- 11 Apr, 2017 3 commits
-
-
Chris Wilson authored
We acquire the forcewake and use I915_READ_FW instead for the atomic wait within intel_uncore_wait_for_register. However, this still leaves us vulnerable to concurrent mmio access to the register, which can cause system hangs on gen7. The protection is to acquire uncore.lock around each register, so lets add it back. v2: Wrap __intel_wait_for_register_fw() to re-use its atomic wait_for loop and spare adding another for ourselves. v3: Add might_sleep() annotation Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170411101340.31994-3-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Chris Wilson authored
submit_request() is called from an atomic context, it's not allowed to sleep. We have to be careful in our parameters to intel_uncore_wait_for_register() to limit ourselves to the atomic wait loop and not incur the wrath of our warnings. Fixes: 6976e74b ("drm/i915: Don't allow overuse of __intel_wait_for_register_fw()") Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
Chris Wilson authored
Allow the caller to use the fast_timeout_us to specify how long to wait within the atomic section, rather than transparently switching to a sleeping loop for larger values. This is required as some callsites may need a long wait and are in an atomic section. v2: Reinforce kerneldoc fast_timeout_us limit with a GEM_BUG_ON Signed-off-by:
-
- 10 Apr, 2017 3 commits
-
-
Michal Wajdeczko authored
This function should not be called with long timeouts in atomic context. Annotate it as might_sleep if timeout is longer than 10us. v2: fix comment (Michal) Signed-off-by:
-
Michal Wajdeczko authored
These params are passed by value, const qualifiers are ignored any way. While around, unify timeout_ms type from long to int. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170410093817.151280-1-michal.wajdeczko@intel.comReviewed-by:
-
Chris Wilson authored
The void *data passed to debugfs callbacks is actually the drm_i915_private pointer, so use it thusly and avoid the to_i915(dev) indirection. Signed-off-by:
-
- 07 Apr, 2017 14 commits
-
-
Michal Wajdeczko authored
Waiting for the response status in scratch register can be done using our generic function. Let's use it. v2: rebased Signed-off-by:
-
Michal Wajdeczko authored
In some cases we may want to spend more time in atomic wait than hardcoded 2us. Let's add additional fast timeout parameter to allow flexible configuration of atomic timeout before switching into heavy wait. Add also possibility to return registry value to avoid extra read. v2: use explicit fast timeout (Tvrtko/Chris) allow returning register value (Chris) Signed-off-by: -
Michal Wajdeczko authored
There is no need to specify timeout as unsigned long since this parameter will be consumed by usecs_to_jiffies() which expects unsigned int only. Signed-off-by:
-
Chris Wilson authored
As we may have very many objects to free, check to see if the task needs to be rescheduled whilst freeing them. Suggested-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Chris Wilson authored
Before freeing the next batch of objects from the worker, check if the worker's timeslice has expired and if so, defer the next batch to the next invocation of the worker. Suggested-by:
-
Joonas Lahtinen authored
By using the same structure for both interruptible and uninterruptible locking in shrinker code, combined with the information that mm.interruptible is only being written to, the code can be greatly simplified. Also removing the i915_gem_ prefix from the locking functions so that nobody in their wildest dreams considers exporting them. Signed-off-by:
-
Joonas Lahtinen authored
Only call synchronize_rcu_expedited after unlocking struct_mutex to avoid deadlock because the workqueues depend on struct_mutex. >From original patch by Andrea: synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will hang until its own workqueues are run. The i915 gem workqueues will wait on the struct_mutex to be released. So we cannot wait for a quiescent state using those rcu primitives while holding the struct_mutex or it creates a circular lock dependency resulting in kernel hangs (which is reproducible but goes undetected by lockdep). kswapd0 D 0 700 2 0x00000000 Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? _synchronize_rcu_expedited.constprop.65+0x2ef/0x300 ? wake_up_bit+0x20/0x20 ? rcu_stall_kick_kthreads.part.54+0xc0/0xc0 ? rcu_exp_wait_wake+0x530/0x530 ? i915_gem_shrink+0x34b/0x4b0 ? i915_gem_shrinker_scan+0x7c/0x90 ? i915_gem_shrinker_scan+0x7c/0x90 ? shrink_slab.part.61.constprop.72+0x1c1/0x3a0 ? shrink_zone+0x154/0x160 ? kswapd+0x40a/0x720 ? kthread+0xf4/0x130 ? try_to_free_pages+0x450/0x450 ? kthread_create_on_node+0x40/0x40 ? ret_from_fork+0x23/0x30 plasmashell D 0 4657 4614 0x00000000 Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? schedule_preempt_disabled+0xe/0x10 ? __mutex_lock.isra.4+0x1c9/0x790 ? i915_gem_close_object+0x26/0xc0 ? i915_gem_close_object+0x26/0xc0 ? drm_gem_object_release_handle+0x48/0x90 ? drm_gem_handle_delete+0x50/0x80 ? drm_ioctl+0x1fa/0x420 ? drm_gem_handle_create+0x40/0x40 ? pipe_write+0x391/0x410 ? __vfs_write+0xc6/0x120 ? do_vfs_ioctl+0x8b/0x5d0 ? SyS_ioctl+0x3b/0x70 ? entry_SYSCALL_64_fastpath+0x13/0x94 kworker/0:0 D 0 29186 2 0x00000000 Workqueue: events __i915_gem_free_work Call Trace: ? __schedule+0x1a5/0x660 ? schedule+0x36/0x80 ? schedule_preempt_disabled+0xe/0x10 ? __mutex_lock.isra.4+0x1c9/0x790 ? del_timer_sync+0x44/0x50 ? update_curr+0x57/0x110 ? __i915_gem_free_objects+0x31/0x300 ? __i915_gem_free_objects+0x31/0x300 ? __i915_gem_free_work+0x2d/0x40 ? process_one_work+0x13a/0x3b0 ? worker_thread+0x4a/0x460 ? kthread+0xf4/0x130 ? process_one_work+0x3b0/0x3b0 ? kthread_create_on_node+0x40/0x40 ? ret_from_fork+0x23/0x30 Fixes: 3d3d18f0 ("drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)") Reported-by:
-
Chris Wilson authored
As we call into the shrinker during freeze, we may have freed more objects since we idled during i915_gem_suspend. Make sure we flush the i915_gem_free_objects worker prior to saving the unwanted pages into the hibernation image. Signed-off-by:
-
Chris Wilson authored
The shrinker is prepared to be called unlocked (and at other times with struct_mutex held for DIRECT_RECLAIM) so we can skip acquiring the struct_mutex prior to calling the shrinker during freeze. This improves our ability to shrink as we can be more aggressive when we know the caller isn't holding struct_mutex. Signed-off-by:
-
Andrea Arcangeli authored
Just in case the llist model changes and NULL isn't valid initialization. Signed-off-by:
-
Chris Wilson authored
When we retire the last request on the ring, before we ever access that ring again we know it will be completely idle and so we can advance the ring->head fully to the end (i.e. ring->tail) and not just to the start of the breadcrumb. This allows us to skip re-emitting the breadcrumb after resetting the GPU if the ring was entirely idle. This prevents us from overwriting a seqno wraparound by re-executing a stale breadcrumb, i.e. submit_request(1) intel_engine_init_global_seqno(0) i915_reset() would then leave 1 in the HWS, but the next request to execute would also be with seqno 1. The sanity checks upon submission detect this as a timewarp and explode. By setting the ring as empty, upon reset the HWS is left as 0, leaving it consistent with the timeline. v2: Fix check for deleting last element of list. We know that this request is always the first element of the ring, so only if next points back to the start will this be the only request in flight. v3: Remove opencoding of list_is_last() v4: Move the block to its own function for some clarity. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100144 Testcase: igt/gem_exec_whisper/hang-* Signed-off-by:
-
Chris Wilson authored
When we update the global seqno (on the engine timeline), we modify HW state (both registers and mapped pages). As we do this, we should be sure that the HW is idle and we are not causing a conflict. The caller is supposed to wait_for_idle before calling us to update the seqno, so let's assert they have and the engine is indeed idle. Signed-off-by:
-
Anusha Srivatsa authored
Load HuC version 1.07.1748 on GLK. v2: rebased. v3: Use name of the right platform(John Spotswood) v4: rebased. Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
John Spotswood <john.a.spotswood@intel.com> Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1490905447-15815-2-git-send-email-anusha.srivatsa@intel.com
-
Anusha Srivatsa authored
Load GuC 10.56 on GLK. Work on firmware is still in progress. Testing has not been done yet. This patch addresses the initial need to load the GuC firmware for HuC authentication v2: rebased. Cc: Jeff mcgee <jeff.mcgee@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Signed-off-by:
-
- 06 Apr, 2017 8 commits
-
-
Chris Wilson authored
