- 11 Sep, 2013 40 commits
-
-
David Daney authored
The SMP version of this function doesn't unconditionally enable irqs, so neither should this !SMP version. There are no know problems caused by this, but we make the change for consistency's sake. Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Daney authored
As in commit f21afc25 ("smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu()"), we don't want to enable irqs if they are not already enabled. There are currently no known problematical callers of these functions, but since it is a known failure pattern, we preemptively fix them. Since they are not trivial functions, make them non-inline by moving them to up.c. This also makes it so we don't have to fix #include dependancies for preempt_{disable,enable}. Signed-off-by:
-
Will Deacon authored
When running with GENERIC_LOCKBREAK=y, the locking implementations emit calls to arch_{read,write,spin}_relax when spinning on a contended lock in order to allow architectures to favour the CPU owning the lock if possible. In reality, everybody apart from PowerPC and S390 just does cpu_relax() here, so make that the default behaviour and allow it to be overridden if required. Signed-off-by:Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Chen Gang authored
When failure occurs in hotplug_cfd(), need release related resources, or will cause memory leak. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Acked-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Gu Zheng authored
Free the bio_integrity_pool in the fail path of biovec_create_pool in function bioset_integrity_create(). Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
-
Andi Kleen authored
We cannot assume that the inline assembler code always ends up in the same file as the original C file. So make any assembler labels that are called with "extern" by C global Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Andi Kleen authored
const has to use __initconst, not __initdata Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Mathieu Desnoyers authored
I found the following pattern that leads in to interesting findings: grep -r "ret.*|=.*__put_user" * grep -r "ret.*|=.*__get_user" * grep -r "ret.*|=.*__copy" * The __put_user() calls in compat_ioctl.c, ptrace compat, signal compat, since those appear in compat code, we could probably expect the kernel addresses not to be reachable in the lower 32-bit range, so I think they might not be exploitable. For the "__get_user" cases, I don't think those are exploitable: the worse that can happen is that the kernel will copy kernel memory into in-kernel buffers, and will fail immediately afterward. The alpha csum_partial_copy_from_user() seems to be missing the access_ok() check entirely. The fix is inspired from x86. This could lead to information leak on alpha. I also noticed that many architectures map csum_partial_copy_from_user() to csum_partial_copy_generic(), but I wonder if the latter is performing the access checks on every architectures. Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Jingoo Han authored
The use of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Tom Gundersen <teg@jklm.no> Cc: Mike Waychison <mikew@google.com> Acked-by:
Mike Waychison <mikew@google.com> Signed-off-by:
-
Shuah Khan authored
Convert drivers/platform/x86/apple-gmux to use dev_pm_ops instead of legacy pm_ops. This patch depends on pnp driver bus ops change to invoke pnp_driver dev_pm_ops. Signed-off-by:
Shuah Khan <shuah.kh@samsung.com> Cc: Matthew Garrett <matthew.garrett@nebula.com> Cc: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com> Cc: Ashley Lai <ashley@ashleylai.com> Cc: Rajiv Andrade <mail@srajiv.net> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Sirrix AG <tpmdd@sirrix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Peter Hüwe <PeterHuewe@gmx.de> Signed-off-by:
-
Shuah Khan authored
Convert drivers/char/tpm/tpm_tis.c to use dev_pm_ops instead of legacy pm_ops. This patch depends on pnp driver bus ops change to invoke pnp_driver dev_pm_ops. Signed-off-by:
-
Shuah Khan authored
Convert drivers/rtc/rtc-cmos to use dev_pm_ops instead of legacy pm_ops. This patch depends on pnp driver bus ops change to invoke pnp_driver dev_pm_ops. Signed-off-by:
-
Shuah Khan authored
