- 13 Jul, 2017 1 commit
-
-
Kumar, Mahesh authored
This patch creates a new function for clamping u64 to fixed16. And make use of this function in other fixed16 wrappers. Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 11 Jul, 2017 1 commit
-
-
Rodrigo Vivi authored
Paulo had noticed that inside cnl_ddi_vswing_program the case was handling voltage but with no indication of type where a missing type could also take us to that path. So my first attempt was to add a message to let clear who trigger that path. However DK had a better idea that is to handle the missed type sooner before it might take to that path. So this v2 here uses his approach. v2: Handle missed type sooner. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170710205852.28352-1-rodrigo.vivi@intel.com
-
- 10 Jul, 2017 3 commits
-
-
Daniel Vetter authored
Resync with the main drm-next pull request for 4.13. What we really need is to fully resync with pending drm-misc, but that's not yet possible due to the still ongoing merge window. Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
Rodrigo Vivi authored
This is a follow-up after enabling DC states with commit: "drm/i915/DMC/CNL: Load DMC on CNL". Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499373908-26761-1-git-send-email-rodrigo.vivi@intel.com
-
Maarten Lankhorst authored
Commit 9a148a96 ("drm/i915/debugfs: add dp mst info") adds support for DP-MST to intel_connector_info, but forgot to remove the early return for DP-MST. Remove it, and print out MST connectors directly. Fixes: 9a148a96 ("drm/i915/debugfs: add dp mst info") Cc: <stable@vger.kernel.org> # v4.11+ Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Libin Yang <libin.yang@intel.com> Signed-off-by:
-
- 07 Jul, 2017 5 commits
-
-
Rodrigo Vivi authored
PLLs are the source clocks for the DDIs so in order to determine the ddi clock we need to check the PLL configuration. v2: Mika pointed out that 24 was hardcoded while it should consider ref clock that can be either 24KHz or 19.2KHz on CNL. Reviewed-by:Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Apparently no change on RPS stuff from previous platforms. v2: Merging to rps related patches in one and also adding missed cases. Cc: David Weinehall <david.weinehall@intel.com> Signed-off-by:David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499373673-25066-1-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
No change on render context size is required for Gen10. So this patch doesn't change the default behaviour, but only avoid the missing_case message. Cc: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Link: http://patchwork.freedesktop.org/patch/msgid/1499375184-5725-1-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Cannon Lake's VBT that is currently available for B0 stepping states that port D uses alternate pin 3 messing up with the default pin-port mapping table. Using that information we cannot get HDMI working properly. So for now we don't relly on VBT for this information. Cc: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Clinton Taylor <clinton.a.taylor@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499375295-6454-1-git-send-email-rodrigo.vivi@intel.com
-
Chuanxiao Dong authored
The ppgtt should be get directly from i915_address_space *vm instead of vma->vm. v2: - add one more fix for bxt. (Chris) Fixes: 4a234c5f ("drm/i915: pass the vma to insert_entries") Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=101713Signed-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> v1 Cc: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499421059-18262-1-git-send-email-chuanxiao.dong@intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 06 Jul, 2017 16 commits
-
-
Rodrigo Vivi authored
Cannonlake has same color setup as Geminilake. Legacy color load luts doesn't work anymore on Cannonlake+. Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
By spec there is no change on force wake registers for Cannonlake. Let's reuse gen9 one. v2: Adding missing case for the write part. (Tvrtko) v3: Rebase on recent tree. v4: Make it for gen9+ instead adding gen10 only. (by Joonas). Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499302831-17773-1-git-send-email-rodrigo.vivi@intel.com
-
Paulo Zanoni authored
So don't forget to reserve its stolen memory bits. v2: Add ack and remove "TODO" from commit message. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: http://patchwork.freedesktop.org/patch/msgid/1499302845-17856-1-git-send-email-rodrigo.vivi@intel.com
-
Imre Deak authored
The comments match an earlier version of the patch, fix them to match the current state. Signed-off-by:
-
Imre Deak authored
So far in an attempt to make sure all power wells get disabled during display uninitialization the driver removed any secondary request bits (BIOS, KVMR, DEBUG) that were set for a given power well. The known source for these requests was DMC's request on power well 1 and the misc IO power well. Since DMC is inactive (DC states are disabled) at the point we disable these power wells, there shouldn't be any reason to leave them on. However there are two problems with the above assumption: Bspec requires that the misc IO power well stays enabled (without providing a reason) and there can be KVMR requests that we can't remove anyway (the KVMR request register is R/O). Atm, a KVMR request can trigger a timeout WARN when trying to disable power wells. To make the code aligned to Bspec and to get rid of the KVMR WARN, don't try to remove the secondary requests, only detect them and stop polling for the power well disabled state when any one is set. Also add a comment about the timeout values required by Bspec when enabling power wells and the fact that waiting for them to get disabled is not required by Bspec. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98564Signed-off-by:
-
Imre Deak authored
What we want to assert based on the conditions required by Bspec is that power well 2 is disabled, so no need to check for other power wells. In addition we can only check if the driver's request is removed, the actual state depends on whether the other request bits are set or not (BIOS, KVMR, DEBUG). So check only the driver's request bit. Signed-off-by:
-
Imre Deak authored
Bspec requires leaving the misc IO power well enabled during display uninit, so align the code accordingly. Signed-off-by:
-
Imre Deak authored
Bspec requires a 10 us delay after disabling power well 1 and - if not toggled on-demand - the AUX IO power wells during display uninit. Signed-off-by:
-
Chris Wilson authored
Currently, we move all unreferenced contexts to an RCU free list and then onto a worker for eventual reaping. To compensate against this growing into a long list with frequent allocations starving the system of available memory, before we allocate a new context we reap all the stale contexts. This puts all the cost of destroying the context into the next allocator, which is presumably more sensitive to syscall latency and unfair. We can limit the number of contexts being freed by the new allocator to both keep the list trimmed and to allow the allocator to be reasonably fast. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Chris Wilson authored
Before we create a new context, we try and reap all the stale contexts (i.e. those that are freed but waiting for a worker to come and return their allocations to the system). Before we do this, we retire all requests so that we clear any inflight no longer used contexts (who are only being kept alived by those inflght requests). However, any context that is finally unreferenced by this retirement is put onto an RCU list and not available for immediately reaping, we stall for no immediate benefit. Signed-off-by:
-
Chris Wilson authored
We need to reap the stale contexts for all new contexts, be they created by user in i915_gem_context_ioctl or from opening a new file in i915_gem_context_open. Both paths may be called very frequently accumulating many stale contexts before any worker has a chance to run and free their memory. Fixes: 1acfc104 ("drm/i915: Enable rcu-only context lookups") Signed-off-by:
-
Chris Wilson authored
Avoid any pointer dereference in inspecting a potential PTR_ERR by checking for the error pointer before checking for an invalid context. Signed-off-by:
-
Xiong Zhang authored
In a IGD passthrough environment, the real ISA bridge may doesn't exist. then pch_id couldn't be correctly gotten from ISA bridge, but pch_id is used to identify LPT_H and LPT_LP. Currently i915 treat all LPT pch as LPT_H,then errors occur when i915 runs on LPT_LP machines with igd passthrough. This patch set pch_id for HSW/BDW according to IGD type and isn't fully correct. But it solves such issue on HSW/BDW ult/ulx machines. QA CI system is blocked by this issue for a long time, it's better that we could merge it to unblock QA CI system. We know the root cause is in device model of virtual passthrough, and will resolve it in the future with several parts cooperation in kernel, qemu and xen. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99938Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1497496305-5364-1-git-send-email-xiong.y.zhang@intel.com
-
Arvind Yadav authored
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 4028 1088 0 5116 13fc drivers/gpu/drm/i915/i915_sysfs.o File size After adding 'const': text data bss dec hex filename 4196 928 0 5124 1404 drivers/gpu/drm/i915/i915_sysfs.o Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Chris Wilson authored
the drm_file parameter is unused, so remove it. Signed-off-by:
Jason Ekstrand <jason@jlekstrand.net> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fixes for 4.13: - Various fixes for Raven - Various fixes for Vega10 - Stability fixes for KIQ - Fix reloading the driver - Fix S3 on vega10 - Misc other fixes * 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux: (26 commits) drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu. amdgpu: Set cik/si_support to 1 by default if radeon isn't built drm/amdgpu/gfx9: fix driver reload with KIQ drm/amdgpu/gfx8: fix driver reload with KIQ drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay drm/ttm: Fix use-after-free in ttm_bo_clean_mm drm/amd/amdgpu: move get memory type function from early init to sw init drm/amdgpu/cgs: always set reference clock in mode_info drm/amdgpu: fix vblank_time when displays are off drm/amd/powerplay: power value format change for Vega10 drm/amdgpu/gfx9: support the amdgpu.disable_cu option drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10 drm/amdgpu: Make amdgpu_cs_parser_init static (v2) drm/amdgpu/cs: fix a typo in a comment drm/amdgpu: Fix the exported always on CU bitmap drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup drm/amd/powerplay/cz: print message if smc message fails drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init drm/amdgpu: enable mmhub pg on raven ...
