- 29 Aug, 2017 2 commits
-
-
Dong Aisheng authored
IMX Timer/PWM Module (TPM) supports both timer and pwm function while this patch only adds the timer support. PWM would be added later. The TPM counter, compare and capture registers are clocked by an asynchronous clock that can remain enabled in low power modes. NOTE: We observed in a very small probability, the bus fabric contention between GPU and A7 may results a few cycles delay of writing CNT registers which may cause the min_delta event got missed, so we need add a ETIME check here in case it happened. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com> Cc: Bai Ping <ping.bai@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-
Dong Aisheng authored
Adding NXP Low Power Timer/Pulse Width Modulation Module (TPM) binding doc. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Bai Ping <ping.bai@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-
- 20 Aug, 2017 1 commit
-
-
Thomas Gleixner authored
Merge branch 'fortglx/4.14/time' of https://git.linaro.org/people/john.stultz/linux into timers/core Pull timekeepig updates from John Stultz - kselftest improvements - Use the proper timekeeper in the debug code - Prevent accessing an unavailable wakeup source in the alarmtimer sysfs interface.
-
- 18 Aug, 2017 1 commit
-
-
Krzysztof Opasiak authored
Use rlimit() and rlimit_max() helper instead of manually writing whole chain from task to rlimit value Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170705172548.7911-1-k.opasiak@samsung.com
-
- 17 Aug, 2017 6 commits
-
-
Geert Uytterhoeven authored
Currently the alarmtimer registers a wake-up source unconditionally, regardless of the system having a (wake-up capable) RTC or not. Hence the alarmtimer will always show up in /sys/kernel/debug/wakeup_sources, even if it is not available, and thus cannot be a wake-up source. To fix this, postpone registration until a wake-up capable RTC device is added. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: John Stultz <john.stultz@linaro.org>
-
Stafford Horne authored
When CONFIG_DEBUG_TIMEKEEPING is enabled the timekeeping_check_update() function will update status like last_warning and underflow_seen on the timekeeper. If there are issues found this state is used to rate limit the warnings that get printed. This rate limiting doesn't really really work if stored in real_tk as the shadow timekeeper is overwritten onto real_tk at the end of every update_wall_time() call, resetting last_warning and other statuses. Fix rate limiting by using the shadow_timekeeper for timekeeping_check_update(). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Fixes: commit 57d05a93 ("time: Rework debugging variables so they aren't global") Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
-
Greg Hackmann authored
These testcases are motivated by a recent alarmtimer regression, which caused one-shot CLOCK_{BOOTTIME,REALTIME}_ALARM timers to become periodic timers. The new testcases are very similar to the existing testcases for repeating timers. But rather than waiting for 5 alarms, they wait for 5 seconds and verify that the alarm fired exactly once. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
-
Greg Hackmann authored
Rather than printing an error inside the alarm signal handler, set a flag that we check later. This keeps the test from spamming the console every time the alarm fires early. It also fixes the test exiting with error code 0 if this was the only test failure. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
-
John Stultz authored
Fixes the following build warning: freq-step.c: In function ‘main’: freq-step.c:271:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ By returning the return values from ksft_success/fail. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org>
-
John Stultz authored
On some systems, the kernel headers haven't been updated to include ADJ_SETOFFSET, so define it in the test if needed. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org>
-
- 13 Aug, 2017 7 commits
-
-
Linus Torvalds authored
