- 11 Jun, 2018 1 commit
-
-
Ville Syrjälä authored
Instead of looking at plane->fb let's look at the proper new plane state. Not that the code makes a ton of sense. It's only going through the crtcs in the atomic state, so assuming not all of them are included we're not even calculating the total bandwidth here. Also we're not considering whether each crtc is actually enabled or not. Cc: Deepak Rawat <drawat@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-2-ville.syrjala@linux.intel.comReviewed-by:
Sinclair Yeh <syeh@vmware.com>
-
- 02 Jun, 2018 1 commit
-
-
Lubosz Sarnecki authored
This adds the Vive Pro's EDID information and sets EDID_QUIRK_NON_DESKTOP. Signed-off-by:
Lubosz Sarnecki <lubosz.sarnecki@collabora.com> Signed-off-by:
Daniel Stone <daniels@collabora.com> Reviewed-by:
-
- 01 Jun, 2018 1 commit
-
-
Gerd Hoffmann authored
So drivers don't need dummy functions just returning NULL. Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180529135918.19729-1-kraxel@redhat.com
-
- 31 May, 2018 3 commits
-
-
Dave Stevenson authored
This is the format generated by VC4's H.264 engine, and preferred by the ISP as well. By displaying SAND buffers directly, we can avoid needing to use the ISP to rewrite the SAND H.264 output to linear before display. This is a joint effort by Dave Stevenson (who wrote the initial patch and DRM demo) and Eric Anholt (drm_fourcc.h generalization, safety checks, RGBA support). v2: Make the parameter macro give all of the middle 48 bits (suggested by Daniels). Fix fourcc_mod_broadcom_mod()'s bits/shift being swapped. Mark NV12/21 as supported, not YUV420. Signed-off-by:Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by: Daniel Stone <daniels@collabora.com> (v1) Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-3-eric@anholt.net
-
Eric Anholt authored
Daniel's format_mod_supported() patch predated Dave's for NV21/61, and I didn't catch that when rebasing. This is a problem since the formats are now getting validated before being passed to the driver's atomic hooks. Signed-off-by:
-
Eric Anholt authored
For parameterized modifiers (Broadcom's SAND and UIF), we need to allow the parameter fields to be filled in, while exposing only the variant of the modifier with the parameter unfilled in the internal arrays and the format blob. Signed-off-by:
-
- 30 May, 2018 1 commit
-
-
Ville Syrjälä authored
Up to now we've used the plane's modifier list as the primary source of information for which modifiers are supported by a given plane. In order to allow auxiliary metadata to be embedded within the bits of the modifier we need to stop doing that. Thus we have to make .format_mod_supported() aware of the plane's capabilities and gracefully deal with any modifier being passed in directly from userspace. v2: Rebase after NV12 Simplify Cc: Eric Anholt <eric@anholt.net> References: https://lists.freedesktop.org/archives/dri-devel/2018-March/169782.htmlSigned-off-by:
-
- 29 May, 2018 2 commits
-
-
Lukasz Majewski authored
This commit adds support for AUO's 7.0" display. Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180514190849.18723-1-lukma@denx.de
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. commit 1c8f4220 ("mm: change return type to vm_fault_t") Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
- 28 May, 2018 2 commits
-
-
Daniel Vetter authored
Copypasta mistake. Fixes: 742547b7 ("drm/fb_helper: Create wrappers for blit, copyarea and fillrect funcs") Cc: Archit Taneja <architt@codeaurora.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Acked-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180524090105.21196-1-daniel.vetter@ffwll.ch
-
Arnd Bergmann authored
Disabling CONFIG_PM produces a compile time warning when these functions are not referenced: drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:1072:12: error: 'sun6i_dsi_runtime_suspend' defined but not used [-Werror=unused-function] static int sun6i_dsi_runtime_suspend(struct device *dev) ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:1043:12: error: 'sun6i_dsi_runtime_resume' defined but not used [-Werror=unused-function] static int sun6i_dsi_runtime_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 133add5b ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525155030.3667352-1-arnd@arndb.de
-
- 25 May, 2018 9 commits
-
-
Ville Syrjälä authored