pnp_bus_suspend() and pnp_bus_resume() invoke legacy pm_ops from pnp_driver. Changed pnp_bus_suspend() and pnp_bus_resume() to check if pnp driver has dev_pm_ops and call. If dev_pm_ops don't exist, then call use legacy pm_ops. Without this change, pnp_driver dev_pm_ops will not get called. In addition to the pnp driver bus pm_ops change to invoke driver dev_pm_ops, this patch set contains changes to rtc-cmos, tpm_tis, and apple-gmux pnp drivers to convert from legacy pm_ops to dev_pm_ops. This patch (of 4): pnp_bus_suspend() and pnp_bus_resume() invoke legacy pm_ops from pnp_driver. Changed pnp_bus_suspend() and pnp_bus_resume() to check if pnp driver has dev_pm_ops and call. If dev_pm_ops don't exist, then call use legacy pm_ops. Without this change, pnp_driver dev_pm_ops will not get called. Signed-off-by:
-
Greg Thelen authored
A memory cgroup with (1) multiple threshold notifications and (2) at least one threshold >=2G was not reliable. Specifically the notifications would either not fire or would not fire in the proper order. The __mem_cgroup_threshold() signaling logic depends on keeping 64 bit thresholds in sorted order. mem_cgroup_usage_register_event() sorts them with compare_thresholds(), which returns the difference of two 64 bit thresholds as an int. If the difference is positive but has bit[31] set, then sort() treats the difference as negative and breaks sort order. This fix compares the two arbitrary 64 bit thresholds returning the classic -1, 0, 1 result. The test below sets two notifications (at 0x1000 and 0x81001000): cd /sys/fs/cgroup/memory mkdir x for x in 4096 2164264960; do cgroup_event_listener x/memory.usage_in_bytes $x | sed "s/^/$x listener:/" & done echo $$ > x/cgroup.procs anon_leaker 500M v3.11-rc7 fails to signal the 4096 event listener: Leaking... Done leaking pages. Patched v3.11-rc7 properly notifies: Leaking... 4096 listener:2013:8:31:14:13:36 Done leaking pages. The fixed bug is old. It appears to date back to the introduction of memcg threshold notifications in v2.6.34-rc1-116-g2e72b634 "memcg: implement memory thresholds" Signed-off-by:Greg Thelen <gthelen@google.com> Acked-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Joe Perches authored
Use the helper function instead of __GFP_ZERO. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Use the helper function instead of __GFP_ZERO. Signed-off-by:
-
Yanchuan Nian authored
pgoff is not used after the statement "pgoff = vma->vm_pgoff;", so the assignment is redundant. Signed-off-by:
Yanchuan Nian <ycnian@gmail.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Junxiao Bi authored
There is a race between mark inode dirty and writeback thread, see the following scenario. In this case, writeback thread will not run though there is dirty_io. __mark_inode_dirty() bdi_writeback_workfn() ... ... spin_lock(&inode->i_lock); ... if (bdi_cap_writeback_dirty(bdi)) { <<< assume wb has dirty_io, so wakeup_bdi is false. <<< the following inode_dirty also have wakeup_bdi false. if (!wb_has_dirty_io(&bdi->wb)) wakeup_bdi = true; } spin_unlock(&inode->i_lock); <<< assume last dirty_io is removed here. pages_written = wb_do_writeback(wb); ... <<< work_list empty and wb has no dirty_io, <<< delayed_work will not be queued. if (!list_empty(&bdi->work_list) || (wb_has_dirty_io(wb) && dirty_writeback_interval)) queue_delayed_work(bdi_wq, &wb->dwork, msecs_to_jiffies(dirty_writeback_interval * 10)); spin_lock(&bdi->wb.list_lock); inode->dirtied_when = jiffies; <<< new dirty_io is added. list_move(&inode->i_wb_list, &bdi->wb.b_dirty); spin_unlock(&bdi->wb.list_lock); <<< though there is dirty_io, but wakeup_bdi is false, <<< so writeback thread will not be waked up and <<< the new dirty_io will not be flushed. if (wakeup_bdi) bdi_wakeup_thread_delayed(bdi); Writeback will run until there is a new flush work queued. This may cause a lot of dirty pages stay in memory for a long time. Signed-off-by:Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Andrew Morton authored
madvise_hwpoison() has two locals called "ret". Fix it all up. Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Wanpeng Li authored
The return value outside for loop is always zero which means madvise_hwpoison return success, however, this is not truth for soft_offline_page w/ failure return value. Signed-off-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Wanpeng Li authored