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes: - compressed boot: Ignore a generated .c file - VDSO: Fix a register clobber list - DECstation: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression - Octeon: Fix recent cleanups that cleaned away a bit too much thus breaking the arch side of the EDAC and USB drivers. - uasm: Fix duplicate const in "const struct foo const bar[]" which GCC 7.1 no longer accepts. - Fix race on setting and getting cpu_online_mask - Fix preemption issue. To do so cleanly introduce macro to get the size of L3 cache line. - Revert include cleanup that sometimes results in build error - MicroMIPS uses bit 0 of the PC to indicate microMIPS mode. Make sure this bit is set for kernel entry as well. - Prevent configuring the kernel for both microMIPS and MT. There are no such CPUs currently and thus the combination is unsupported and results in build errors. This has been sitting in linux-next for a few days and has survived automated testing by Imagination's test farm. No known regressions pending except a number of issues that crept up due to lots of people switching to GCC 7.1" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Set ISA bit in entry-y for microMIPS kernels MIPS: Prevent building MT support for microMIPS kernels MIPS: PCI: Fix smp_processor_id() in preemptible MIPS: Introduce cpu_tcache_line_size MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression MIPS: VDSO: Fix clobber lists in fallback code paths Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>." MIPS: OCTEON: Fix USB platform code breakage. MIPS: Octeon: Fix broken EDAC driver. MIPS: gitignore: ignore generated .c files MIPS: Fix race on setting and getting cpu_online_mask MIPS: mm: remove duplicate "const" qualifier on insn_table
-
Linus Torvalds authored
Merge tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three firmware core fixes for 4.13-rc5. All three of these fix reported issues and have been floating around for a few weeks. They have been in linux-next with no reported problems" * tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: avoid invalid fallback aborts by using killable wait firmware: fix batched requests - send wake up on failure on direct lookups firmware: fix batched requests - wake all waiters
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are two patches for 4.13-rc5. One is a fix for a reported thunderbolt issue, and the other a fix for an MEI driver issue. Both have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Do not enumerate more ports from DROM than the controller has mei: exclude device from suspend direct complete optimization
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are two tty serial driver fixes for 4.13-rc5. One is a revert of a -rc1 patch that turned out to not be a good idea, and the other is a fix for the pl011 serial driver. Both have been in linux-next with no reported issues" * tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: Delete dead code for CIR serial ports" tty: pl011: fix initialization order of QDF2400 E44
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/iio fixes from Greg KH: "Here are some Staging and IIO driver fixes for 4.13-rc5. Nothing major, just a number of small fixes for reported issues. All of these have been in linux-next for a while now with no reported issues. Full details are in the shortlog" * tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING iio: aspeed-adc: wait for initial sequence. iio: accel: bmc150: Always restore device to normal mode after suspend-resume staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read iio: adc: axp288: Fix the GPADC pin reading often wrongly returning 0 iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits iio: accel: st_accel: add SPI-3wire support iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications" iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable iio: pressure: st_pressure_core: disable multiread by default for LPS22HB iio: light: tsl2563: use correct event code
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes and new device ids for 4.13-rc5. There is the usual gadget driver fixes, some new quirks for "messy" hardware, and some new device ids. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: pl2303: add new ATEN device id usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter USB: Check for dropped connection before switching to full speed usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume usb: renesas_usbhs: gadget: fix unused-but-set-variable warning usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3 usb: phy: phy-msm-usb: Fix usage of devm_regulator_bulk_get() usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets USB: serial: option: add D-Link DWM-222 device ID usb: musb: fix tx fifo flush handling again usb: core: unlink urbs from the tail of the endpoint's urb_list usb-storage: fix deadlock involving host lock and scsi_done uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069 USB: hcd: Mark secondary HCD as dead if the primary one died USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
-
- 12 Aug, 2017 4 commits
-