We want to get rid of plane->fb on atomic drivers. Stop looking at it. Daniel pointed out that the drm_framebuffer_put() in the plane cleanup indicates that the driver doesn't shut things down cleanly. To do that we should be able to just call drm_atomic_helper_shutdown(). Not really sure the current cleanup sequence is actually sane, but whatever. v2: Replace the drm_framebuffer_put() with drm_atomic_helper_shutdown() (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: -
Ville Syrjälä authored
omap_framebuffer_get_next_connector() uses plane->fb which we want to deprecate for atomic drivers. As omap_framebuffer_get_next_connector() is unused just nuke the entire function. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Ville Syrjälä authored
Clean up the ugly tmp->primary-> stuff in __drm_mode_set_config_internal() with a local plane variable. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Suggested-by:
-
Ville Syrjälä authored
We want to get rid of plane->crtc on atomic drivers. Stop looking at it. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Ville Syrjälä authored
We want to get rid of plane->crtc on atomic drivers. Stop looking at it. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
We want to get rid of plane->fb/crtc on atomic drivers. Stop looking at them. v2: Catch the plane->crtc case too Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by:
-
Ville Syrjälä authored
We want to stop using plane->fb with atomic driver, so stop looking at it. I have no idea what this code is trying to achieve. There is no corresponding check in the enable path. Also since arc_pgu_set_pxl_fmt() will anyway oops if there is no fb I'm going to assuming that I can just remove the check entirely. There seems to be a general shortage of .atomic_check() in this driver... Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Alexey Brodkin <abrodkin@synopys.com>
-
Ville Syrjälä authored
Fix up a bunch of bad indentation and insconsistent comments in edid_cea_modes[]. v2: Instead of stripping the aspect ratio comments let's add them to all modes Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Oleksandr Andrushchenko authored
Building for a 32-bit target results in warnings from casting between a 32-bit pointer and a 64-bit integer. Fix the warnings by casting those pointers to uintptr_t first. Signed-off-by:
Juergen Gross <jgross@suse.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180523113630.29811-1-andr2000@gmail.com
-
- 24 May, 2018 5 commits
-
-
Chris Wilson authored
If we can use an unmappable ring, try to pin it out of the mappable aperture. This simple layout preference is to try and keep the mappable aperture reserved and available to handle GGTT mmapping requests from userspace without causing evictions and GPU stalls. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180521082131.13744-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
To no surprise (since we've flip-flopped over the use of PIN_HIGH a few times), doing a search by address over a pathologically fragmented address space is exceeding slow. To protect ourselves from nearly unbounded latency (think searching a million holes while under struct_mutex), limit the search for the highest available hole and fallback to best-fit if it fails. In the pathologically fragmented case, such as igt/gem_ctx_thrash, the effect is dramatic, bringing the runtime down from hours to seconds (depending on how many other slow searches you hit, e.g. alloc_iova() and alloc_vmap_area() both degrade to a slow rbtree walk after their small cache is exhausted). For the real world, the number of search steps is unlikely to be significant as we should only need to search once per new context. Signed-off-by:
-
Chris Wilson authored
Searching for an available hole by address is slow, as there no guarantee that a hole will be available and so we must walk over all nodes in the rbtree before we determine the search was futile. In many cases, the caller doesn't strictly care for the highest available hole and was just opportunistically laying out the address space in a preferred order. In such cases, the caller can accept any address and would rather do so then do a slow walk. To be able to mix search strategies, the caller wants to tell the drm_mm how long to spend on the search. Without a good guide for what should be the best split, start with a request to try once at most. That is return the top-most (or lowest) hole if it fulfils the alignment and size requirements. v2: Documentation, by why of example (selftests) and kerneldoc. Signed-off-by:
-
Chris Wilson authored