Injecting memory failure for page 0x19d0 at 0xb77d2000 MCE 0x19d0: non LRU page recovery: Ignored MCE: Software-unpoisoned page 0x19d0 BUG: Bad page state in process bash pfn:019d0 page:f3461a00 count:0 mapcount:0 mapping: (null) index:0x0 page flags: 0x40000404(referenced|reserved) Modules linked in: nfsd auth_rpcgss i915 nfs_acl nfs lockd video drm_kms_helper drm bnep rfcomm sunrpc bluetooth psmouse parport_pc ppdev lp serio_raw fscache parport gpio_ich lpc_ich mac_hid i2c_algo_bit tpm_tis wmi usb_storage hid_generic usbhid hid e1000e firewire_ohci firewire_core ahci ptp libahci pps_core crc_itu_t CPU: 3 PID: 2123 Comm: bash Not tainted 3.11.0-rc6+ #12 Hardware name: LENOVO 7034DD7/ , BIOS 9HKT47AUS 01//2012 00000000 00000000 e9625ea0 c15ec49b f3461a00 e9625eb8 c15ea119 c17cbf18 ef084314 000019d0 f3461a00 e9625ed8 c110dc8a f3461a00 00000001 00000000 f3461a00 40000404 00000000 e9625ef8 c110dcc1 f3461a00 f3461a00 000019d0 Call Trace: dump_stack+0x41/0x52 bad_page+0xcf/0xeb free_pages_prepare+0x12a/0x140 free_hot_cold_page+0x21/0x110 __put_single_page+0x21/0x30 put_page+0x25/0x40 unpoison_memory+0x107/0x200 hwpoison_unpoison+0x20/0x30 simple_attr_write+0xb6/0xd0 vfs_write+0xa0/0x1b0 SyS_write+0x4f/0x90 sysenter_do_call+0x12/0x22 Disabling lock debugging due to kernel taint Testcase: #define _GNU_SOURCE #include <stdlib.h> #include <stdio.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <errno.h> #define PAGES_TO_TEST 1 #define PAGE_SIZE 4096 int main(void) { char *mem; mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (madvise(mem, PAGES_TO_TEST * PAGE_SIZE, MADV_HWPOISON) == -1) return -1; munmap(mem, PAGES_TO_TEST * PAGE_SIZE); return 0; } There is one page reference count for default empty zero page, madvise_hwpoison add another one by get_user_pages_fast. memory_hwpoison reduce one page reference count since it's a non LRU page. unpoison_memory release the last page reference count and free empty zero page to buddy system which is not correct since empty zero page has PG_reserved flag. This patch fix it by don't reduce the page reference count under 1 against empty zero page. Signed-off-by: -
Wanpeng Li authored
Hwpoison injection doesn't implement read method for corrupt-pfn/unpoison-pfn attributes: # cat /sys/kernel/debug/hwpoison/corrupt-pfn cat: /sys/kernel/debug/hwpoison/corrupt-pfn: Permission denied # cat /sys/kernel/debug/hwpoison/unpoison-pfn cat: /sys/kernel/debug/hwpoison/unpoison-pfn: Permission denied This patch changes the permission of corrupt-pfn/unpoison-pfn to 0200. Signed-off-by:
-
Wanpeng Li authored
madvise hwpoison inject will poison the read-only empty zero page if there is no write access before poison. Empty zero page reference count will be increased for hwpoison, subsequent poison zero page will return directly since page has already been set PG_hwpoison, however, page reference count is still increased by get_user_pages_fast. The unpoison process will unpoison the empty zero page and decrease the reference count successfully for the fist time, however, subsequent unpoison empty zero page will return directly since page has already been unpoisoned and without decrease the page reference count of empty zero page. This patch fixes it by make madvise_hwpoison() put a page and return immediately (without calling memory_failure() or soft_offline_page()) when the page is already hwpoisoned. Testcase: #define _GNU_SOURCE #include <stdlib.h> #include <stdio.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <errno.h> #define PAGES_TO_TEST 3 #define PAGE_SIZE 4096 int main(void) { char *mem; int i; mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); if (madvise(mem, PAGES_TO_TEST * PAGE_SIZE, MADV_HWPOISON) == -1) return -1; munmap(mem, PAGES_TO_TEST * PAGE_SIZE); return 0; } Add printk to dump page reference count: [ 93.075959] Injecting memory failure for page 0x19d0 at 0xb77d8000 [ 93.076207] MCE 0x19d0: non LRU page recovery: Ignored [ 93.076209] pfn 0x19d0, page count = 1 after memory failure [ 93.076220] Injecting memory failure for page 0x19d0 at 0xb77d9000 [ 93.076221] MCE 0x19d0: already hardware poisoned [ 93.076222] pfn 0x19d0, page count = 2 after memory failure [ 93.076224] Injecting memory failure for page 0x19d0 at 0xb77da000 [ 93.076224] MCE 0x19d0: already hardware poisoned [ 93.076225] pfn 0x19d0, page count = 3 after memory failure Signed-off-by: -
Wanpeng Li authored