Many sightings report the greater prevalence of allocation failures. This is all due to the incorrect use of mapping_gfp_constraint(), so remove it in favour of just querying the mapping_gfp_mask() which are the exact gfp_t we wanted in the first place. We still do expect a higher chance of reporting ENOMEM, as that is the intention of using __GFP_NORETRY -- to fail rather than oom after having reclaimed from our bo caches, and having done a direct|kswapd reclaim pass. Reported-by:
Jason Ekstrand <jason.ekstrand@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100594 Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Signed-off-by:
-
Madhav Chauhan authored
As per BSPEC, valid cdclk values for glk are 79.2, 158.4, 316.8 Mhz. Practically we can achive only 99% of these cdclk values (HW team checking on this). So cdclk should be calculated for the given pixclk as per that otherwise it may lead to screen corruption, explained below: 1. For DSI AUO panel(1920x1200 @60) required pixclk is 157100 KHZ 2. glk_calc_cdclk returns 79200 KHZ for this pixclk, For 2PPC it will be 158400 KHZ 3. Practically 100% of the cdclk can’t be achieved, so 99% of 158400 KHZ = 156816 which is less than the desired pixlclk and causes panel corruption. v2: Rebased to new CDLCK code framework v3: Addressed review comments from Ander/Jani - Add comment in code about 99% usage of CDCLK - Calculate max dot clock as well with 99% limit v4 by Jani: - drop superfluous whitespace change - rewrite code comments to clarify v5: Added details of non-working scenario in commit message Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491397463-13637-1-git-send-email-madhav.chauhan@intel.com
-
Jani Nikula authored
There is some conflation related to sink rates, making this change more complicated than it would otherwise have to be. There are three changes here that are rather difficult to split up: 1) Use the intel_dp->sink_rates array for all DP, not just eDP 1.4. We initialize it from DPCD on eDP 1.4 like before, but generate it based on DP_MAX_LINK_RATE on others. This reduces code complexity when we need to use the sink rates; they are all always in the sink_rates array. 2) Update the sink rate array whenever we read DPCD, and use the information from there. This increases code readability when we need the sink rates. 3) Disentangle fallback rate limiting from sink rates. In the code, the max rate is a dynamic property of the *link*, not of the *sink*. Do the limiting after intersecting the source and sink rates, which are static properties of the devices. This paves the way for follow-up refactoring that I've refrained from doing here to keep this change as simple as it possibly can. v2: introduce use_rate_select and handle non-confirming eDP (Ville) v3: don't clobber cached eDP rates on short pulse (Ville) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Jani Nikula authored
We need the source rates array so often that it makes sense to set it once at init. This reduces function calls when we need the rates, making the code easier to follow. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Rename the function, move it at the top, and reuse in intel_dp_link_rate_index(). If there was a reason in the past to use reverse search order here, there isn't now. The names may be slightly confusing now, but intel_dp_link_rate_index() will go away in follow-up patches. v2: Use name intel_dp_rate_index (Dhinakaran) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
We shouldn't silently use the first element if we can't find the rate we're looking for. Make rate_to_index() more generally useful, and fallback to the first element in the caller, with a big warning. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
I can't think of a real world bug this could cause now, but this will be required in follow-up work. While at it, change the parameter order to be slightly more sensible. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Sagar Arun Kamble authored
i915 is currently doing a full GPU reset at the end of i915_gem_suspend() followed by GuC suspend in i915_drm_suspend(). This GPU reset clobbers the GuC, causing the suspend request to then fail, leaving the GuC in an undefined state. We need to tell the GuC to suspend before we do the direct intel_gpu_reset(). v2: Commit message update. (Chris, Daniele) Fixes: 1c777c5d ("drm/i915/hsw: Fix GPU hang during resume from S3-devices state") Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491387710-20553-1-git-send-email-sagar.a.kamble@intel.comReviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by:
-
- 05 Apr, 2017 5 commits
-
-
Ville Syrjälä authored