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull another MTD fix from Brian Norris: "An mtdblock regression occurred in -rc1 (all writes were broken!), in the process of some block subsystem refactoring. Noticed and fixed last week, but I'm a little slow on the uptake" * tag 'for-linus-20170812' of git://git.infradead.org/linux-mtd: mtd: blkdevs: Fix mtd block write failure
-
Abhishek Sahu authored
All the MTD block write requests are failing with following error messages mkfs.ext4 /dev/mtdblock0 print_req_error: I/O error, dev mtdblock0, sector 0 Buffer I/O error on dev mtdblock0, logical block 0, lost async page write The control is going to default case after block write request because of missing return. Fixes: commit 2a842aca ("block: introduce new block status code type") Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "The highlights include: - Fix iscsi-target payload memory leak during ISCSI_FLAG_TEXT_CONTINUE (Varun Prakash) - Fix tcm_qla2xxx incorrect use of tcm_qla2xxx_free_cmd during ABORT (Pascal de Bruijn + Himanshu Madhani + nab) - Fix iscsi-target long-standing issue with parallel delete of a single network portal across multiple target instances (Gary Guo + nab) - Fix target dynamic se_node GPF during uncached shutdown regression (Justin Maggard + nab)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix node_acl demo-mode + uncached dynamic shutdown regression iscsi-target: Fix iscsi_np reset hung task during parallel delete qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2) cxgbit: fix sg_nents calculation iscsi-target: fix invalid flags in text response iscsi-target: fix memory leak in iscsit_setup_text_cmd() cxgbit: add missing __kfree_skb() tcmu: free old string on reconfig tcmu: Fix possible to/from address overflow when doing the memcpy
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Some fixes for Xen: - a fix for a regression introduced in 4.13 for a Xen HVM-guest configured with KASLR - a fix for a possible deadlock in the xenbus driver when booting the system - a fix for lost interrupts in Xen guests" * tag 'for-linus-4.13b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: Fix interrupt lost during irq_disable and irq_enable xen: avoid deadlock in xenbus xen: fix hvm guest with kaslr enabled xen: split up xen_hvm_init_shared_info() x86: provide an init_mem_mapping hypervisor hook
-
- 11 Aug, 2017 17 commits
-
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Anna Schumaker: "A few more NFS client bugfixes from me for rc5. Dros has a stable fix for flexfiles to prevent leaking the nfs4_ff_ds_version arrays when freeing a layout, Trond fixed a potential recovery loop situation with the TEST_STATEID operation, and Christoph fixed up the pNFS blocklayout Kconfig options to prevent unsafe use with kernels that don't have large block device support. Summary: Stable fix: - fix leaking nfs4_ff_ds_version array Other fixes: - improve TEST_STATEID OLD_STATEID handling to prevent recovery loop - require 64-bit sector_t for pNFS blocklayout to prevent 32-bit compile errors" * tag 'nfs-for-4.13-5' of git://git.linux-nfs.org/projects/anna/linux-nfs: pnfs/blocklayout: require 64-bit sector_t NFSv4: Ignore NFS4ERR_OLD_STATEID in nfs41_check_open_stateid() nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A set of fixes that should go into this series. This contains: - Fix from Bart for blk-mq requeue queue running, preventing a continued loop of run/restart. - Fix for a bio/blk-integrity issue, in two parts. One from Christoph, fixing where verification happens, and one from Milan, for a NULL profile. - NVMe pull request, most of the changes being for nvme-fc, but also a few trivial core/pci fixes" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: fix directive command numd calculation nvme: fix nvme reset command timeout handling nvme-pci: fix CMB sysfs file removal in reset path lpfc: support nvmet_fc defer_rcv callback nvmet_fc: add defer_req callback for deferment of cmd buffer return nvme: strip trailing 0-bytes in wwid_show block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time bio-integrity: only verify integrity on the lowest stacked driver bio-integrity: Fix regression if profile verify_fn is NULL
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - fix lockdep splat when removing mmc_block module - fix the logic for setting eMMC HS400ES signal voltage MMC host: - omap_hsmmc: add CMD23 capability to fix -EIO errors" * tag 'mmc-v4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: fix lockdep splat when removing mmc_block module mmc: mmc: correct the logic for setting HS400ES signal voltage mmc: host: omap_hsmmc: Add CMD23 capability to omap_hsmmc driver
