- 22 Sep, 2017 6 commits
-
-
Colin Ian King authored
In the case where mbox_status is OCRDMA_MBX_STATUS_FAILED and add_status is OCRDMA_MBX_STATUS_FAILED err_num is assigned -EAGAIN however the case OCRDMA_MBX_STATUS_FAILED is missing a break and falls through to the default case which then re-assigns err_num to -EFAULT. Fix this so that err_num is assigned to -EAGAIN for the add_status OCRDMA_MBX_STATUS_FAILED case and -EFAULT otherwise. Detected by CoverityScan CID#703125 ("Missing break in switch") Fixes: fe2caefc ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Santosh Shilimkar authored
IPoIB doesn't support transport/rnr retry schemes as per RFC so those errors are expected. No need to flood the log files with them. Tested-by:
Michael Nowak <michael.nowak@oracle.com> Tested-by:
Rafael Alejandro Peralez <rafael.peralez@oracle.com> Tested-by:
Liwen Huang <liwen.huang@oracle.com> Tested-by:
Hong Liu <hong.x.liu@oracle.com> Reviewed-by:
Mukesh Kacker <mukesh.kacker@oracle.com> Reported-by:
Rajiv Raja <rajiv.raja@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Steve Wise authored
If a listen create fails, then the server tid (stid) is incorrectly left in the stid idr table, which can cause a touch-after-free if the stid is looked up and the already freed endpoint is touched. So make sure and remove it in the error path. Cc: stable@vger.kernel.org Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Steve Wise authored
If the thread waiting for a CLOSE_LISTSRV_RPL times out and bails, then we need to handle a subsequent CPL if it arrives and the stid has been released. In this case silently drop it. Cc: stable@vger.kernel.org Signed-off-by:
-
Steve Wise authored
The listening endpoint should always be dereferenced at the end of pass_accept_req(). Fixes: f86fac79 ("RDMA/iw_cxgb4: atomic find and reference for listening endpoints") Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Estrin authored
Build with the latest patches resulted in panic: 11384.486289] BUG: unable to handle kernel NULL pointer dereference at (null) [11384.486293] IP: (null) [11384.486295] PGD 0 [11384.486295] P4D 0 [11384.486296] [11384.486299] Oops: 0010 [#1] SMP ......... snip ...... [11384.486401] CPU: 0 PID: 968 Comm: kworker/0:1H Tainted: G W O 4.13.0-a-stream-20170825 #1 [11384.486402] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015 [11384.486418] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] [11384.486419] task: ffff880850579680 task.stack: ffffc90007fec000 [11384.486420] RIP: 0010: (null) [11384.486420] RSP: 0018:ffffc90007fef970 EFLAGS: 00010206 [11384.486421] RAX: ffff88084cfe8000 RBX: ffff88084dce4000 RCX: ffffc90007fef978 [11384.486422] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88084cfe8000 [11384.486422] RBP: ffffc90007fefab0 R08: 0000000000000000 R09: ffff88084dce4080 [11384.486423] R10: ffffffffa02d7f60 R11: 0000000000000000 R12: ffff88105af65a00 [11384.486423] R13: ffff88084dce4000 R14: 000000000000c000 R15: 000000000000c000 [11384.486424] FS: 0000000000000000(0000) GS:ffff88085f400000(0000) knlGS:0000000000000000 [11384.486425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11384.486425] CR2: 0000000000000000 CR3: 0000000001c09000 CR4: 00000000001406f0 [11384.486426] Call Trace: [11384.486431] ? is_valid_mcast_lid.isra.21+0xfb/0x110 [ib_core] [11384.486436] ib_attach_mcast+0x6f/0xa0 [ib_core] [11384.486441] ipoib_mcast_attach+0x81/0x190 [ib_ipoib] [11384.486443] ipoib_mcast_join_complete+0x354/0xb40 [ib_ipoib] [11384.486448] mcast_work_handler+0x330/0x6c0 [ib_core] [11384.486452] join_handler+0x101/0x220 [ib_core] [11384.486455] ib_sa_mcmember_rec_callback+0x54/0x80 [ib_core] [11384.486459] recv_handler+0x3a/0x60 [ib_core] [11384.486462] ib_mad_recv_done+0x423/0x9b0 [ib_core] [11384.486466] __ib_process_cq+0x5d/0xb0 [ib_core] [11384.486469] ib_cq_poll_work+0x20/0x60 [ib_core] [11384.486472] process_one_work+0x149/0x360 [11384.486474] worker_thread+0x4d/0x3c0 [11384.486487] kthread+0x109/0x140 [11384.486488] ? rescuer_thread+0x380/0x380 [11384.486489] ? kthread_park+0x60/0x60 [11384.486490] ? kthread_park+0x60/0x60 [11384.486493] ret_from_fork+0x25/0x30 [11384.486493] Code: Bad RIP value. [11384.486493] Code: Bad RIP value. [11384.486496] RIP: (null) RSP: ffffc90007fef970 [11384.486497] CR2: 0000000000000000 [11384.486531] ---[ end trace b1acec6fb4ff6e75 ]--- [11384.532133] Kernel panic - not syncing: Fatal exception [11384.536541] Kernel Offset: disabled [11384.969491] ---[ end Kernel panic - not syncing: Fatal exception [11384.976875] sched: Unexpected reschedule of offline CPU#1! [11384.983646] ------------[ cut here ]------------ Rdma device driver may not have implemented (*get_link_layer)() so it can not be called directly. Should use appropriate helper function. Reviewed-by:Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
-