VLV/CHV watermarks are now able to handle the radiation, so mark these platforms as ready for atomic. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Suggested-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170303151928.23053-5-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
VLV/CHV don't have double buffered watermarks so they need to consider the cursor visibility as a special case just like ILK-BDW. Let's use the helper we have for that. Signed-off-by:
-
Ville Syrjälä authored
The VLV/CHV watermark calculation is really interested in the hardware plane type rather than the plane type (which is more of a software concept). Let's check plane->id rather plane->type. No functional changes. Signed-off-by:
-
Michal Wajdeczko authored
Almost all other GuC fw definitions are using GUC|guc prefix. While around, in get_core_family() change explicit WARN into MISSING_CASE as it looks more appropriate, since GuC support capability we are controlling by intel_device_info.has_guc flag. Signed-off-by:
-
Dhinakaran Pandiyan authored
Noticed this while I was looking at some debug output, [drm:intel_hdmi_compute_config [i915]] picking bpc to 12 for HDMI output [drm:intel_hdmi_compute_config [i915]] forcing pipe bpc to 36 for HDMI I believe the second line should be pipe *bpp* Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
- 04 Apr, 2017 5 commits
-
-
Ville Syrjälä authored
We're clearing the legacy_cursor_update flag before calling drm_atomic_helper_setup_commit() which means the helper will wait for the flip to complete before cleaning up the framebuffers. That's not what we want for the legacy cursor, so let's clear the flag after setting up the commit. Also toss in a FIXME about solving these problems in a nicer way using the fabled vblank workers. v2: Also unsync with legacy page flips Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Rafael Ristovski <rafael.ristovski@gmail.com> Fixes: a5509abd ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW") Signed-off-by:
-
Michal Wajdeczko authored
On last guc/huc cleanup series we've simplified guc init hw function but missed the one for the huc. While here, change its signature as we don't care about huc loading status. Signed-off-by:
-
Chris Wilson authored
If the engine is continually completing nops, we can saturate the signaler and keep it working indefinitely. This angers the NMI watchdog! A good example is to disable semaphores on snb and run igt/gem_exec_nop - the parallel, multi-engine workloads are more than sufficient to hog the CPU, preventing the system from even processing ICMP echo replies. v2: Tvrtko dug into cond_resched() on x86 and found that it only depended upon preempt_count and not tif_need_resched() - which means that we would always call schedule() at that point. Fixes: c81d4613 ("drm/i915: Convert trace-irq to the breadcrumb waiter") Signed-off-by:
-
Chris Wilson authored
If the signal to park arrives before we sleep, then we need to check kthread_should_park() before sleeping to avoid missing the signal. Otherwise, if the signal arrives whilst we are processing completed requests, we will reset the current->state back to TASK_INTERRUPTIBLE and so miss the wakeup. Fixes: fe3288b5 ("drm/i915: Park the breadcrumbs signaler across a GPU reset") Signed-off-by:
-
Tvrtko Ursulin authored
Since this can be triggered by simply attempting a huge object, a WARN_ON is not appropriate. Signed-off-by:
-
- 03 Apr, 2017 2 commits
-
-
Chris Wilson authored
Rather than call intel_engine_cleanup() with a partially constructed engine, unwind the error during intel_init_ring_common(). Signed-off-by:
-
Chris Wilson authored
Or rather it is used only by intel_ring_pin() to extract the drm_i915_private which we can easily pass in. As this is a relatively rare operation, save the space in the struct, and as such it is even break even in the extra code for passing around the parameter: add/remove: 0/0 grow/shrink: 2/3 up/down: 15/-15 (0) function old new delta intel_init_ring_buffer 906 918 +12 execlists_context_pin 1308 1311 +3 mock_engine 407 403 -4 intel_engine_create_ring 367 363 -4 intel_ring_pin 326 319 -7 Total: Before=1261794, After=1261794, chg +0.00% v2: Reorder intel_init_ring_buffer to keep the ring setup together: add/remove: 0/0 grow/shrink: 2/3 up/down: 9/-15 (-6) function old new delta intel_init_ring_buffer 906 912 +6 execlists_context_pin 1308 1311 +3 mock_engine 407 403 -4 intel_engine_create_ring 367 363 -4 intel_ring_pin 326 319 -7 Total: Before=1261794, After=1261788, chg -0.00% Signed-off-by:
-