-
git://github.com/bzolnier/linuxLinus Torvalds authored
Pull fbdev fixes from Bartlomiej Zolnierkiewicz: - allow user to disable write combined mapping in efifb driver (Dave Airlie) - fix use after free bugs on driver removal in imxfb driver (Dan Carpenter) - fix unused variable warning in omapfb driver (Arnd Bergmann) * tag 'fbdev-v4.13-rc5' of git://github.com/bzolnier/linux: efifb: allow user to disable write combined mapping. fbdev: omapfb: remove unused variable video: fbdev: imxfb: use after free in imxfb_remove()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse fixes from Miklos Szeredi: "Fix a few bugs in fuse" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: set mapping error in writepage_locked when it fails fuse: Dont call set_page_dirty_lock() for ITER_BVEC pages for async_dio fuse: initialize the flock flag in fuse_file on allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fix from Joerg Roedel: "Fix a NULL-pointer dereference in arm_smmu_add_device" * tag 'iommu-fixes-v4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: fix null-pointer dereference in arm_smmu_add_device
-
Christoph Hellwig authored
The blocklayout code does not compile cleanly for a 32-bit sector_t, and also has no reliable checks for devices sizes, which makes it unsafe to use with a kernel that doesn't support large block devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5c83746a ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing") Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "All fixes for code that went in this cycle. - a revert of an optimisation to the syscall exit path, which could lead to an oops on either older machines or machines with > 1TB of memory - disable some deep idle states if the firmware configuration for them fails - re-enable HARD/SOFT lockup detectors in defconfigs after a Kconfig change - six fairly small patches fixing bugs in our new watchdog code Thanks to: Gautham R Shenoy, Nicholas Piggin" * tag 'powerpc-4.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/watchdog: add locking around init/exit functions powerpc/watchdog: Fix marking of stuck CPUs powerpc/watchdog: Fix final-check recovered case powerpc/watchdog: Moderate touch_nmi_watchdog overhead powerpc/watchdog: Improve watchdog lock primitive powerpc: NMI IPI improve lock primitive powerpc/configs: Re-enable HARD/SOFT lockup detectors powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT states when stop-api fails Revert "powerpc/64: Avoid restore_math call if possible in syscall exit"
-
Artem Savkov authored
Commit c54451a5 "iommu/arm-smmu: Fix the error path in arm_smmu_add_device" removed fwspec assignment in legacy_binding path as redundant which is wrong. It needs to be updated after fwspec initialisation in arm_smmu_register_legacy_master() as it is dereferenced later. Without this there is a NULL-pointer dereference panic during boot on some hosts. Signed-off-by: Artem Savkov <asavkov@redhat.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
-
Liu Shuo authored
Here is a device has xen-pirq-MSI interrupt. Dom0 might lost interrupt during driver irq_disable/irq_enable. Here is the scenario, 1. irq_disable -> disable_dynirq -> mask_evtchn(irq channel) 2. dev interrupt raised by HW and Xen mark its evtchn as pending 3. irq_enable -> startup_pirq -> eoi_pirq -> clear_evtchn(channel of irq) -> clear pending status 4. consume_one_event process the irq event without pending bit assert which result in interrupt lost once 5. No HW interrupt raising anymore. Now use enable_dynirq for enable_pirq of xen_pirq_chip to remove eoi_pirq when irq_enable. Signed-off-by: Liu Shuo <shuo.a.liu@intel.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
-
Juergen Gross authored
When starting the xenwatch thread a theoretical deadlock situation is possible: xs_init() contains: task = kthread_run(xenwatch_thread, NULL, "xenwatch"); if (IS_ERR(task)) return PTR_ERR(task); xenwatch_pid = task->pid; And xenwatch_thread() does: mutex_lock(&xenwatch_mutex); ... event->handle->callback(); ... mutex_unlock(&xenwatch_mutex); The callback could call unregister_xenbus_watch() which does: ... if (current->pid != xenwatch_pid) mutex_lock(&xenwatch_mutex); ... In case a watch is firing before xenwatch_pid could be set and the callback of that watch unregisters a watch, then a self-deadlock would occur. Avoid this by setting xenwatch_pid in xenwatch_thread(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "A few more small fixes - the fc/lpfc update is the biggest by far."