As we keep an rbtree of available holes sorted by their size, we can very easily determine if there is any hole large enough that might satisfy the allocation request. This helps when dealing with a highly fragmented address space and a request for a search by address. To cache the largest size, we convert into the cached rbtree variant which tracks the leftmost node for us. However, currently we sorted into ascending size order so the leftmost node is the smallest, and so to make it the largest hole we need to invert our sorting. Signed-off-by:
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler. Signed-off-by:
-
- 23 May, 2018 3 commits
-
-
Souptick Joarder authored
Use new return type vm_fault_t for fault and huge_fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Commit 1c8f4220 ("mm: change return type to vm_fault_t") Previously vm_insert_page() returns err which driver mapped into VM_FAULT_* type. The new function vmf_ insert_page() will replace this inefficiency by returning VM_FAULT_* type. Signed-off-by:
-
Laura Abbott authored
There's an ongoing effort to remove VLAs[1] from the kernel to eventually turn on -Wvla. The vla in reg_write_range is based on the length of data passed. The one use of a non-constant size for this range is bounded by the size buffer passed to hdmi_infoframe_pack which is a fixed size. Switch to this upper bound. [1] https://lkml.org/lkml/2018/3/7/621Signed-off-by:
Laura Abbott <labbott@redhat.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Laura Abbott authored
There's an ongoing effort to remove VLAs[1] from the kernel to eventually turn on -Wvla. Switch to a reasonable upper bound for the VLAs in the gma500 driver. [1] https://lkml.org/lkml/2018/3/7/621Signed-off-by:
-
- 22 May, 2018 3 commits
-
-
Daniel Stone authored
Commit bc61c975 ("drm/gma500: Move GEM BO to drm_framebuffer") moved the gtt_range structure, from being in psb_framebuffer and embedding the GEM object, to being placed in the drm_framebuffer with the gtt_range being derived from the GEM object. The conversion missed out the Medfield subdriver, which was not being built in the default drm-misc config. Do the trivial fixup here. Signed-off-by:
kbuild test robot <lkp@intel.com> Reviewed-by:
-
Daniel Stone authored
drm_framebuffer already holds per-plane pitch and offsets, which is filled out for us when we create the framebuffer. Nuke our local copy in the plane struct. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180330141138.28987-7-daniels@collabora.com
-
Daniel Stone authored
Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. As this makes the framebuffer create_handle and destroy functions the same as the GEM framebuffer helper, we can reuse those. Signed-off-by:
-
- 21 May, 2018 1 commit
-
-
Dan Carpenter authored
The v3d_fence_create() only returns error pointers on error. It never returns NULL. Fixes: 57692c94 ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 20 May, 2018 1 commit
-
-
Peter Rosin authored
drm_bridge_attach takes care of these assignments, so there is no need to open-code them a second time. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180502074025.12421-3-peda@axentia.se
-
- 18 May, 2018 7 commits
-
-
Daniel Stone authored
Now that rockchip_drm_fb is just a wrapper around drm_framebuffer, we can remove it. Signed-off-by:
Sean Paul <seanpaul@chromium.org> Acked-by:
-
Daniel Stone authored
Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. As this makes the framebuffer create_handle and destroy functions the same as the GEM framebuffer helper, we can reuse those. Signed-off-by:
-
Daniel Stone authored
Now that mtk_drm_fb is an empty wrapper around drm_framebuffer, we can just delete it. Signed-off-by:
CK Hu <ck.hu@mediatek.com> Reviewed-by:
-
Daniel Stone authored
Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. As this makes the framebuffer create_handle and destroy functions the same as the GEM framebuffer helper, we can reuse those. Signed-off-by:
-
Daniel Stone authored
We cannot create a framebuffer with no objects, so there's no point testing for it. v2: Remove the error entirely. (Sean, CK, Thierry) Signed-off-by:
-
Daniel Stone authored
Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. As this makes the framebuffer create_handle function the same as the GEM framebuffer helper, we can reuse that. Signed-off-by:
-
Daniel Stone authored
Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. As this makes the framebuffer create_handle and destroy functions the same as the GEM framebuffer helper, we can reuse those. Signed-off-by:
-
