- 23 Jun, 2016 3 commits
-
-
Tony Lindgren authored
Kexec booted kernels on omap4 will hang early during the boot if the booted kernel is different version from the previous kernel. This is because the previous kernel may have configured low-power mode using CPU1_WAKEUP_NS_PA_ADDR. In that case it points to the previous kernel's omap4_secondary_startup(), and CPU1 can be in low power mode from the previous kernel. When the new kernel configures the CPU1 clockdomain, CPU1 can wake from low power state prematurely during omap44xx_clockdomains_init() running random code. Let's fix the issue by configuring CPU1_WAKEUP_NS_PA_ADDR before we call omap44xx_clockdomains_init(). Note that this is very early during the init, and we will do proper CPU1 reset during SMP init a bit later on in omap4_smp_prepare_cpus(). And we need to do this when SMP is not enabled as the previous kernel may have had it enabled. Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Tested-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Prepare things for making kexec work on SMP omap variants by initializing SARM RAM base early. This allows us to configure CPU1 for kexec in case the previous kernel has put CPU1 in low power mode. Note that this should not prevent moving other SAR RAM code to live under drivers. However for kexec, we will need this very early. Acked-by:
-
Tony Lindgren authored
-
- 22 Jun, 2016 3 commits
-
-
Keerthy authored
As per the TRM: http://www.ti.com/lit/ug/spruh73m/spruh73m.pdf offset 0x4 is reserved for PRM_PER. Hence removing the wrongly defined address offset. Signed-off-by:
-
Ben Dooks authored
The ti81xx_rtc_hwmod is not exported, or declared outside the file arch/arm/mach-omap2/omap_hwmod_81xx_data.c so make it static to avoid the following warning: arch/arm/mach-omap2/omap_hwmod_81xx_data.c:246:19: warning: symbol 'ti81xx_rtc_hwmod' was not declared. Should it be static? Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
-
Keerthy authored
pruss hwmod RSTST register wrongly points to PWRSTCTRL register in case of am43xx. Fix the RSTST register offset value. This can lead to setting of wrong power state values for PER domain. Fixes: 1c7e224d ("ARM: OMAP2+: hwmod: AM335x: runtime register update") Signed-off-by:
-
- 10 Jun, 2016 17 commits
-
-
Tomi Valkeinen authored
The addresses for DSS are provided in the DT data, so they can be removed from the hwmod. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Vignesh R authored
QSPI address space information is passed from device tree. Therefore remove legacy way of passing address space via hwmod data. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
The new pdata callback (force_ick_on) is now used by the driver and the old callback related code can be removed. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
The McBSP sidetone (in OMAP3 McBSP2 and 3 module) is working with the module's interface clock. When the sidetone is enabled the iclk must not idle because it will result in choppy sidetone. Switch to use the new callback for handling the iclk allow/deny idle configuration. For this the driver needs to get the module's ick clock and pass the clk pointer to the callback. In DT boot, the pdata-quirk is going to set up the callback for the driver so save it if it is set in the pdata of the device. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
The function will do more then removing the sysfs files in the future. Signed-off-by:
-
Peter Ujfalusi authored
McBSP2/3 module's sidetone module operates using the module's ICLK clock. When the Sidetone is in use the interface clock of the module must not idle. To prevent the iclk idling the driver expects to have pdata callback to call. With this patch the callback is going to be set up for DT boot also. Signed-off-by:
-
Peter Ujfalusi authored
McBSP2/3 module's sidetone module operates using the module's ICLK clock. When the Sidetone is in use the interface clock of the module must not idle. The new callback expects to receive the *clk of the module's ick and not the id number of the McBSP. This will allow us more cleanups and going to simplify the ICLK handling. Signed-off-by:
-
Peter Ujfalusi authored
The McBSPLP's sidetone main clock is the McBSPLP's ICLK, not FCLK as the sidetone only receives the ICLK from the main McBSP module. Since the McBSP and sidetone is using the very same clock from PRCM level the sidetone must not have the prcm section to check the clock status since the sidetone is only used when McBSP is already configured. If two separate hwmods looking at the same bit and they would use pm_runtime in nested way (as it must happen with McBSP and it's ST module) the hwmod would warn, because the idlest will not match what it is expected after enable/disable of the clocks. Signed-off-by:
-
Franklin S Cooper Jr authored
Devices that utilize the OCP registers and/or PRCM registers and register bit fields should be modeled using hwmod. Since eQEP, ePWM and eCAP don't fall under this category, remove their hwmod entries. Instead these clocks simply use the clock that is passed through by its parent PWMSS. Therefore, PWMSS handles the clock for itself and its subdevices. Signed-off-by:
Franklin S Cooper Jr <fcooper@ti.com> Acked-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Franklin S Cooper Jr authored