- 31 Aug, 2017 15 commits
-
-
Matan Barak authored
Add CONFIG_INFINIBAND_EXP_USER_ACCESS that enables the ioctl interface. This interface is experimental and is subject to change. Signed-off-by:
Matan Barak <matanb@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Matan Barak authored
In order to use the parsing tree, we need to assign the root to all drivers. Currently, we just assign the default parsing tree via ib_uverbs_add_one. The driver could override this by assigning a parsing tree prior to registering the device. Signed-off-by:
-
Matan Barak authored
Adding CQ ioctl actions: 1. create_cq 2. destroy_cq This requires adding the following: 1. A specification describing the method a. Handler b. Attributes specification Each attribute is one of the following: a. PTR_IN - input data Note: This could be encoded inlined for data < 64bit b. PTR_OUT - response data c. IDR - idr based object d. FD - fd based object Blobs attributes (clauses a and b) contain their type, while objects specifications (clauses c and d) contains the expected object type (for example, the given id should be UVERBS_TYPE_PD) and the required access (READ, WRITE, NEW or DESTROY). If a NEW is required, the new object's id will be assigned to this attribute. All attributes could get UA_FLAGS attribute. Currently we support stating that an attribute is mandatory or that the specification size corresponds to a lower bound (and that this attribute could be extended). We currently add both default attributes and the two generic UHW_IN and UHW_OUT driver specific attributes. 2. Handler A handler gets a uverbs_attr_bundle. The handler developer uses uverbs_attr_get to fetch an attribute of a given id. Each of these attribute groups correspond to the specification group defined in the action (clauses 1.b and 1.c respectively). The indices of these arrays corresponds to the attribute ids declared in the specifications (clause 2). The handler is quite simple. It assumes the infrastructure fetched all objects and locked, created or destroyed them as required by the specification. Pointer (or blob) attributes were validated to match their required sizes. After the handler finished, the infrastructure commits or rollbacks the objects. Signed-off-by: -
Matan Barak authored
In this phase, we don't want to change all the drivers to use flexible driver's specific attributes. Therefore, we add two default attributes: UHW_IN and UHW_OUT. These attributes are optional in some methods and they encode the driver specific command data. We add a function that extract this data and creates the legacy udata over it. Driver's data should start from UVERBS_UDATA_DRIVER_DATA_FLAG. This turns on the first bit of the namespace, indicating this attribute belongs to the driver's namespace. Signed-off-by:
-
Matan Barak authored
Add a new ib_user_ioctl_verbs.h which exports all required ABI enums and structs to the user-space. Export the default types to user-space through this file. Signed-off-by:
-
Matan Barak authored
When some objects are destroyed, we need to extract their status at destruction. After object's destruction, this status (e.g. events_reported) relies in the uobject. In order to have the latest and correct status, the underlying object should be destroyed, but we should keep the uobject alive and read this information off the uobject. We introduce a rdma_explicit_destroy function. This function destroys the class type object (for example, the IDR class type which destroys the underlying object as well) and then convert the uobject to be of a null class type. This uobject will then be destroyed as any other uobject once uverbs_finalize_object[s] is called. Signed-off-by:
-
Matan Barak authored
This patch adds macros for declaring objects, methods and attributes. These definitions are later used by downstream patches to declare some of the default types. Signed-off-by:
-
Matan Barak authored
Different drivers support different features and even subset of the common uverbs implementation. Currently, this is handled as bitmask in every driver that represents which kind of methods it supports, but doesn't go down to attributes granularity. Moreover, drivers might want to add their specific types, methods and attributes to let their user-space counter-parts be exposed to some more efficient abstractions. It means that existence of different features is validated syntactically via the parsing infrastructure rather than using a complex in-handler logic. In order to do that, we allow defining features and abstractions as parsing trees. These per-feature parsing tree could be merged to an efficient (perfect-hash based) parsing tree, which is later used by the parsing infrastructure. To sum it up, this makes a parse tree unique for a device and represents only the features this particular device supports. This is done by having a root specification tree per feature. Before a device registers itself as an IB device, it merges all these trees into one parsing tree. This parsing tree is used to parse all user-space commands. A future user-space application could read this parse tree. This tree represents which objects, methods and attributes are supported by this device. This is based on the idea of Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
