- 29 Jun, 2012 22 commits
-
-
Pablo Neira Ayuso authored
This patch adds a hook in the binding path of netlink. This is used by ctnetlink to allow module autoloading for the case in which one user executes: conntrack -E So far, this resulted in nfnetlink loaded, but not nf_conntrack_netlink. I have received in the past many complains on this behaviour. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
This patch adds the following structure: struct netlink_kernel_cfg { unsigned int groups; void (*input)(struct sk_buff *skb); struct mutex *cb_mutex; }; That can be passed to netlink_kernel_create to set optional configurations for netlink kernel sockets. I've populated this structure by looking for NULL and zero parameters at the existing code. The remaining parameters that always need to be set are still left in the original interface. That includes optional parameters for the netlink socket creation. This allows easy extensibility of this interface in the future. This patch also adapts all callers to use this new interface. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John Linville says: ==================== Here is another batch of updates intended for 3.6. This includes a number of pulls, including ones from the mac80211, iwlwifi, ath6kl, and wl12xx trees. I also pulled from the wireless tree to avoid potential build conflicts. There are a number of other patches applied directly, including a number for the Broadcom drivers and the mwifiex driver. The updates cover the usual variety of new hardware support and feature enhancements. It's all good work, but there aren't any big headliners. This does resolve a net-next/wireless-next merge conflict reported by Stephen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
commit 1f85d58c cnic: Remove uio mem[0]. introduced a regression as older versions of userspace app still rely on this mmap. Restore the mmap functionality and get the base address from pci_resource_start() as the nedev->base_addr has been deprecated for PCI devices. Update version to 2.5.12. Signed-off-by: Michael Chan <mchan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
-
David S. Miller authored
If rpfilter is off (or the SKB has an IPSEC path) and there are not tclassid users, we don't have to do anything at all when fib_validate_source() is invoked besides setting the itag to zero. We monitor tclassid uses with a counter (modified only under RTNL and marked __read_mostly) and we protect the fib_validate_source() real work with a test against this counter and whether rpfilter is to be done. Having a way to know whether we need no tclassid processing or not also opens the door for future optimized rpfilter algorithms that do not perform full FIB lookups. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Change l2tp_xmit_skb() to return NET_XMIT_DROP in case skb is dropped. Use kfree_skb() instead dev_kfree_skb() for drop_monitor pleasure. Support tx_dropped counter for l2tp_eth Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish chopra authored
o Set the ethtool_dump flag (=ETH_FW_DUMP_DISABLE) when dump is disabled. o update driver version to 4.0.80 Signed-off-by: Manish chopra <manish.chopra@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ville Nuorvala authored
At Facebook, we do Layer-3 DSR via IP-in-IP tunneling. Our load balancers wrap an extra IP header on incoming packets so they can be routed to the backend. In the v4 tunnel driver, when these packets fall on the default tunl0 device, the behavior is to decapsulate them and drop them back on the stack. So our setup is that tunl0 has the VIP and eth0 has (obviously) the backend's real address. In IPv6 we do the same thing, but the v6 tunnel driver didn't have this same behavior - if you didn't have an explicit tunnel setup, it would drop the packet. This patch brings that v4 feature to the v6 driver. The same IPv6 address checks are performed as with any normal tunnel, but as the fallback tunnel endpoint addresses are unspecified, the checks must be performed on a per-packet basis, rather than at tunnel configuration time. [Patch description modified by phil@ipom.com] Signed-off-by: Ville Nuorvala <ville.nuorvala@gmail.com> Tested-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Annie Li authored
After SKB is queued into tx_queue, it will be freed if request_gop is NULL. However, no dequeue action is called in this situation, it is likely that tx_queue constains freed SKB. This patch should fix this issue, and it is based on 3.5.0-rc4+. This issue is found through code inspection, no bug is seen with it currently. I run netperf test for several hours, and no network regression was found. Signed-off-by: Annie Li <annie.li@oracle.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sjur Brændeland authored
Fix the failing merge in net-next by reverting the last net-next merge for caif_hsi.c and then merge in the commit: "caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost" from the net repository. The commit:"caif-hsi: Add missing return in error path" from net repository was dropped, as it changed code previously removed in the net-next repository. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
