lookup sctp_association within sctp_do_peeloff() to enable its use outside of
the sctp code with minimal knowledge of the former.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

zero mac address is a valid address for VIC dynamic vnic and sriov Vf's.
Fix the check in enic_set_vf_mac appropriately
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A return code of non-zero of the devs ccwgroup set_offline function
leaves the dev in online state. Having done a partly offlining
may leave the dev in unusable state. To make sure the dev is set to
offline, zero is returned. A setup trace entry is written in case
the offlining steps encountered some trouble.
Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting an invalid mac-address for a qeth layer2 device returns
with a strange error code:
# ip link set hsi1 address 00:00:00:00:00:01
   RTNETLINK answers: Unknown error 18446744073709486085
Problem is caused by wrong usage of the return_code field within
structure qeth_ipa_cmd.
With this patch the ip command above returns
   SIOCSIFHWADDR: Invalid argument
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Communication Server Linux uses the ctcmpc code of the ctcm driver.
Sending problems have shown up caused by a wrong idal word list for
the first ccw. Function ctcmpc_chx_txdone() invokes the function
to prepare the idal word list without setting an appropriate length
for the first ccw, which may lead to an incomplete idal word list.
This patch sets the maximum buffer size as data length of the first
ccw. Thus correct idal word lists are guaranteed in all cases.
Signed-off-by: Belinda Thompson <belindat@us.ibm.com>
Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ctcmpc debugging can be activated defining constant DEBUGCCW.
The debugging part contains wrong checks for 64 bit addresses.
Thus the debugging version does not compile.
This patch corrects the 64-bit address checks to make it
compilable.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Reviewed-by: Belinda Thompson <belindat@us.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During system startup udev may try to configure devices in
parallel so we have to synchronize discipline module
loading.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

AF_IUCV sockets offer a shutdown function. This patch makes sure
shutdown works for HS transport as well.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of transport through HiperSockets the underlying network
interface may switch to DOWN state or the underlying network device
may recover. In both cases the socket must change to IUCV_DISCONN
state. If the interface goes down, af_iucv has a chance to notify
its connection peer in addition.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a master would like to raise the security level, it will send a
pairing request. While the pending security level is set on an incoming
security request (from a slave), it is not set on a pairing request. As
a result, the security level would not be raised on the slave in such
case.

Fix this by setting the pending security when receiving pairing
requests according to the requested authorization.
Signed-off-by: Ido Yariv <ido@wizery.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

The major index of the table is actually the remote I/O capabilities, not
the local ones. As a result, devices with different I/O capabilities
could have used wrong or even unsupported generation methods.
Signed-off-by: Ido Yariv <ido@wizery.com>
CC: Brian Gix <bgix@codeaurora.org>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

+ src/net/bluetooth/rfcomm/tty.c: warning: 'p' is used uninitialized in this
       function:  => 218
+ src/net/bluetooth/rfcomm/tty.c: warning: 'p' may be used uninitialized in
       this function:  => 218
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

The bluetooth module in the Asus UX31/UX21 is based on Atheros AR3012
and requires a firmware to be uploaded before it's usable.

output of usb-devices for this module:
T:  Bus=01 Lev=02 Prnt=02 Port=07 Cnt=03 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3375 Rev=00.02
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Eran <eran@over-here.org>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

commit a8afca03 (tcp: md5: protects md5sig_info with RCU) added a
lockdep splat in tcp_md5_do_lookup() in case a timer fires a tcp
retransmit.

At this point, socket lock is owned by the sofirq handler, not the user,
so we should adjust a bit the lockdep condition, as we dont hold
rcu_read_lock().
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Helps to find format mismatches at compile time
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>

This patch allows you to attach the timeout policy via the
CT target, it adds a new revision of the target to ensure
backward compatibility. Moreover, it also contains the glue
code to stick the timeout object defined via nfnetlink_cttimeout
to the given flow.

Example usage (it requires installing the nfct tool and
libnetfilter_cttimeout):

1) create the timeout policy:

 nfct timeout add tcp-policy0 inet tcp \
	established 1000 close 10 time_wait 10 last_ack 10

2) attach the timeout policy to the packet:

 iptables -I PREROUTING -t raw -p tcp -j CT --timeout tcp-policy0

You have to install the following user-space software:

a) libnetfilter_cttimeout:
   git://git.netfilter.org/libnetfilter_cttimeout

b) nfct:
   git://git.netfilter.org/nfct

You also have to get iptables with -j CT --timeout support.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch adds the timeout extension, which allows you to attach
specific timeout policies to flows.

This extension is only used by the template conntrack.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch adds the infrastructure to add fine timeout tuning
over nfnetlink. Now you can use the NFNL_SUBSYS_CTNETLINK_TIMEOUT
subsystem to create/delete/dump timeout objects that contain some
specific timeout policy for one flow.

The follow up patches will allow you attach timeout policy object
to conntrack via the CT target and the conntrack extension
infrastructure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch defines a new interface for l4 protocol trackers:

unsigned int *(*get_timeouts)(struct net *net);

that is used to return the array of unsigned int that contains
the timeouts that will be applied for this flow. This is passed
to the l4proto->new(...) and l4proto->packet(...) functions to
specify the timeout policy.

