftests: ftrace: Use md5sum to take less time of checking logs
  tools/testing/selftests/sysctl: Add pre-check to the value of writes_strict
  kselftest.rst: do some adjustments after ReST conversion
  selftest/net/Makefile: Specify output with $(OUTPUT)
  selftest/intel_pstate/aperf: Use LDLIBS instead of LDFLAGS
  selftest/memfd/Makefile: Fix build error
  selftests: lib: Skip tests on missing test modules
  ...

Pull OpenRISC updates from Stafford Horne:
 "Openrisc fixes for this 4.13 merge window, there is not really much
  here:

   - include cleanups, one with should reduce build time slightly

   - switch to new toolchain to new (>2 year old) toolchain prefix"

* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
  openrisc: defconfig: Cleanup from old Kconfig options
  openrisc: explicitly include linux/bug.h in asm/fixmap.h
  openrisc: Switch to use export.h instead of module.h
  openrisc: Change toolchain from or32- to or1k-

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for STRICT_KERNEL_RWX on 64-bit server CPUs.

   - Platform support for FSP2 (476fpe) board

   - Enable ZONE_DEVICE on 64-bit server CPUs.

   - Generic & powerpc spin loop primitives to optimise busy waiting

   - Convert VDSO update function to use new update_vsyscall() interface

   - Optimisations to hypercall/syscall/context-switch paths

   - Improvements to the CPU idle code on Power8 and Power9.

  As well as many other fixes and improvements.

  Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman
  Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt,
  Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter,
  Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier
  Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown,
  Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N.
  Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek,
  Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung
  Bauermann, Yang Li"

* tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
  powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs
  powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix
  powerpc/mm/hash: Implement mark_rodata_ro() for hash
  powerpc/vmlinux.lds: Align __init_begin to 16M
  powerpc/lib/code-patching: Use alternate map for patch_instruction()
  powerpc/xmon: Add patch_instruction() support for xmon
  powerpc/kprobes/optprobes: Use patch_instruction()
  powerpc/kprobes: Move kprobes over to patch_instruction()
  powerpc/mm/radix: Fix execute permissions for interrupt_vectors
  powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp()
  powerpc/64s: Blacklist rtas entry/exit from kprobes
  powerpc/64s: Blacklist functions invoked on a trap
  powerpc/64s: Un-blacklist system_call() from kprobes
  powerpc/64s: Move system_call() symbol to just after setting MSR_EE
  powerpc/64s: Blacklist system_call() and system_call_common() from kprobes
  powerpc/64s: Convert .L__replay_interrupt_return to a local label
  powerpc64/elfv1: Only dereference function descriptor for non-text symbols
  cxl: Export library to support IBM XSL
  powerpc/dts: Use #include "..." to include local DT
  powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8
  ...

Michael Ellerman reported that commit 8c6657cb ("Switch flock
copyin/copyout primitives to copy_{from,to}_user()") broke his
networking on a bunch of PPC machines (64-bit kernel, 32-bit userspace).

The reason is a brown-paper bug by that commit, which had the arguments
to "copy_flock_fields()" in the wrong order, breaking the compat
handling for file locking.  Apparently very few people run 32-bit user
space on x86 any more, so the PPC people got the honor of noticing this
"feature".

Michael also sent a minimal diff that just changed the order of the
arguments in that macro.

This is not that minimal diff.

This not only changes the order of the arguments in the macro, it also
changes them to be pointers (to be consistent with all the other uses of
those pointers), and makes the functions that do all of this also have
the proper "const" attribution on the source pointers in order to make
issues like that (using the source as a destination) be really obvious.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull USB fixes from Greg KH:
 "Here are some remaining USB fixes for 4.13-rc1. They were originally
  scheduled for 4.12-final, but I didn't send them to you in time.
  Because of that, they were in a separate branch from the larger USB
  set of patches, so here they are in a separate pull request.

  Nothing major here a all, just three small patches:

   - some usb-serial new device ids
   - xhci bugfix for some crazy AMD hardware

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Limit USB2 port wake support for AMD Promontory hosts
  USB: serial: qcserial: new Sierra Wireless EM7305 device ID
  USB: serial: option: add two Longcheer device ids

Pull backlight updates from Lee Jones:
 "Core Framework:
   - Report correct error status to user

  Fix-ups:
   - Move Backlight headers out of I2C (adp8860, adp8870)"

* tag 'backlight-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  video: adp8870: move header file out of I2C realm
  backlight: adp8860: Move header file out of I2C realm
  backlight: Report error on failure

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Intel Cherry Trail Whiskey Cove PMIC
   - TI LP87565 PMIC

  New Device Support:
   - Add support for Cannonlake to intel-lpss-pci
   - Add support for Simatic IOT2000 to intel_quark_i2c_gpio

  New Functionality:
   - Add Regulator support (axp20x)

  Fix-ups:
   - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec)
   - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core)
   - Provide deregistration on unbind (rn5t618)
   - Rework DT code/documentation (arizona)
   - Constify things (fsl-imx25-tsadc)
   - MAINTAINERS updates (DA9062/61)
   - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C)
   - Switch to DMI matching (intel_quark_i2c_gpio)
   - Provide an appropriate level of error checking (wm831x-{i2c,spi},
     twl4030-irq, tc6393xb)
   - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc,
     stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc,
     exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099,
     motorola-cpcap)"

[ Skipped the last commit in that series that added eight thousand
  lines of pointless repeated register definitions.  - Linus ]

* tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits)
  mfd: Add LP87565 PMIC support
  mfd: cros_ec: Free IRQ on exit
  dt-bindings: vendor-prefixes: Add arctic to vendor prefix
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: axp20x-i2c: Document that this must be builtin on x86
  mfd: Add Cherry Trail Whiskey Cove PMIC driver
  mfd: tc6393xb: Handle return value of clk_prepare_enable
  mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform
  mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency
  mfd: motorola-cpcap: Use devm_of_platform_populate()
  mfd: smsc-ece: Use devm_of_platform_populate()
  mfd: qcom-spmi-pmic: Use devm_of_platform_populate()
  mfd: palmas: Use devm_of_platform_populate()
  mfd: exynos: Use devm_of_platform_populate()
  mfd: fsl-imx25: Use devm_of_platform_populate()
  mfd: cros_ec: Use devm_of_platform_populate()
  mfd: atmel: Use devm_of_platform_populate()
  mfd: stm32-timers: Use devm_of_platform_populate()
  mfd: intel_soc_pmic: Select designware i2c-bus driver
  ...