Matan Barak authored
This adds the DEVICE object. This object supports creating the context that all objects are created from. Moreover, it supports executing methods which are related to the device itself, such as QUERY_DEVICE. This is a singleton object (per file instance). All standard objects are put in the root structure. This root will later on be used in drivers as the source for their whole parsing tree. Later on, when new features are added, these drivers could mix this root with other customized objects. Signed-off-by:
-
Matan Barak authored
Switch all uverbs_type_attrs_xxxx with DECLARE_UVERBS_OBJECT macros. This will be later used in order to embed the object specific methods in the objects as well. Signed-off-by:
-
Matan Barak authored
In this ioctl interface, processing the command starts from properties of the command and fetching the appropriate user objects before calling the handler. Parsing and validation is done according to a specifier declared by the driver's code. In the driver, all supported objects are declared. These objects are separated to different object namepsaces. Dividing objects to namespaces is done at initialization by using the higher bits of the object ids. This initialization can mix objects declared in different places to one parsing tree using in this ioctl interface. For each object we list all supported methods. Similarly to objects, methods are separated to method namespaces too. Namespacing is done similarly to the objects case. This could be used in order to add methods to an existing object. Each method has a specific handler, which could be either a default handler or a driver specific handler. Along with the handler, a bunch of attributes are specified as well. Similarly to objects and method, attributes are namespaced and hashed by their ids at initialization too. All supported attributes are subject to automatic fetching and validation. These attributes include the command, response and the method's related objects' ids. When these entities (objects, methods and attributes) are used, the high bits of the entities ids are used in order to calculate the hash bucket index. Then, these high bits are masked out in order to have a zero based index. Since we use these high bits for both bucketing and namespacing, we get a compact representation and O(1) array access. This is mandatory for efficient dispatching. Each attribute has a type (PTR_IN, PTR_OUT, IDR and FD) and a length. Attributes could be validated through some attributes, like: (*) Minimum size / Exact size (*) Fops for FD (*) Object type for IDR If an IDR/fd attribute is specified, the kernel also states the object type and the required access (NEW, WRITE, READ or DESTROY). All uobject/fd management is done automatically by the infrastructure, meaning - the infrastructure will fail concurrent commands that at least one of them requires concurrent access (WRITE/DESTROY), synchronize actions with device removals (dissociate context events) and take care of reference counting (increase/decrease) for concurrent actions invocation. The reference counts on the actual kernel objects shall be handled by the handlers. objects +--------+ | | | | methods +--------+ | | ns method method_spec +-----+ |len | +--------+ +------+[d]+-------+ +----------------+[d]+------------+ |attr1+-> |type | | object +> |method+-> | spec +-> + attr_buckets +-> |default_chain+--> +-----+ |idr_type| +--------+ +------+ |handler| | | +------------+ |attr2| |access | | | | | +-------+ +----------------+ |driver chain| +-----+ +--------+ | | | | +------------+ | | +------+ | | | | | | | | | | | | | | | | | | | | +--------+ [d] = Hash ids to groups using the high order bits The right types table is also chosen by using the high bits from the ids. Currently we have either default or driver specific groups. Once validation and object fetching (or creation) completed, we call the handler: int (*handler)(struct ib_device *ib_dev, struct ib_uverbs_file *ufile, struct uverbs_attr_bundle *ctx); ctx bundles attributes of different namespaces. Each element there is an array of attributes which corresponds to one namespaces of attributes. For example, in the usually used case: ctx core +----------------------------+ +------------+ | core: +---> | valid | +----------------------------+ | cmd_attr | | driver: | +------------+ |----------------------------+--+ | valid | | | cmd_attr | | +------------+ | | valid | | | obj_attr | | +------------+ | | drivers | +------------+ +> | valid | | cmd_attr | +------------+ | valid | | cmd_attr | +------------+ | valid | | obj_attr | +------------+ Signed-off-by: -