-
- 05 Jul, 2017 1 commit
-
-
Rex Zhu authored
when hw_fini, pp will disable dpm.so remove sysfs before disable dpm. Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Tested-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
- 04 Jul, 2017 8 commits
-
-
Michel Dänzer authored
It was required to explicitly set these parameters to 1, even if the radeon driver isn't built at all, which is not intuitive. Reported-by:
Shawn Starr <shawn.starr@rogers.com> Signed-off-by:
-
Alex Deucher authored
Drop the KCQ disabling via KIQ. We disable the MEC shortly after anyway, so there is no need to wait for all of this. Doing so seems to leave the MEC in a bad way. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
Drop the deactivation in KIQ init and drop the KCQ disabling via KIQ. We disable the MEC shortly after anyway, so there is no need to wait for all of this. Doing so seems to leave the MEC in a bad way. Tested-by:
-
Manasi Navare authored
This patch fixes the DP AUX CH timeouts observed during CI IGT tests thus fixing the CI failures. This is done by adding a quirk for a particular PCI device that requires the panel power cycle delay (T12) to be set to 800ms which is 300msecs more than the minimum value specified in the eDP spec. So a quirk is implemented for that specific PCI device. v4: * Add Bugzilla links for FDO bugs in the commit message (Ville, Jani) v3: * Change some comments, specify the delay as 800 * 10 (Ville) v2: * Change the function and variable names to from PPS_T12_ to _T12 since it is a T12 delay (Clint) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101154 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101167 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101515 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Mahesh Kumar authored
GEN9+ Interlace fetch mode doesn't support pipe/plane scaling, This patch adds check to fail the flip if pipe/plane scaling is requested in Interlace fetch mode. Changes since V1: - move check to skl_update_scaler (ville) - mode to adjusted_mode (ville) - combine pipe/plane scaling check Changes since V2: - Indentation fix - Added TODO to handle/reject NV12 with interlace mode Signed-off-by:
-
Mahesh Kumar authored
In Gen9 platform Interlaced fetch mode doesn't support following plane configuration: - Y/Yf tiling - 90/270 rotation - YUV420 hybrid planar source pixel formats. This patch adds check to fail the flip if any of the above configuration is requested. Changes since V1: - handle checks in intel_plane_atomic_check_with_state (ville) - takeout plane scaler checks combile with pipe scaler in next patch Changes since V2: - No need to check for NV12 as it need scaling, so it will be rejected by scaling check (ville) Signed-off-by:
-
Chris Wilson authored
Commit fabef825 ("drm/i915: Drop struct_mutex around frontbuffer flushes") adds a dependency to ifbdev->vma when flushing the framebufer, but the checks are only against the existence of the ifbdev->fb and not against ifbdev->vma. This leaves a window of opportunity where we may try to operate on the fbdev prior to it being probed (thanks to asynchronous booting). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101534 Fixes: fabef825 ("drm/i915: Drop struct_mutex around frontbuffer flushes") Signed-off-by:
-
Chris Wilson authored
When iterating the list of contexts to free, we need to use a safe iterator as we are freeing the link as we go. Pass an extra thick brown paper bag. Fixes: 5f09a9c8 ("drm/i915: Allow contexts to be unreferenced locklessly") Signed-off-by:
Matthew Auld <matthew.auld@intel.com>
-
- 03 Jul, 2017 5 commits
-
-
John Brooks authored