We already set it several lines above. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Checking for in_dev being NULL is pointless. In fact, all of our callers have in_dev precomputed already, so just pass it in and remove the NULL checking. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Based upon feedback from Julian Anastasov. 1) Use route flags to determine multicast/broadcast, not the packet flags. 2) Leave saddr unspecified in flow key. 3) Adjust how we invoke inet_select_addr(). Pass ip_hdr(skb)->saddr as second arg, and if it was zeronet use link scope. 4) Use loopback as input interface in flow key. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Using NLMSG_GOODSIZE results in multiple pages being used as nlmsg_new() will automatically add the size of the netlink header to the payload thus exceeding the page limit. NLMSG_DEFAULT_SIZE takes this into account. Signed-off-by: Thomas Graf <tgraf@suug.ch> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
The code in tcp_v6_conn_request() was implicitly assuming that tcp_v6_send_synack() would take care of dst_release(), much as tcp_v4_send_synack() already does. This resulted in tcp_v6_conn_request() leaking a dst if sysctl_tw_recycle is enabled. This commit restructures tcp_v6_send_synack() so that it accepts a dst pointer and takes care of releasing the dst that is passed in, to plug the leak and avoid future surprises by bringing the IPv6 behavior in line with the IPv4 side. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
With the recent change (earlier in this patch series) to set flowi6_oif to treq->iif in inet6_csk_route_req(), the dst lookup in these two functions is now identical, so tcp_v6_send_synack() can now just call inet6_csk_route_req(), to reduce code duplication and keep things closer to the IPv4 side, which is structured this way. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
This commit changes inet_csk_route_req() so that it uses a pointer to a struct flowi6, rather than allocating its own on the stack. This brings its behavior in line with its IPv4 cousin, inet_csk_route_req(), and allows a follow-on patch to fix a dst leak. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
Fix inet6_csk_route_req() to use as the flowi6_oif the treq->iif, which is correctly fixed up in tcp_v6_conn_request() to handle the case of link-local addresses. This brings it in line with the tcp_v6_send_synack() code, which is already correctly using the treq->iif in this way. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/caif/caif_hsi.c drivers/net/usb/qmi_wwan.c The qmi_wwan merge was trivial. The caif_hsi.c, on the other hand, was not. It's a conflict between 1c385f1f ("caif-hsi: Replace platform device with ops structure.") in the net-next tree and commit 39abbaef ("caif-hsi: Postpone init of HIS until open()") in the net tree. I did my best with that one and will ask Sjur to check it out. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Mack authored
This fixes a number of warnings such as: CC drivers/net/ethernet/ti/davinci_cpdma.o drivers/net/ethernet/ti/davinci_cpdma.c:279:1: warning: data definition has no type or storage class drivers/net/ethernet/ti/davinci_cpdma.c:279:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL_GPL’ drivers/net/ethernet/ti/davinci_cpdma.c:279:1: warning: parameter names (without types) in function declaration Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Jun, 2012 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John Linville says: ==================== Amitkumar Karwar gives us two mwifiex fixes: one fixes some skb manipulations when handling some event messages; and another that does some similar fixing on an error path. Avinash Patil gives us a fix for for a memory leak in mwifiex. Dan Rosenberg offers an NFC NCI fix to enforce some message length limits to prevent buffer overflows. Eliad Peller provides a mac80211 fix to prevent some frames from being built with an invalid BSSID. Eric Dumazet sends an NFC fix to prevent a BUG caused by a NULL pointer dereference. Felix Fietkau has an ath9k fix for a regression causing LEAP-authenticated connection failures. Johannes Berg provides an iwlwifi fix that eliminates some log SPAM after an authentication/association timeout. He also provides a mac80211 fix to prevent incorrectly addressing certain action frames (and in so doing, to comply with the 802.11 specs). Larry Finger provides a few USB IDs for the rtl8192cu driver -- should be harmless. Panayiotis Karabassis provices a one-liner to fix kernel bug 42903 (a system freeze). Randy Dunlap provides a one-line Kconfig change to prevent build failures with some configurations. Stone Piao provides an mwifiex sequence numbering fix and a fix to prevent mwifiex from attempting to include eapol frames in an aggregation frame. Finally, Tom Hughes provides an ath9k fix for a NULL pointer dereference. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