Add '#' to madvise_hwpoison. Before patch: [ 95.892866] Injecting memory failure for page 19d0 at b7786000 [ 95.893151] MCE 0x19d0: non LRU page recovery: Ignored After patch: [ 95.892866] Injecting memory failure for page 0x19d0 at 0xb7786000 [ 95.893151] MCE 0x19d0: non LRU page recovery: Ignored Signed-off-by:
-
Wanpeng Li authored
Drop forward reference declarations __soft_offline_page. Signed-off-by:
-
Wanpeng Li authored
Set pageblock migration type will hold zone->lock which is heavy contended in system to avoid race. However, soft offline page will set pageblock migration type twice during get page if the page is in used, not hugetlbfs page and not on lru list. There is unnecessary to set the pageblock migration type and hold heavy contended zone->lock again if the first round get page have already set the pageblock to right migration type. The trick here is migration type is MIGRATE_ISOLATE. There are other two parts can change MIGRATE_ISOLATE except hwpoison. One is memory hoplug, however, we hold lock_memory_hotplug() which avoid race. The second is CMA which umovable page allocation requst can't fallback to. So it's safe here. Signed-off-by:
-
Wanpeng Li authored
Replace atomic_long_sub() with atomic_long_dec() since the page is normal page instead of hugetlbfs page or thp. Signed-off-by:
-
Wanpeng Li authored
There is a race between hwpoison page and unpoison page, memory_failure set the page hwpoison and increase num_poisoned_pages without hold page lock, and one page count will be accounted against thp for num_poisoned_pages. However, unpoison can occur before memory_failure hold page lock and split transparent hugepage, unpoison will decrease num_poisoned_pages by 1 << compound_order since memory_failure has not yet split transparent hugepage with page lock held. That means we account one page for hwpoison and 1 << compound_order for unpoison. This patch fix it by inserting a PageTransHuge check before doing TestClearPageHWPoison, unpoison failed without clearing PageHWPoison and decreasing num_poisoned_pages. A B memory_failue TestSetPageHWPoison(p); if (PageHuge(p)) nr_pages = 1 << compound_order(hpage); else nr_pages = 1; atomic_long_add(nr_pages, &num_poisoned_pages); unpoison_memory nr_pages = 1<< compound_trans_order(page); if(TestClearPageHWPoison(p)) atomic_long_sub(nr_pages, &num_poisoned_pages); lock page if (!PageHWPoison(p)) unlock page and return hwpoison_user_mappings if (PageTransHuge(hpage)) split_huge_page(hpage); Signed-off-by: -
Wanpeng Li authored
compound lock is introduced by commit e9da73d6("thp: compound_lock."), it is used to serialize put_page against __split_huge_page_refcount(). In addition, transparent hugepages will be splitted in hwpoison handler and just one subpage will be poisoned. There is unnecessary to hold compound lock for hugetlbfs page. This patch replace compound_trans_order by compond_order in the place where the page is hugetlbfs page. Signed-off-by:
-
Wanpeng Li authored
memory_failure() store the page flag of the error page before doing unmap, and (only) if the first check with page flags at the time decided the error page is unknown, it do the second check with the stored page flag since memory_failure() does unmapping of the error pages before doing page_action(). This unmapping changes the page state, especially page_remove_rmap() (called from try_to_unmap_one()) clears PG_mlocked, so page_action() can't catch mlocked pages after that. However, memory_failure() can't handle memory errors on dirty mlocked pages correctly. try_to_unmap_one will move the dirty bit from pte to the physical page, the second check lose it since it check the stored page flag. This patch fix it by restore PG_dirty flag to stored page flag if the page is dirty. Testcase: #define _GNU_SOURCE #include <stdlib.h> #include <stdio.h> #include <sys/mman.h> #include <sys/types.h> #include <errno.h> #define PAGES_TO_TEST 2 #define PAGE_SIZE 4096 int main(void) { char *mem; int i; mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_LOCKED, 0, 0); for (i = 0; i < PAGES_TO_TEST; i++) mem[i * PAGE_SIZE] = 'a'; if (madvise(mem, PAGES_TO_TEST * PAGE_SIZE, MADV_HWPOISON) == -1) return -1; return 0; } Before patch: [ 912.839247] Injecting memory failure for page 7dfb8 at 7f6b4e37b000 [ 912.839257] MCE 0x7dfb8: clean mlocked LRU page recovery: Recovered [ 912.845550] MCE 0x7dfb8: clean mlocked LRU page still referenced by 1 