amd_powerplay_destroy() expects a handle pointing to a struct pp_instance. On chips without PowerPlay, pp_handle points to a struct amdgpu_device. The resulting attempt to kfree() fields of the wrong struct ends in fire: [ 91.560405] BUG: unable to handle kernel paging request at ffffebe000000620 [ 91.560414] IP: kfree+0x57/0x160 [ 91.560416] PGD 0 [ 91.560416] P4D 0 [ 91.560420] Oops: 0000 [#1] SMP [ 91.560422] Modules linked in: tun x86_pkg_temp_thermal crc32_pclmul ghash_clmulni_intel efivarfs amdgpu(-) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm [ 91.560438] CPU: 6 PID: 3598 Comm: rmmod Not tainted 4.12.0-rc5-drm-next-4.13-ttmpatch+ #1 [ 91.560443] Hardware name: Gigabyte Technology Co., Ltd. Z97X-UD3H-BK/Z97X-UD3H-BK-CF, BIOS F6 06/17/2014 [ 91.560448] task: ffff8805063d6a00 task.stack: ffffc90003400000 [ 91.560451] RIP: 0010:kfree+0x57/0x160 [ 91.560454] RSP: 0018:ffffc90003403cc0 EFLAGS: 00010286 [ 91.560457] RAX: 000077ff80000000 RBX: 00000000000186a0 RCX: 0000000180400035 [ 91.560460] RDX: 0000000180400036 RSI: ffffea001418e740 RDI: ffffea0000000000 [ 91.560463] RBP: ffffc90003403cd8 R08: 000000000639d201 R09: 0000000180400035 [ 91.560467] R10: ffffebe000000600 R11: 0000000000000300 R12: ffff880500530030 [ 91.560470] R13: ffffffffa01e70fc R14: 00000000ffffffff R15: ffff880500530000 [ 91.560473] FS: 00007f7e500c3700(0000) GS:ffff88051ed80000(0000) knlGS:0000000000000000 [ 91.560478] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 91.560480] CR2: ffffebe000000620 CR3: 0000000503103000 CR4: 00000000001406e0 [ 91.560483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 91.560487] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 91.560489] Call Trace: [ 91.560530] amd_powerplay_destroy+0x1c/0x60 [amdgpu] [ 91.560558] amdgpu_pp_late_fini+0x44/0x60 [amdgpu] [ 91.560575] amdgpu_fini+0x254/0x490 [amdgpu] [ 91.560593] amdgpu_device_fini+0x58/0x1b0 [amdgpu] [ 91.560610] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [ 91.560622] drm_dev_unregister+0x3c/0xe0 [drm] [ 91.560638] amdgpu_pci_remove+0x19/0x30 [amdgpu] [ 91.560643] pci_device_remove+0x39/0xc0 [ 91.560648] device_release_driver_internal+0x155/0x210 [ 91.560651] driver_detach+0x38/0x70 [ 91.560655] bus_remove_driver+0x4c/0xa0 [ 91.560658] driver_unregister+0x2c/0x40 [ 91.560662] pci_unregister_driver+0x21/0x90 [ 91.560689] amdgpu_exit+0x15/0x406 [amdgpu] [ 91.560694] SyS_delete_module+0x1a8/0x270 [ 91.560698] ? exit_to_usermode_loop+0x92/0xa0 [ 91.560702] entry_SYSCALL_64_fastpath+0x13/0x94 [ 91.560705] RIP: 0033:0x7f7e4fc118e7 [ 91.560708] RSP: 002b:00007fff978ca118 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 91.560713] RAX: ffffffffffffffda RBX: 000055afe21bc200 RCX: 00007f7e4fc118e7 [ 91.560716] RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055afe21bc268 [ 91.560719] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999 [ 91.560722] R10: 0000000000000883 R11: 0000000000000206 R12: 00007fff978c9100 [ 91.560725] R13: 0000000000000000 R14: 0000000000000000 R15: 000055afe21bc200 [ 91.560728] Code: 00 00 00 80 ff 77 00 00 48 bf 00 00 00 00 00 ea ff ff 49 01 da 48 0f 42 05 57 33 bd 00 49 01 c2 49 c1 ea 0c 49 c1 e2 06 49 01 fa <49> 8b 42 20 48 8d 78 ff a8 01 4c 0f 45 d7 49 8b 52 20 48 8d 42 [ 91.560759] RIP: kfree+0x57/0x160 RSP: ffffc90003403cc0 [ 91.560761] CR2: ffffebe000000620 [ 91.560765] ---[ end trace 08a9f3cd82223c1d ]--- Fixes: 1c863802 (drm/amd/powerplay: refine powerplay interface.) Signed-off-by:
John Brooks <john@fastquake.com> Acked-by:
-
John Brooks authored