This interface allows per-net global timeout configuration
(although only DCCP supports this by now) and it will allow
custom custom timeout configuration by means of follow-up
patches.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch adds an array to define the default GRE timeouts.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch moves the retransmission and unacknowledged timeouts
to the tcp_timeouts array. This change is required by follow-up
patches.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Use one array to store the UDP timeouts instead of two variables.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

net/netfilter/nf_conntrack_proto.c:70 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
3 locks held by conntrack/3235:
nfnl_lock+0x17/0x20
netlink_dump+0x32/0x240
ctnetlink_dump_table+0x3e/0x170 [nf_conntrack_netlink]

stack backtrace:
Pid: 3235, comm: conntrack Tainted: G W  3.2.0+ #511
Call Trace:
[<ffffffff8108ce45>] lockdep_rcu_suspicious+0xe5/0x100
[<ffffffffa00ec6e1>] __nf_ct_l4proto_find+0x81/0xb0 [nf_conntrack]
[<ffffffffa0115675>] ctnetlink_fill_info+0x215/0x5f0 [nf_conntrack_netlink]
[<ffffffffa0115dc1>] ctnetlink_dump_table+0xd1/0x170 [nf_conntrack_netlink]
[<ffffffff815fbdbf>] netlink_dump+0x7f/0x240
[<ffffffff81090f9d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff815fd34f>] netlink_dump_start+0xdf/0x190
[<ffffffffa0111490>] ? ctnetlink_change_nat_seq_adj+0x160/0x160 [nf_conntrack_netlink]
[<ffffffffa0115cf0>] ? ctnetlink_get_conntrack+0x2a0/0x2a0 [nf_conntrack_netlink]
[<ffffffffa0115ad9>] ctnetlink_get_conntrack+0x89/0x2a0 [nf_conntrack_netlink]
[<ffffffff81603a47>] nfnetlink_rcv_msg+0x467/0x5f0
[<ffffffff81603a7c>] ? nfnetlink_rcv_msg+0x49c/0x5f0
[<ffffffff81603922>] ? nfnetlink_rcv_msg+0x342/0x5f0
[<ffffffff81071b21>] ? get_parent_ip+0x11/0x50
[<ffffffff816035e0>] ? nfnetlink_subsys_register+0x60/0x60
[<ffffffff815fed49>] netlink_rcv_skb+0xa9/0xd0
[<ffffffff81603475>] nfnetlink_rcv+0x15/0x20
[<ffffffff815fe70e>] netlink_unicast+0x1ae/0x1f0
[<ffffffff815fea16>] netlink_sendmsg+0x2c6/0x320
[<ffffffff815b2a87>] sock_sendmsg+0x117/0x130
[<ffffffff81125093>] ? might_fault+0x53/0xb0
[<ffffffff811250dc>] ? might_fault+0x9c/0xb0
[<ffffffff81125093>] ? might_fault+0x53/0xb0
[<ffffffff815b5991>] ? move_addr_to_kernel+0x71/0x80
[<ffffffff815b644e>] sys_sendto+0xfe/0x130
[<ffffffff815b5c94>] ? sys_bind+0xb4/0xd0
[<ffffffff817a8a0e>] ? retint_swapgs+0xe/0x13
[<ffffffff817afcd2>] system_call_fastpath+0x16/0x1b
Reported-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>

In 16059b5 netfilter: merge ipt_LOG and ip6_LOG into xt_LOG, we have
merged ipt_LOG and ip6t_LOG.

However:

IN=wlan0 OUT= MAC=xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
SRC=213.150.61.61 DST=192.168.1.133 LEN=40 TOS=0x00 PREC=0x00 TTL=117
ID=10539 DF PROTO=TCP SPT=80 DPT=49013 WINDOW=0 RES=0x00 ACK RST
URGP=0 PROTO=UDPLITE SPT=80 DPT=49013 LEN=45843 PROTO=ICMP TYPE=0
       ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Several missing break in the code led to including bogus layer-4
information. This patch fixes this problem.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

These two headers are not required anymore, they have been
replaced by xt_SAME.h and xt_realm.h.

Florian Westphal pointed out this.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

* identation lowered
* some CPU cycles saved at delayed item variable initialization
Signed-off-by: Tony Zelenoff <antonz@parallels.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: Tony Zelenoff <antonz@parallels.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ipt_LOG and ip6_LOG have a lot of common code, merge them
to reduce duplicate code.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch allows you to set expectfn which is specifically used
by the NAT side of most of the existing conntrack helpers.

I have added a symbol map that uses a string as key to look up for
the function that is attached to the expectation object. This is
the best solution I came out with to solve this issue.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch adds the missing bits to create expectations that
are created in NAT setups.

This patch allows you to set the expectation class.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch allow you to set the helper for newly created
expectations based of the CTA_EXPECT_HELP_NAME attribute.
Before this, the helper set was NULL.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Timed out entries were still matched till the garbage collector
purged them out. The fix is verified in the testsuite.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The "nomatch" keyword and option is added to the hash:*net* types,
by which one can add exception entries to sets. Example:

        ipset create test hash:net
        ipset add test 192.168.0/24
        ipset add test 192.168.0/30 nomatch

In this case the IP addresses from 192.168.0/24 except 192.168.0/30
match the elements of the set.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

If the set is full, the SET target cannot add more elements.
Log warning so that the admin got notified about it.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

iptables's libxt_SET.c depends on these.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ipset is actually using NFPROTO values rather than AF (xt_set passes
that along).
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>