Adit Ranadive authored
Fixes: 29c8d9eb ("IB: Add vmw_pvrdma driver") Signed-off-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
-
Aditya Sarwade authored
We should report the network header type in the work completion so that the kernel can infer the right RoCE type headers. Reviewed-by:
Bryan Tan <bryantan@vmware.com> Signed-off-by:
Aditya Sarwade <asarwade@vmware.com> Signed-off-by:
-
Roland Dreier authored
For RoCE, ib_init_ah_from_wc() can follow the path ib_init_ah_from_wc() -> rdma_addr_find_l2_eth_by_grh() -> rdma_resolve_ip() and rdma_resolve_ip() will sleep in kzalloc() and wait_for_completion(). However, developers will not see any warnings if they use ib_init_ah_from_wc() in an atomic context and test only on IB, because the function doesn't sleep in that case. Add a might_sleep() so that lockdep will catch bugs no matter what hardware is used to test. Signed-off-by:Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Roland Dreier authored
A couple of places in the CM do spin_lock_irq(&cm_id_priv->lock); ... if (cm_alloc_response_msg(work->port, work->mad_recv_wc, &msg)) However when the underlying transport is RoCE, this leads to a sleeping function being called with the lock held - the callchain is cm_alloc_response_msg() -> ib_create_ah_from_wc() -> ib_init_ah_from_wc() -> rdma_addr_find_l2_eth_by_grh() -> rdma_resolve_ip() and rdma_resolve_ip() starts out by doing req = kzalloc(sizeof *req, GFP_KERNEL); not to mention rdma_addr_find_l2_eth_by_grh() doing wait_for_completion(&ctx.comp); to wait for the task that rdma_resolve_ip() queues up. Fix this by moving the AH creation out of the lock. Signed-off-by:Sean Hefty <sean.hefty@intel.com> Signed-off-by:
-
- 30 Aug, 2017 2 commits
-
-
Matan Barak authored
The new ioctl based infrastructure either commits or rollbacks all objects of the method as one transaction. In order to do that, we introduce a notion of dealing with a collection of objects that are related to a specific method. This also requires adding a notion of a method and attribute. A method contains a hash of attributes, where each bucket contains several attributes. The attributes are hashed according to their namespace which resides in the four upper bits of the id. For example, an object could be a CQ, which has an action of CREATE_CQ. This action has multiple attributes. For example, the CQ's new handle and the comp_channel. Each layer in this hierarchy - objects, methods and attributes is split into namespaces. The basic example for that is one namespace representing the default entities and another one representing the driver specific entities. When declaring these methods and attributes, we actually declare their specifications. When a method is executed, we actually allocates some space to hold auxiliary information. This auxiliary information contains meta-data about the required objects, such as pointers to their type information, pointers to the uobjects themselves (if exist), etc. The specification, along with the auxiliary information we allocated and filled is given to the finalize_objects function. Signed-off-by:
-
Matan Barak authored
The ioctl infrastructure treats all user-objects in the same manner. It gets objects ids from the user-space and by using the object type and type attributes mentioned in the object specification, it executes this required method. Passing an object id from the user-space as an attribute is carried out in three stages. The first is carried out before the actual handler and the last is carried out afterwards. The different supported operations are read, write, destroy and create. In the first stage, the former three actions just fetches the object from the repository (by using its id) and locks it. The last action allocates a new uobject. Afterwards, the second stage is carried out when the handler itself carries out the required modification of the object. The last stage is carried out after the handler finishes and commits the result. The former two operations just unlock the object. Destroy calls the "free object" operation, taking into account the object's type and releases the uobject as well. Creation just adds the new uobject to the repository, making the object visible to the application. In order to abstract these details from the ioctl infrastructure layer, we add uverbs_get_uobject_from_context and uverbs_finalize_object functions which corresponds to the first and last stages respectively. Signed-off-by:
-
- 29 Aug, 2017 11 commits
-
-
Artemy Kovalyov authored