We unref the man->move fence in ttm_bo_clean_mm() and then call ttm_bo_force_list_clean() which waits on it, except the refcount is now zero so a warning is generated (or worse): [149492.279301] refcount_t: increment on 0; use-after-free. [149492.279309] ------------[ cut here ]------------ [149492.279315] WARNING: CPU: 3 PID: 18726 at lib/refcount.c:150 refcount_inc+0x2b/0x30 [149492.279315] Modules linked in: vhost_net vhost tun x86_pkg_temp_thermal crc32_pclmul ghash_clmulni_intel efivarfs amdgpu( -) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm [149492.279326] CPU: 3 PID: 18726 Comm: rmmod Not tainted 4.12.0-rc5-drm-next-4.13-ttmpatch+ #1 [149492.279326] Hardware name: Gigabyte Technology Co., Ltd. Z97X-UD3H-BK/Z97X-UD3H-BK-CF, BIOS F6 06/17/2014 [149492.279327] task: ffff8804ddfedcc0 task.stack: ffffc90008d20000 [149492.279329] RIP: 0010:refcount_inc+0x2b/0x30 [149492.279330] RSP: 0018:ffffc90008d23c30 EFLAGS: 00010286 [149492.279331] RAX: 000000000000002b RBX: 0000000000000170 RCX: 0000000000000000 [149492.279331] RDX: 0000000000000000 RSI: ffff88051ecccbe8 RDI: ffff88051ecccbe8 [149492.279332] RBP: ffffc90008d23c30 R08: 0000000000000001 R09: 00000000000003ee [149492.279333] R10: ffffc90008d23bb0 R11: 00000000000003ee R12: ffff88043aaac960 [149492.279333] R13: ffff8805005e28a8 R14: 0000000000000002 R15: ffff88050115e178 [149492.279334] FS: 00007fc540168700(0000) GS:ffff88051ecc0000(0000) knlGS:0000000000000000 [149492.279335] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [149492.279336] CR2: 00007fc3e8654140 CR3: 000000027ba77000 CR4: 00000000001426e0 [149492.279337] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [149492.279337] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [149492.279338] Call Trace: [149492.279345] ttm_bo_force_list_clean+0xb9/0x110 [ttm] [149492.279348] ttm_bo_clean_mm+0x7a/0xe0 [ttm] [149492.279375] amdgpu_ttm_fini+0xc9/0x1f0 [amdgpu] [149492.279392] amdgpu_bo_fini+0x12/0x40 [amdgpu] [149492.279415] gmc_v7_0_sw_fini+0x32/0x40 [amdgpu] [149492.279430] amdgpu_fini+0x2c9/0x490 [amdgpu] [149492.279445] amdgpu_device_fini+0x58/0x1b0 [amdgpu] [149492.279461] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [149492.279470] drm_dev_unregister+0x3c/0xe0 [drm] [149492.279485] amdgpu_pci_remove+0x19/0x30 [amdgpu] [149492.279487] pci_device_remove+0x39/0xc0 [149492.279490] device_release_driver_internal+0x155/0x210 [149492.279491] driver_detach+0x38/0x70 [149492.279493] bus_remove_driver+0x4c/0xa0 [149492.279494] driver_unregister+0x2c/0x40 [149492.279496] pci_unregister_driver+0x21/0x90 [149492.279520] amdgpu_exit+0x15/0x406 [amdgpu] [149492.279523] SyS_delete_module+0x1a8/0x270 [149492.279525] ? exit_to_usermode_loop+0x92/0xa0 [149492.279528] entry_SYSCALL_64_fastpath+0x13/0x94 [149492.279529] RIP: 0033:0x7fc53fcb68e7 [149492.279529] RSP: 002b:00007ffcfbfaabb8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [149492.279531] RAX: ffffffffffffffda RBX: 0000563117adb200 RCX: 00007fc53fcb68e7 [149492.279531] RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000563117adb268 [149492.279532] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999 [149492.279533] R10: 0000000000000883 R11: 0000000000000206 R12: 00007ffcfbfa9ba0 [149492.279533] R13: 0000000000000000 R14: 0000000000000000 R15: 0000563117adb200 [149492.279534] Code: 55 48 89 e5 e8 77 fe ff ff 84 c0 74 02 5d c3 80 3d 40 f2 a4 00 00 75 f5 48 c7 c7 20 3c ca 81 c6 05 30 f2 a4 00 01 e8 91 f0 d7 ff <0f> ff 5d c3 90 55 48 89 fe bf 01 00 00 00 48 89 e5 e8 9f fe ff [149492.279557] ---[ end trace 2d4e0ffcb66a1016 ]--- Unref the fence *after* waiting for it. v2: Set man->move to NULL after dropping the last ref (Christian König) Fixes: aff98ba1 (drm/ttm: wait for eviction in ttm_bo_force_list_clean) Signed-off-by:
-
Maarten Lankhorst authored
When reading all debugfs files on a system with DP-MST the kernel panics on a null pointer dereference because intel_dp is null for a DP-MST connector. Detect this case and skip those connectors. Also fix the write for the DP compliance file in the same way. Changes since v1: - Fix i915_displayport_test_active_write too. (DK) Signed-off-by:
-
sagar.a.kamble@intel.com authored
OA buffer initialization involves access to HW registers to set the OA base, head and tail. Ensure device is awake while setting these. With this, all oa.ops are covered under RPM and forcewake wakelock. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:
-