The correct behavior is to program the interrupt coalescing regs (RXICr/TXICr) in accordance with the Rx/Tx Q's "rx/txcoalescing" flag. That is, if the coalescing flag is 0 for a given Rx/Tx queue then the corresponding coalescing register should be cleared. This behavior is correctly implemented for the single-queue mode (SQ_SG_MODE), but not for the multi-queue mode (MQ_MG_MODE). This fixes the later case. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vinson Lee authored
Make logging level consistent with other deprecation messages in net subsystem. Signed-off-by: Vinson Lee <vlee@twitter.com> Cc: David Mackey <tdmackey@twitter.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
usbnet_disconnect() will set intfdata to NULL before calling the minidriver unbind function. The cdc_wdm subdriver cannot know that it is disconnecting until the qmi_wwan unbind function has called its disconnect function. This means that we must be able to support the cdc_wdm subdriver operating normally while usbnet_disconnect() is running, and in particular that intfdata may be NULL. The only place this matters is in qmi_wwan_cdc_wdm_manage_power which is called from cdc_wdm. Simply testing for NULL intfdata there is sufficient to allow it to continue working at all times. Fixes this Oops where a cdc-wdm device was closed while the USB device was disconnecting, causing wdm_release to call qmi_wwan_cdc_wdm_manage_power after intfdata was set to NULL by usbnet_disconnect: [41819.087460] BUG: unable to handle kernel NULL pointer dereference at 00000080 [41819.087815] IP: [<f8640458>] qmi_wwan_manage_power+0x68/0x90 [qmi_wwan] [41819.088028] *pdpt = 000000000314f001 *pde = 0000000000000000 [41819.088028] Oops: 0002 [#1] SMP [41819.088028] Modules linked in: qmi_wwan option usb_wwan usbserial usbnet cdc_wdm nls_iso8859_1 nls_cp437 vfat fat usb_storage bnep rfcomm bluetooth parport_pc ppdev binfmt_misc iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables x_tables dm_crypt uvcvideo snd_hda_codec_realtek snd_hda_intel videobuf2_core snd_hda_codec joydev videodev videobuf2_vmalloc hid_multitouch snd_hwdep arc4 videobuf2_memops snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event ath9k mac80211 snd_seq ath9k_common ath9k_hw ath snd_timer snd_seq_device sparse_keymap dm_multipath scsi_dh coretemp mac_hid snd soundcore cfg80211 snd_page_alloc psmouse serio_raw microcode lp parport dm_mirror dm_region_hash dm_log usbhid hid i915 drm_kms_helper drm r8169 i2c_algo_bit wmi video [last unloaded: qmi_wwan] [41819.088028] [41819.088028] Pid: 23292, comm: qmicli Not tainted 3.4.0-5-generic #11-Ubuntu GIGABYTE T1005/T1005 [41819.088028] EIP: 0060:[<f8640458>] EFLAGS: 00010246 CPU: 1 [41819.088028] EIP is at qmi_wwan_manage_power+0x68/0x90 [qmi_wwan] [41819.088028] EAX: 00000000 EBX: 00000000 ECX: 000000c3 EDX: 00000000 [41819.088028] ESI: c3b27658 EDI: 00000000 EBP: c298bea4 ESP: c298be98 [41819.088028] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [41819.088028] CR0: 8005003b CR2: 00000080 CR3: 3605e000 CR4: 000007f0 [41819.088028] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [41819.088028] DR6: ffff0ff0 DR7: 00000400 [41819.088028] Process qmicli (pid: 23292, ti=c298a000 task=f343b280 task.ti=c298a000) [41819.088028] Stack: [41819.088028] 00000000 c3b27658 e2a80d00 c298beb0 f864051a c3b27600 c298bec0 f9027099 [41819.088028] c2fd6000 00000008 c298bef0 c1147f96 00000001 00000000 00000000 f4e54790 [41819.088028] ecf43a00 ecf43a00 c2fd6008 c2fd6000 ebbd7600 ffffffb9 c298bf08 c1144474 [41819.088028] Call Trace: [41819.088028] [<f864051a>] qmi_wwan_cdc_wdm_manage_power+0x1a/0x20 [qmi_wwan] [41819.088028] [<f9027099>] wdm_release+0x69/0x70 [cdc_wdm] [41819.088028] [<c1147f96>] fput+0xe6/0x210 [41819.088028] [<c1144474>] filp_close+0x54/0x80 [41819.088028] [<c1046a65>] put_files_struct+0x75/0xc0 [41819.088028] [<c1046b56>] exit_files+0x46/0x60 [41819.088028] [<c1046f81>] do_exit+0x141/0x780 [41819.088028] [<c107248f>] ? wake_up_state+0xf/0x20 [41819.088028] [<c1053f48>] ? signal_wake_up+0x28/0x40 [41819.088028] [<c1054f3b>] ? zap_other_threads+0x6b/0x80 [41819.088028] [<c1047864>] do_group_exit+0x34/0xa0 [41819.088028] [<c10478e8>] sys_exit_group+0x18/0x20 [41819.088028] [<c15bb7df>] sysenter_do_call+0x12/0x28 [41819.088028] Code: 04 83 e7 01 c1 e7 03 0f b6 42 18 83 e0 f7 09 f8 88 42 18 8b 43 04 e8 48 9a dd c8 89 f0 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90 <f0> ff 88 80 00 00 00 0f 94 c0 84 c0 75 b7 31 f6 8b 5d f4 89 f0 [41819.088028] EIP: [<f8640458>] qmi_wwan_manage_power+0x68/0x90 [qmi_wwan] SS:ESP 0068:c298be98 [41819.088028] CR2: 0000000000000080 [41819.149492] ---[ end trace 0944479ff8257f55 ]--- Reported-by: Marius Bjørnstad Kotsbak <marius.kotsbak@gmail.com> Cc: <stable@vger.kernel.org> # v3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon changes from Guenter Roeck: "Just e-mail address updates" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: Update my e-mail address hwmon: (applesmc) correct email address for Jesper Juhl
