- 07 Dec, 2006 40 commits
-
-
Adam B. Jerome authored
This patch addresses incorrect symbol type information reported through /proc/kallsyms. A lowercase character should designate the symbol as local (or non-exported). An uppercase character should designate the symbol as global (or external). Without this patch, some non-exported symbols are incorrectly assigned an upper-case designation in /proc/kallsyms. This patch corrects this condition by converting non-exported symbols types to lower case when appropriate and eliminates the superfluous upcase_if_global function Signed-off-by:
Adam B. Jerome <abj@novell.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Pekka Enberg authored
Update ext4_statfs to return an FSID that is a 64 bit XOR of the 128 bit filesystem UUID as suggested by Andreas Dilger. See the following Bugzilla entry for details: http://bugzilla.kernel.org/show_bug.cgi?id=136 Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Stephen Tweedie <sct@redhat.com> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Pekka Enberg authored
Update ext3_statfs to return an FSID that is a 64 bit XOR of the 128 bit filesystem UUID as suggested by Andreas Dilger. See the following Bugzilla entry for details: http://bugzilla.kernel.org/show_bug.cgi?id=136 Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Stephen Tweedie <sct@redhat.com> Signed-off-by:
-
Pekka Enberg authored
Update ext2_statfs to return an FSID that is a 64 bit XOR of the 128 bit filesystem UUID as suggested by Andreas Dilger. See the following Bugzilla entry for details: http://bugzilla.kernel.org/show_bug.cgi?id=136 Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Stephen Tweedie <sct@redhat.com> Signed-off-by:
-
Stas Sergeev authored
Make access(X_OK) take the "noexec" mount option into account. Signed-off-by:
Stas Sergeev <stsp@aknet.ru> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Hugh Dickins <hugh@veritas.com> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Peter Zijlstra authored
Stick NFS sockets in their own class to avoid some lockdep warnings. NFS sockets are never exposed to user-space, and will hence not trigger certain code paths that would otherwise pose deadlock scenarios. [akpm@osdl.org: cleanups] Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Steven Dickson <SteveD@redhat.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Acked-by:
Neil Brown <neilb@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
Amol Lad <amol@verismonetworks.com> Signed-off-by:
-
Amol Lad authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Amol Lad authored
Signed-off-by:
-
Amol Lad authored
Signed-off-by:
-
Peter Korsgaard authored
Add a driver for the Xilinx uartlite serial controller used in boards with the PPC405 core in the Xilinx V2P/V4 fpgas. The hardware is very simple (baudrate/start/stopbits fixed and no break support). See the datasheet for details: http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf See http://thread.gmane.org/gmane.linux.serial/1237/ for the email thread. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Acked-by:
Olof Johansson <olof@lixom.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Suzuki K P authored
check_partition() stops its probe once it hits an I/O error from the partition checkers. This would prevent the actual partition checker getting a chance to verify the partition. So this patch lets check_partition() continue probing untill it hits a success while recording the I/O error which might have been reported by the checking routines. Also, it does some cleanup of the partition methods for ibm, atari and amiga to return -1 upon hitting an I/O error. Signed-off-by:
Suzuki K P <suzuki@in.ibm.com> Signed-off-by:
-
Suzuki Kp authored
The current rescan_partition implementation ignores the errors that comes from the lower layer. It reports success for unknown partitions as well as I/O error cases while reading the partition information. The unknown partition is not (and will not be) considered as an error in the kernel, since there are legal users of it (e.g, members of a RAID5 MD Device or a new disk which is not partitioned at all ). Changing this behaviour would scare the user about a serious problem with their disk and is not recommended. Thus for both "unknown partitions" to the Linux (eg., DEC VMS,Novell Netware) and the legal users of NULL partition, would still be reported as "SUCCESS". The patch attached here, scares the user about something which he does need to worry about. i.e, returning -EIO on disk I/O errors while reading the partition information. Signed-off-by:
-
Mike Miller authored
A pretty simple cleanup for cciss_interrupt_mode. Signed-off-by:
Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Mike Miller authored
Add the support for a large number of logical volumes. We will soon have hardware that support up to 1024 logical volumes. Signed-off-by:
-
Mike Miller authored
Remove the no longer used revalidate_allvol function. It was replaced by rebuild_lun_table. Signed-off-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Mike Miller authored
Change our open to test for drv->heads like we do in other places in the driver. Mostly for consistency. Signed-off-by:
-
Mike Miller authored
Change the blk_queue_max_sectors from 512 to 2048. This helps increase performance. [akpm@osdl.org: s/sector_size/max_sectors/] Signed-off-by:
-
Mike Miller authored
Unconditionally disable DMA prefetch on the P600 controller. An ASIC bug may result in prefetching beyond the end of physical memory. Signed-off-by:
-
Mike Miller authored
Change the SSID on the E500 as a workaround for a firmware bug. It looks like the original patch was backed out between rc2 and rc4. Signed-off-by:
-
Mike Miller authored
Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds. Most Smart Array controllers can support up to 1024 commands but the E200 family can only support 128. To prevent annoying "fifo full" messages we define nr_cmds on a per controller basis by adding it the product table. Signed-off-by:
-
Mike Miller authored
Add the support to fire up on any HP RAID class device that has a valid cciss signature. Signed-off-by:
-
Mike Miller authored
Change the cciss version number to 3.6.14 to reflect the following functionality changes added by the rest of the set. They include: - Support to fire up on any HP RAID class controller - Increase nr_cmds to 512 for most controllers by adding it to the product table - PCI subsystem ID fix fix was pulled - Disable DMA prefetch for the P600 on IPF platforms - Change from 512 to 2048 sector_size for performance - Fix in cciss_open for consistency - Remove the no longer used revalidate_allvol function - Bug fix for busy configuring - Support for more than 16 logical volumes - Cleanups in cciss_interrupt_mode - Fix for iostats, it's been broken for several kernel releases Signed-off-by:
-
Adrian Bunk authored
More fallout of the post 2.6.19-rc1 IRQ changes... CC init/main.o In file included from /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/rtc.h:102, from /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/efi.h:19, from /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/init/main.c:43: /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/interrupt.h:67: error: conflicting types for 'irq_handler_t' include2/asm/irq.h:49: error: previous declaration of 'irq_handler_t' was here Signed-off-by:Adrian Bunk <bunk@stusta.de> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Signed-off-by:
-
Jeff Dike authored
When the UML network driver generates random MACs for its devices, it was possible for a number of UMLs to get the same MACs because the ethernet initialization was done before the random pool was properly seeded. This patch moves the initialization later so that it gets better randomness. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Jeff Dike authored
We were using the wrong symbol to size register files. Signed-off-by:
-
Jeff Dike authored
Include the proper header to get a definition of PAGE_SHIFT. Signed-off-by:
-
Jeff Dike authored
We were not including stddef.h in files that used offsetof. One file was also including linux/stddef.h for no perciptible reason. Signed-off-by:
-
Yan Burman authored
Replace kmalloc+memset with kzalloc Signed-off-by:
Yan Burman <burman.yan@gmail.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Rafael J. Wysocki authored
Make the workqueues used by XFS freezeable, so their worker threads don't submit any I/O after the suspend image has been created. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@suspend2.net> Cc: David Chinner <dgc@sgi.com> Signed-off-by:
-
Rafael J. Wysocki authored
Make it possible to create a workqueue the worker thread of which will be frozen during suspend, along with other kernel threads. Signed-off-by:
-
Pavel Machek authored
Cleanup write-only variable, suggested by D Binderman. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Rafael J. Wysocki authored
The 'testproc' swsusp debug mode thaws tasks twice in a row, which is _very_ confusing. Fix that. Signed-off-by:
-
Pavel Machek authored
Linus posted quite nice TRACE_RESUME how-to, and I think it is too nice to be hidden in archives of mailing list, so I turned it into Documentation piece. Signed-off-by:
-
Rafael J. Wysocki authored
Move all labels in the swsusp code to the second column, so that they won't fool diff -p. Signed-off-by:
-
Rafael J. Wysocki authored
Fix coding style in suspend.c. Signed-off-by:
-
Rafael J. Wysocki authored
Move the loop from freeze_processes() to a separate function and call it independently for user space processes and kernel threads so that the order of freezing tasks is clearly visible. Signed-off-by:
-
Rafael J. Wysocki authored
Move the loop from thaw_processes() to a separate function and call it independently for kernel threads and user space processes so that the order of thawing tasks is clearly visible. Drop thaw_kernel_threads() which is never used. Signed-off-by:
-
Stephen Hemminger authored
The power management semaphore is only used as mutex, so convert it. [akpm@osdl.org: fix rotten bug] Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Acked-by:
-
Rafael J. Wysocki authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=7534 Fix the freezing of processes so that it won't fail if there is a traced process the parent of which has been stopped. Signed-off-by:
-