-
Juergen Gross authored
A Xen HVM guest running with KASLR enabled will die rather soon today because the shared info page mapping is using va() too early. This was introduced by commit a5d5f328 ("xen: allocate page for shared info page from low memory"). In order to fix this use early_memremap() to get a temporary virtual address for shared info until va() can be used safely. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
-
Juergen Gross authored
Instead of calling xen_hvm_init_shared_info() on boot and resume split it up into a boot time function searching for the pfn to use and a mapping function doing the hypervisor mapping call. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
-
Juergen Gross authored
Provide a hook in hypervisor_x86 called after setting up initial memory mapping. This is needed e.g. by Xen HVM guests to map the hypervisor shared info page. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
-
Jeff Layton authored
This ensures that we see errors on fsync when writeback fails. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing too earth shattering here, it just seems like lots of little things all over the place. msm has probably the larger amount of changes, but they all seem fine, otherwise, some rockchip, i915, etnaviv and exynos fixes, along with one nouveau regression fix for some older GPUs" * tag 'drm-fixes-for-v4.13-rc5' of git://people.freedesktop.org/~airlied/linux: (35 commits) drm/nouveau/disp/nv04: avoid creation of output paths drm: make DRM_STM default n drm/exynos: forbid creating framebuffers from too small GEM buffers drm/etnaviv: Fix off-by-one error in reloc checking drm/i915: fix backlight invert for non-zero minimum brightness drm/i915/shrinker: Wrap need_resched() inside preempt-disable drm/i915/perf: fix flex eu registers programming drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut drm/i915/gvt: Change the max length of mmio_reg_rw from 4 to 8 drm/i915/gvt: Initialize MMIO Block with HW state drm/rockchip: vop: report error when check resource error drm/rockchip: vop: round_up pitches to word align drm/rockchip: vop: fix NV12 video display error drm/rockchip: vop: fix iommu page fault when resume drm/i915/gvt: clean workload queue if error happened drm/i915/gvt: change resetting to resetting_eng drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations drm/msm: gpu: call qcom_mdt interfaces only for ARCH_QCOM drm/msm/adreno: Prevent unclocked access when retrieving timestamps drm/msm: Remove __user from __u64 data types ...
-
- 10 Aug, 2017 2 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "21 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits) userfaultfd: replace ENOSPC with ESRCH in case mm has gone during copy/zeropage zram: rework copy of compressor name in comp_algorithm_store() rmap: do not call mmu_notifier_invalidate_page() under ptl mm: fix list corruptions on shmem shrinklist mm/balloon_compaction.c: don't zero ballooned pages MAINTAINERS: copy virtio on balloon_compaction.c mm: fix KSM data corruption mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem mm: make tlb_flush_pending global mm: refactor TLB gathering API Revert "mm: numa: defer TLB flush for THP migration as long as possible" mm: migrate: fix barriers around tlb_flush_pending mm: migrate: prevent racy access to tlb_flush_pending fault-inject: fix wrong should_fail() decision in task context test_kmod: fix small memory leak on filesystem tests test_kmod: fix the lock in register_test_dev_kmod() test_kmod: fix bug which allows negative values on two config options test_kmod: fix spelling mistake: "EMTPY" -> "EMPTY" userfaultfd: hugetlbfs: remove superfluous page unlock in VM_SHARED case mm: ratelimit PFNs busy info message ...
-
Mike Rapoport authored
When the process exit races with outstanding mcopy_atomic, it would be better to return ESRCH error. When such race occurs the process and it's mm are going away and returning "no such process" to the uffd monitor seems better fit than ENOSPC. Link: http://lkml.kernel.org/r/1502111545-32305-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-