Add tblck to the pwm nodes. This insures that the ehrpwm driver has access to the time-based clk. Do not remove similar entries for ehrpwm node. Later patches will switch from using ehrpwm node name to pwm. But to maintain ABI compatibility we shouldn't remove the old entries. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
- 09 Jun, 2016 1 commit
-
-
Tony Lindgren authored
Merge branch 'peter/for-4.8_omapdss_part1' of https://github.com/omap-audio/linux-audio into omap-for-v4.8/soc
-
- 03 Jun, 2016 4 commits
-
-
Peter Ujfalusi authored
Instead of the full omapdss internal header, include only the platform_data header. Signed-off-by:
-
Peter Ujfalusi authored
Create a new header file for platform data used by omapdss. Signed-off-by: -
Peter Ujfalusi authored
The omap_display_init() is implemented in the mach-omap2/display.c so the declaration should have been there as well. Change the board files to include display.h to avoid build breakage at the same time. Signed-off-by:
-
Peter Ujfalusi authored
OMAP_DSS_VENC_TYPE_COMPOSITE is 0. There is no need to explicitly set the connector_type. This change is needed for the omapdss header cleanup. Signed-off-by:
-
- 29 May, 2016 3 commits
-
-
Linus Torvalds authored
-
George Spelvin authored
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
George Spelvin authored
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
-
- 28 May, 2016 9 commits
-
-
Mikulas Patocka authored
The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0b ("affs: kstrdup() memory handling") Signed-off-by:
-
Mikulas Patocka authored
Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611 ("hpfs: kstrdup() out of memory handling") Signed-off-by:
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ... -
Guenter Roeck authored
Various builds (such as i386:allmodconfig) fail with fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return' fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token [ Oops. My bad, I had stupidly thought that "allmodconfig" covered this on x86-64 too, but it obviously doesn't. Egg on my face. - Linus ] Fixes: 5d22fc25 ("mm: remove more IS_ERR_VALUE abuses") Signed-off-by: -
git://ftp.sciencehorizons.net/linuxLinus Torvalds authored
Pull string hash improvements from George Spelvin: "This series does several related things: - Makes the dcache hash (fs/namei.c) useful for general kernel use. (Thanks to Bruce for noticing the zero-length corner case) - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the above. - Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two 32-bit multiplies will do well enough. - Rids the world of the bad hash multipliers in hash_32. This finishes the job started in commit 689de1d6 ("Minimal fix-up of bad hashing behavior of hash_64()") The vast majority of Linux architectures have hardware support for 32x32-bit multiply and so derive no benefit from "simplified" multipliers. The few processors that do not (68000, h8/300 and some models of Microblaze) have arch-specific implementations added. Those patches are last in the series. - Overhauls the dcache hash mixing. The patch in commit 0fed3ac8 ("namei: Improve hash mixing if CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion. Replaced with a much more careful design that's simultaneously faster and better. (My own invention, as there was noting suitable in the literature I could find. Comments welcome!) - Modify the hash_name() loop to skip the initial HASH_MIX(). This would let us salt the hash if we ever wanted to. - Sort out partial_name_hash(). The hash function is declared as using a long state, even though it's truncated to 32 bits at the end and the extra internal state contributes nothing to the result. And some callers do odd things: - fs/hfs/string.c only allocates 32 bits of state - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes - Modify bytemask_from_count to handle inputs of 1..sizeof(long) rather than 0..sizeof(long)-1. This would simplify users other than full_name_hash" Special thanks to Bruce Fields for testing and finding bugs in v1. (I learned some humbling lessons about "obviously correct" code.) On the arch-specific front, the m68k assembly has been tested in a standalone test harness, I've been in contact with the Microblaze maintainers who mostly don't care, as the hardware multiplier is never omitted in real-world applications, and I haven't heard anything from the H8/300 world" * 'hash' of git://ftp.sciencehorizons.net/linux: h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h> -
George Spelvin authored
This will improve the performance of hash_32() and hash_64(), but due to complete lack of multi-bit shift instructions on H8, performance will still be bad in surrounding code. Designing H8-specific hash algorithms to work around that is a separate project. (But if the maintainers would like to get in touch...) Signed-off-by: -
George Spelvin authored
Microblaze is an FPGA soft core that can be configured various ways. If it is configured without a multiplier, the standard __hash_32() will require a call to __mulsi3, which is a slow software loop. Instead, use a shift-and-add sequence for the constant multiply. GCC knows how to do this, but it's not as clever as some. Signed-off-by: -
George Spelvin authored
This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647 for the original mc68000, which lacks a 32x32-bit multiply instruction. Yes, the amount of optimization effort put in is excessive. :-) Shift-add chain found by Yevgen Voronenko's Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.htmlSigned-off-by:
-