users [ 912.852586] Injecting memory failure for page 7e6aa at 7f6b4e37c000 [ 912.852594] MCE 0x7e6aa: clean mlocked LRU page recovery: Recovered [ 912.858936] MCE 0x7e6aa: clean mlocked LRU page still referenced by 1 users After patch: [ 163.590225] Injecting memory failure for page 91bc2f at 7f9f5b0e5000 [ 163.590264] MCE 0x91bc2f: dirty mlocked LRU page recovery: Recovered [ 163.596680] MCE 0x91bc2f: dirty mlocked LRU page still referenced by 1 users [ 163.603831] Injecting memory failure for page 91cdd3 at 7f9f5b0e6000 [ 163.603852] MCE 0x91cdd3: dirty mlocked LRU page recovery: Recovered [ 163.610305] MCE 0x91cdd3: dirty mlocked LRU page still referenced by 1 users Signed-off-by: -
Naoya Horiguchi authored
Soft offline code expects that MIGRATE_ISOLATE is set on the target page only during soft offlining work. But currenly it doesn't work as expected when get_any_page() fails and returns negative value. In the result, end users can have unexpectedly isolated pages. This patch just fixes it. Signed-off-by:
-
Wang Sheng-Hui authored
Set _mapcount PAGE_BUDDY_MAPCOUNT_VALUE to make the page buddy. Not the magic number -2. Signed-off-by:
Wang Sheng-Hui <shhuiw@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Cyrill Gorcunov authored
_PAGE_SOFT_DIRTY bit should never be set on present pte so add VM_BUG_ON to catch any potential future abuse. Also add a comment on _PAGE_SWP_SOFT_DIRTY definition explaining scope of its usage. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Acked-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Maxim Patlasov authored
The feature prevents mistrusted filesystems (ie: FUSE mounts created by unprivileged users) to grow a large number of dirty pages before throttling. For such filesystems balance_dirty_pages always check bdi counters against bdi limits. I.e. even if global "nr_dirty" is under "freerun", it's not allowed to skip bdi checks. The only use case for now is fuse: it sets bdi max_ratio to 1% by default and system administrators are supposed to expect that this limit won't be exceeded. The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag. A filesystem may set the flag when it initializes its BDI. The problematic scenario comes from the fact that nobody pays attention to the NR_WRITEBACK_TEMP counter (i.e. number of pages under fuse writeback). The implementation of fuse writeback releases original page (by calling end_page_writeback) almost immediately. A fuse request queued for real processing bears a copy of original page. Hence, if userspace fuse daemon doesn't finalize write requests in timely manner, an aggressive mmap writer can pollute virtually all memory by those temporary fuse page copies. They are carefully accounted in NR_WRITEBACK_TEMP, but nobody cares. To make further explanations shorter, let me use "NR_WRITEBACK_TEMP problem" as a shortcut for "a possibility of uncontrolled grow of amount of RAM consumed by temporary pages allocated by kernel fuse to process writeback". The problem was very easy to reproduce. There is a trivial example filesystem implementation in fuse userspace distribution: fusexmp_fh.c. I added "sleep(1);" to the write methods, then recompiled and mounted it. Then created a huge file on the mount point and run a simple program which mmap-ed the file to a memory region, then wrote a data to the region. An hour later I observed almost all RAM consumed by fuse writeback. Since then some unrelated changes in kernel fuse made it more difficult to reproduce, but it is still possible now. Putting this theoretical happens-in-the-lab thing aside, there is another thing that really hurts real world (FUSE) users. This is write-through page cache policy FUSE currently uses. I.e. handling write(2), kernel fuse populates page cache and flushes user data to the server synchronously. This is excessively suboptimal. Pavel Emelyanov's patches ("writeback cache policy") solve the problem, but they also make resolving NR_WRITEBACK_TEMP problem absolutely necessary. Otherwise, simply copying a huge file to a fuse mount would result in memory starvation. Miklos, the maintainer of FUSE, believes strictlimit feature the way to go. And eventually putting FUSE topics aside, there is one more use-case for strictlimit feature. Using a slow USB stick (mass storage) in a machine with huge amount of RAM installed is a well-known pain. Let's