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: "This fixes: - the WDIOC_GETSTATUS return value - the unregister of all NMI events on exit - the loading of the iTCO_wdt driver after the conversion to the lpc_ich mfd model." * git://www.linux-watchdog.org/linux-watchdog: watchdog: core: fix WDIOC_GETSTATUS return value watchdog: hpwdt: Unregister NMI events on exit. watchdog: iTCO_wdt: add platform driver module alias
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull UDF fixes from Jan Kara: "Make UDF more robust in presence of corrupted filesystem" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fortify loading of sparing table udf: Avoid run away loop when partition table length is corrupted udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull ubi/ubifs fixes from Artem Bityutskiy: "Fix the debugfs regression - we never enable it because incorrect 'IS_ENABLED()' macro usage: should be 'IS_ENABLED(CONFIG_DEBUG_FS)', but we had 'IS_ENABLED(DEBUG_FS)'. Also fix incorrect assertion." * tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs: UBI: correct usage of IS_ENABLED() UBIFS: correct usage of IS_ENABLED() UBIFS: fix assertion
-
Wim Van Sebroeck authored
In commit 7a879824 we added a wrapper for the WDIOC_GETSTATUS ioctl call. The code results however in a different behaviour: it returns an error if the driver doesn't support the status operation. This is not according to the API that says that when we don't support the status operation, that we just should return a 0 value. Only when the device isn't there anymore, we should return an error. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Mingarelli, Thomas authored
This patch is to unregister for NMI events upon exit. Also we are now making the default setting for allow_kdump enabled. Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Jan Beulich authored
The recent conversion of iTCO_wdt resulted in the driver no longer getting loaded automatically, since it no longer has a MODULE_DEVICE_TABLE() included. As the lpc_ich driver now creates a platform device, auto-loading can easily be done by having a respective module alias in place. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Aaron Sierra <asierra@xes-inc.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
Amitkumar Karwar authored
As we don't provide custom regulatory rules to cfg80211, "chan->max_power" remains uninitialized (0dbm) and "chan->max_reg_power" will contain maximum power for a channel extracted from regulatory rules provided by CRDA; hence use "chan->max_reg_power" in reg_notifier handler instead of "chan->max_power" to set max_power in firmware. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
Since we don't support custom regulatory domains, WIPHY_FLAG_CUSTOM_REGULATORY should not be enabled during wiphy registration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
"priv->max_tx_power_level" and "priv->min_tx_power_level" variables are initialized to maximum and minimum power levels supported by hardware by sending correct firmware command. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
We miss to wakeup main thread after adding command to cmd pending queue at follwing places. These commands are handled later when main thread is woken up for handling an interrupt for sleep event from firmware. This adds worst case delay of 50msec. 1) We don't wakeup main thread when asynchronous command is added to cmd pending queue. Move queue_work() call from mwifiex_wait_queue_complete() to mwifiex_send_cmd_async() to wakeup main thread for sync as well as async commands. 2) Scan operation is triggered due to following reasons a) request from user (ex. "iw scan" command) b) Scan performed by driver internally. In first case main thread is woken up when first scan command is queued in cmd pending queue (we don't need to wakeup main thread for subsequent scan commands, because they are queued in scan command response handler), but it is not done for second case. queue_work() is moved inside mwifiex_scan_networks() to handle both the cases. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
The initvals tool from https://github.com/mcgrof/qca-swiss-army-knife has been modified to detect identical initval tables and replace them with macros. This patch contains the generated changes. On MIPS this reduces the binary size by 24 KB with no runtime changes. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Generated using the initvals tool from the qca-swiss-army-knife repository from https://github.com/mcgrof/qca-swiss-army-knifeSigned-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
seems i got a message like this ath: phy0: BT_Status_Update: is_link=0, linkId=2, state=1, SEQ=-2085766476 initially. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-