- 12 Mar, 2009 40 commits
-
-
Christof Schmitt authored
Report the fc_host_port_type as FC_PORTTYPE_NPIV when the subchannel is running in NPIV mode. This allows to see the correct type with lsscsi -H -t --list Acked-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Swen Schillig authored
A scheduled work might still be pending, running while the adapter is in progress to get dequeued from the system. This can lead to an invalid pointer dereference (Oops). Once the adpater is set online again, ensure the nameserver environment is initialized to the appropriate values again. Signed-off-by:
-
Swen Schillig authored
Ensure the refcounting is correct even if we were not able to schedule a work. In addition we have to make sure no scheduled work is pending while we're dequeing the adapter from the systems environment. Signed-off-by:
-
Martin Petermann authored
It will not be necessary to set the erp failed status bit in case a SCSI device is removed by the SCSI mid layer. In the case a SCSI device is unavailable for a short time (15 to 20 seconds) a FCP unit will not get on-line again. Signed-off-by:
Martin Petermann <martin@linux.vnet.ibm.com> Signed-off-by:
-
Christof Schmitt authored
Use the I/O blocking mechanism in the FC transport class to allow faster failovers for multipathing: - Call fc_remote_port_delete early to set the rport to BLOCKED. - Check the rport status in queuecommand with fc_remote_portchkready to no longer accept new I/O for this port and fail the I/O with the appropriate scsi_cmnd result. - Implement the terminate_rport_io handler to abort all pending I/O requests - Return SCSI commands with DID_TRANSPORT_DISRUPTED while erp is running. - When updating the remote port status, check for late changes and update the remote ports status accordingly. Acked-by:
-
Swen Schillig authored
After an error condition resolved a remote storage port was never re-opened. The incoming RSCN was not processed accordingly due to a misinterpreted status flag / return value combination. Signed-off-by:
-
Christof Schmitt authored
The usage of the PCI flag to trigger interrupts is optional. Even without setting the flag, qdio still receives interrupts to continue working on the queue. Remove the PCI flag from zfcp, it is not necessary. Acked-by:
-
Swen Schillig authored
The current number based id ERP logging is replaced by a string based tag version. The benefit is an easier location of the code in question and the removal of the lengthy array referencing the individual messages. The string (7 bytes) based version does not use more space since those bytes were "used" anyway due to the alignment of the structure. The encoding of the 7 byte string is as follows [0-1] = filename [2-5] = task/function [6] = section Due to the character of this string (fixed length) a string termination is not required here. Signed-off-by: -
Swen Schillig authored
An adapter close was always performed whether it was required, (e.g. in an error scenario) or not (e.g. initial open). This patch is changing the process in only doing an adapter close when it is required. Signed-off-by:
-
Swen Schillig authored
The status read response FSF_STATUS_READ_SUB_ERROR_PORT is not defined in the specs and therefore not valid. All occurrences are removed from the code. Signed-off-by:
-
Christof Schmitt authored
Issue ELS ADISC requests from workqueue. This allows the link test request to be sent when the request queue is full due to I/O load for other remote ports. It also simplifies request queue locking, zfcp_fsf_send_fcp_command_task is now the only function that has interrupts disabled from the caller. This is also a prereq for the FC passthrough support that issues ELS requests from userspace. Acked-by:
-
Christof Schmitt authored
When the SCSI midlayer is running error recovery, the low-level error recovery in zfcp could be running and preventing the SCSI midlayer to issue error recovery requests. To avoid unnecessary error recovery escalation, wait for the zfcp erp to finish and retry if necessary. While reworking the SCSI eh handlers, alsa cleanup the code and simplify the interface from zfcp_scsi to the fsf layer. Acked-by:
-
Christof Schmitt authored
For calls from zfcp erp, scsi_eh and sysfs switch the calls issuing FSF requests to zfcp_fsf_req_sbal_get to wait for free SBALs. Acked-by:
-
Christof Schmitt authored
Only increment the req_id for successfully issued requests. This avoids some confusion when debugging issued fsf requests. Acked-by:
-
Christof Schmitt authored
The lock only needs to protect the softirq context called from qdio against the userspace context called from sysfs. spin_lock and spin_lock_bh is enough. Acked-by:
-
Martin Peschke authored
Provide measurement data for the utilisation of the QDIO outbound queue. The additional value allows to calculate an average queue utilisation by looking at the deltas per time unit. Needed for capacity planning. It is up to user space to handle wrap-arounds of the 64 bit value. The new counter neatly complements the existing counter for queue full conditions. That is why, both statistics counter have been integrated. Signed-off-by:
Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by:
-
Christof Schmitt authored
Use the device pointer in zfcp_unit for tracking if we have a registered SCSI device. With this approach, the flag ZFCP_STATUS_UNIT_REGISTERED is only redundant and can be removed. Acked-by:
-
Christof Schmitt authored
PORT_PHYS_CLOSING is only set and cleared, but not actually used for status checking. PORT_INVALID_WWPN is set when the GID_PN request does not return a d_id for a remote port, e.g. when a remote port has been unplugged. For this case, the d_id is zero. In the erp we can check the d_id and use the normal escalation procedure that gives up after three retries and remove the special case. PORT_NO_WWPN is unused: Each port in the remote port list has a valid wwpn. The WKA ports are now tracked outside the port list. Remove the PORT_NO_WWPN flag, since this is no longer set for any port. Acked-by:
-
Alan Stern authored
The SCSI core calls scsi_proc_hostdir_add() from within scsi_host_alloc(), but the corresponding scsi_proc_hostdir_rm() routine is called from within scsi_remove_host(). As a result, if a host is allocated and then deallocated without ever being registered, the host's directory in /proc is leaked. This patch (as1181b) fixes this bug in the SCSI core by moving scsi_proc_hostdir_rm() into scsi_host_dev_release(). Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Tony Battersby authored
sym53c8xx prints a negotiation message after every check condition. This can add up to a lot of messages for removable-medium devices (CD-ROM, tape drives, etc.) that are being polled, since they return check condition when no medium is present. This patch suppresses the negotiation message if it would be the same as the last one printed. Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
-
Tony Battersby authored
sym53c8xx uses a command queue depth of 2 for untagged devices, without good reason. This _mostly_ seems to work ok, but it has caused me some subtle problems. For example, I have an application where one thread sends write commands to a tape drive, and another thread sends log sense polling commands. With a queue depth of 2, the polling commands end up being starved for long periods of time while multiple write commands are serviced (this may also be related to the fact the the sg driver queues commands in LIFO order). This problem is fixed by changing the queue depth to 1 for untagged devices. I have tested this change extensively with many different tape drives, medium changers, and disk drives (disk drives of course use tagged commands and are therefore unaffected by this patch). Signed-off-by:
-
Tony Battersby authored
sym_init_device() doesn't check if pci_iomap() fails. It also tries to map device RAM without first checking FE_RAM. 1) Move some initialization from sym_init_device() to the top of sym2_probe(). 2) Rename sym_init_device() to sym_iomap_device(). 3) Call sym_iomap_device() after sym_check_supported() instead of before so that device->chip.features will be set. 4) Check FE_RAM in sym_iomap_device() before mapping RAM. 5) If sym_iomap_device() cannot map registers, then abort. 6) If sym_iomap_device() cannot map RAM, then fall back to not using RAM and continue. 7) Remove the check for FE_RAM in sym_attach() since dev->ram_base is now always set correctly. Signed-off-by:
-
Tony Battersby authored
During sym2_probe(), sym_init_device() does pci_iomap(), but there is no corresponding pci_iounmap() if an error occurs before sym_attach() copies sym_device::s.{ioaddr,ramaddr} to np. 1) Add the sym_iounmap_device() function. 2) Call sym_iounmap_device() if an error occurs between sym_init_device() and the time sym_attach() allocates np. 3) Make sym_attach() copy sym_device::s.{ioaddr,ramaddr} to np before calling any function that can fail so that sym_free_resources() will do the unmap instead of sym_iounmap_device(). Also fixed by this patch: During sym2_probe(), if sym_check_raid() returns nonzero, then pci_release_regions() is never called. Signed-off-by: -
Tony Battersby authored
If sym_attach() gets an error at or before request_irq(), then sym_free_resources() will call free_irq() for an unregistered interrupt handler. Signed-off-by:
-
Tony Battersby authored
If sym_attach() fails to allocate np, the error path will dereference a NULL pointer for printk. Signed-off-by:
-
Tony Battersby authored
This patch fixes two bugs: 1) rmmod sym53c8xx uses shost after freeing it with scsi_put_host(shost). 2) insmod sym53c8xx doesn't call scsi_put_host(shost) if scsi_add_host() fails, causing a memory leak on the error path. Signed-off-by:
-
Wayne Boyer authored
Expose the debug and fastfail parameters to /sys/module/ipr/parameters such that they can be enabled/disabled at run time. Signed-off-by:
Wayne Boyer <wayneb@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Alan Stern authored
This patch (as1188) combines the tests for decrementing a drive's reported capacity and expands the comment. It also adds an informational message to the system log, informing the user when the reported value has been changed. Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
FUJITA Tomonori authored
This replaces the own list management for struct sg_fd with the standard list_head structure. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
FUJITA Tomonori authored
This changes sg_build_indirect() to use ALIGN macro instead of calculating by hand. Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
Julia Lawall authored
!ep->esb_stat is either 1 or 0, and the rightmost bit of ESB_ST_COMPLETE is always 0, making the result of !ep->esb_stat & ESB_ST_COMPLETE always 0. Thus parentheses around the argument to ! seem needed. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; constant C; @@ ( !E & !C | - !E & C + !(E & C) ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
James Bottomley authored
This allows it to compile and be used on the ps3 platform that wants to use the #define values in scsi.h without actually having CONFIG_SCSI set. Signed-off-by: -
Boaz Harrosh authored
Very old OSC's Target had a BUG in the Get/Set attributes where it was looking in the wrong places for attribute lists length. If used with the open-osd initiator, the initiator would dereference a NULL pointer when retrieving system_information attributes. Checks are added that retrieval of each attribute is successful before accessing its value. Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
FUJITA Tomonori authored
This fixes the following oops: http://marc.info/?l=linux-kernel&m=123316111415677&w=2 You can reproduce this bug by interrupting a program before a sg response completes. This leads to the special sg state (the orphan state), then sg calls blk_put_request in interrupt (rq->end_io). The above bug report shows the recursive lock problem because sg calls blk_put_request in interrupt. We could call __blk_put_request here instead however we also need to handle blk_rq_unmap_user here, which can't be called in interrupt too. In the orphan state, we don't need to care about the data transfer (the program revoked the command) so adding 'just free the resource' mode to blk_rq_unmap_user is a possible option. I prefer to avoid complicating the blk mapping API when possible. I change the orphan state to call sg_finish_rem_req via execute_in_process_context. We hold sg_fd->kref so sg_fd doesn't go away until keventd_wq finishes our work. copy_from_user/to_user fails so blk_rq_unmap_user just frees the resource without the data transfer. Signed-off-by:
-
Brian King authored
The ibmvfc driver currently always sets the role of all rports to FC_PORT_ROLE_FCP_TARGET, which is not correct for other initiators. This can cause problems if other initiators are on the fabric when we then try to scan the rport for LUNs. Fix this by looking at the service parameters returned in the PRLI to set the roles appropriately. Also look at the returned service parameters to decide whether or not we were actually able to successfully log into the target. Signed-off-by:
-
Chauhan, Vijay authored
During device discovery read capacity fails with 0x068b02 and sets the device size to 0. As a reason any I/O submitted to this path gets killed at sd_prep_fn with BLKPREP_KILL. This patch is to retry for 0x068b02 Signed-off-by:
Vijay Chauhan <vijay.chauhan@lsi.com> Acked-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
-
Wayne Boyer authored
Adds a message to the error table for an error that wasn't previously handled. In some cases the I/O Adapter will detect an error condition and mark a block as "logically bad". Signed-off-by:
-
Ilgu Hong authored
When we switch controllers the Intel Multi-Flex reports REPORTED_LUNS_DATA_HAS_CHANGED. This patch just has us retry the command. Signed-off-by:
Ilgu Hong <ilgu.hong@promise.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