Add document providing definitions of terms and core explanations for tag matching (TM) protocols, eager and rendezvous, TM application header, tag list manipulations and matching process. Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Artemy Kovalyov authored
Pass to mlx5_core flag to enable rendezvous offload, list_size and CQ when SRQ created with IB_SRQT_TM. Signed-off-by:
Yossi Itigin <yosefe@mellanox.com> Signed-off-by:
-
Artemy Kovalyov authored
Add support to new XRQ(eXtended shared Receive Queue) hardware object. It supports SRQ semantics with addition of extended receive buffers topologies and offloads. Currently supports tag matching topology and rendezvouz offload. Signed-off-by:
-
Artemy Kovalyov authored
Provide driver specific values for XRQ capabilities. Signed-off-by:
-
Artemy Kovalyov authored
Make XRQ capabilities available via ibv_query_device() verb. Signed-off-by:
-
Artemy Kovalyov authored
Add new SRQ type capable of new tag matching feature. When SRQ receives a message it will search through the matching list for the corresponding posted receive buffer. The process of searching the matching list is called tag matching. In case the tag matching results in a match, the received message will be placed in the address specified by the receive buffer. In case no match was found the message will be placed in a generic buffer until the corresponding receive buffer will be posted. These messages are called unexpected and their set is called an unexpected list. Signed-off-by:
-
Artemy Kovalyov authored
Add tm_list_size parameter to struct ib_uverbs_create_xsrq. If SRQ type is tag-matching this field defines maximum size of tag matching list. Otherwise, it is expected to be zero. Signed-off-by:
-
Artemy Kovalyov authored
This patch adds new SRQ type - IB_SRQT_TM. The new SRQ type supports tag matching and rendezvous offloads for MPI applications. When SRQ receives a message it will search through the matching list for the corresponding posted receive buffer. The process of searching the matching list is called tag matching. In case the tag matching results in a match, the received message will be placed in the address specified by the receive buffer. In case no match was found the message will be placed in a generic buffer until the corresponding receive buffer will be posted. These messages are called unexpected and their set is called an unexpected list. Signed-off-by:
-
Artemy Kovalyov authored
Before this change CQ attached to SRQ was part of XRC specific extension. Moving CQ handle out makes it available to other types extending SRQ functionality. Signed-off-by:
-
Artemy Kovalyov authored
This patch adds following TM XRQ capabilities: * max_rndv_hdr_size - Max size of rendezvous request message * max_num_tags - Max number of entries in tag matching list * max_ops - Max number of outstanding list operations * max_sge - Max number of SGE in tag matching entry * flags - the following flags are currently defined: - IB_TM_CAP_RC - Support tag matching on RC transport Signed-off-by: -
Artemy Kovalyov authored
* add offload_type field to mlx5_ifc_qpc_bits * update mlx5_ifc_xrqc_bits layout Signed-off-by:
-
- 28 Aug, 2017 6 commits
-
-
Andrew Boyer authored
Without this fix, ports configured on top of ixgbe miss link up notifications. ibv_query_port() will continue to return IBV_PORT_DOWN even though the port is up and working. Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
Andrew Boyer <andrew.boyer@dell.com> Signed-off-by:
-
Andrew Boyer authored
The current process is to first calculate the CRC and then copy the client data into the packet. This leaves a window in which the packet contents and CRC can get out of sync, if the client changes the data after the CRC is calculated but before the data is copied. By copying the data into the packet and then calculating the CRC directly from the packet contents we eliminate the window. This can be seen with qperf's ud_bi_bw test. This seems like very strange/reckless client behavior, but whether the client has mangled its data or not RXE should be able to transfer it reliably. Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
-
Andrew Boyer authored
This fixes another path in rxe_requester() that might overlook stale SKBs, preventing cleanup. Fixes: 12171971 ("rxe: fix broken receive queue draining") Signed-off-by:
-
Andrew Boyer authored
Fixes: 4ed6ad1e ("IB/rxe: Cache dst in QP instead of getting it...") Signed-off-by:
-
Andrew Boyer authored
Replace sk_dst_get()/dst_release() in rxe_qp_cleanup() with sk_dst_reset(). sk_dst_get() takes a new reference on dst, so the dst_release() doesn't actually release the original reference, which was the design intent. Fixes: 4ed6ad1e ("IB/rxe: Cache dst in QP instead of getting it...") Signed-off-by:
-
Andrew Boyer authored
Otherwise the reference count goes negative as IPv6 packets complete. Fixes: 4ed6ad1e ("IB/rxe: Cache dst in QP instead of getting it...") Signed-off-by:
-