make simple computations. Assuming 64GB of RAM installed, existing implementation of balance_dirty_pages will start throttling only after 9.6GB of RAM becomes dirty (freerun == 15% of total RAM). So, the command "cp 9GB_file /media/my-usb-storage/" may return in a few seconds, but subsequent "umount /media/my-usb-storage/" will take more than two hours if effective throughput of the storage is, to say, 1MB/sec. After inclusion of strictlimit feature, it will be trivial to add a knob (e.g. /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand. Manually or via udev rule. May be I'm wrong, but it seems to be quite a natural desire to limit the amount of dirty memory for some devices we are not fully trust (in the sense of sustainable throughput). [akpm@linux-foundation.org: fix warning in page-writeback.c] Signed-off-by:Maxim Patlasov <MPatlasov@parallels.com> Cc: Jan Kara <jack@suse.cz> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Chen Gang authored
'*lenp' may be less than "sizeof(kbuf)" so we must check this before the next copy_to_user(). pdflush_proc_obsolete() is called by sysctl which 'procname' is "nr_pdflush_threads", if the user passes buffer length less than "sizeof(kbuf)", it will cause issue. Signed-off-by:
-
Chen Gang authored
In alloc_new_pmd(), if pud_alloc() was called successfully, but pmd_alloc() fails, avoid leaking `pud'. Signed-off-by:
-
Wanpeng Li authored
Use wrapper function get_vm_area_size to calculate size of vm area. Signed-off-by:
-
Wanpeng Li authored
It's not used globally and could be static. Signed-off-by:
-
Wanpeng Li authored
After commit 9bdac914 ("sparsemem: Put mem map for one node together."), vmemmap for one node will be allocated together, its logic is similar as memory allocation for pageblock flags. This patch introduces alloc_usemap_and_memmap to extract the same logic of memory alloction for pageblock flags and vmemmap. Signed-off-by:
-
Lisa Du authored
This patch is based on KOSAKI's work and I add a little more description, please refer https://lkml.org/lkml/2012/6/14/74. Currently, I found system can enter a state that there are lots of free pages in a zone but only order-0 and order-1 pages which means the zone is heavily fragmented, then high order allocation could make direct reclaim path's long stall(ex, 60 seconds) especially in no swap and no compaciton enviroment. This problem happened on v3.4, but it seems issue still lives in current tree, the reason is do_try_to_free_pages enter live lock: kswapd will go to sleep if the zones have been fully scanned and are still not balanced. As kswapd thinks there's little point trying all over again to avoid infinite loop. Instead it changes order from high-order to 0-order because kswapd think order-0 is the most important. Look at 73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep and may leave zone->all_unreclaimable =3D 0. It assume high-order users can still perform direct reclaim if they wish. Direct reclaim continue to reclaim for a high order which is not a COSTLY_ORDER without oom-killer until kswapd turn on zone->all_unreclaimble= . This is because to avoid too early oom-kill. So it means direct_reclaim depends on kswapd to break this loop. In worst case, direct-reclaim may continue to page reclaim forever when kswapd sleeps forever until someone like watchdog detect and finally kill the process. As described in: http://thread.gmane.org/gmane.linux.kernel.mm/103737 We can't turn on zone->all_unreclaimable from direct reclaim path because direct reclaim path don't take any lock and this way is racy. Thus this patch removes zone->all_unreclaimable field completely and recalculates zone reclaimable state every time. Note: we can't take the idea that direct-reclaim see zone->pages_scanned directly and kswapd continue to use zone->all_unreclaimable. Because, it is racy. commit 929bea7c (vmscan: all_unreclaimable() use zone->all_unreclaimable as a name) describes the detail. [akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()] Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Nick Piggin <npiggin@gmail.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Neil Zhang <zhangwm@marvell.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Reviewed-by:
Minchan Kim <minchan@kernel.org> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Lisa Du <cldu@marvell.com> Signed-off-by:
-
