- 21 Mar, 2019 38 commits
-
-
Huang Rui authored
RLC #53815 ucode has the noise issue on 4k playback while gfxoff enabled. Signed-off-by:
Huang Rui <ray.huang@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Tested-by:
Tom St Denis <tom.stdenis@amd.com> Signed-off-by:
-
Huang Rui authored
This patch enables gfxoff and stutter mode again, since we take more testing on raven series. For raven2 and picasso, we can enable it directly. And for raven, we need check the RLC/SMC ucode version cannot be less than #531/0x1e45. v2: add smc version checking for raven. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in pr_warn message; fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:456:2: warning: variable 'num_of_levels' is used uninitialized whenever '?:' condition is false [-Wsometimes-uninitialized] smu_read_smc_arg(smu, &num_of_levels); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/inc/amdgpu_smu.h:608:3: note: expanded from macro 'smu_read_smc_arg' ((smu)->funcs->read_smc_arg? (smu)->funcs->read_smc_arg((smu), (arg)) : 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:457:7: note: uninitialized use occurs here if (!num_of_levels) { ^~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:456:2: note: remove the '?:' if its condition is always true smu_read_smc_arg(smu, &num_of_levels); ^ drivers/gpu/drm/amd/amdgpu/../powerplay/inc/amdgpu_smu.h:608:3: note: expanded from macro 'smu_read_smc_arg' ((smu)->funcs->read_smc_arg? (smu)->funcs->read_smc_arg((smu), (arg)) : 0) ^ drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:446:27: note: initialize the variable 'num_of_levels' to silence this warning uint32_t i, num_of_levels, clk; ^ = 0 1 warning generated. The if statement it mentions as potentially problematic is currently always true because the read_smc_arg callback is assigned at the bottom of this file but Clang can't tell that. If the callback were ever to disappear, num_of_levels would never be initialized. Just zero initialize it to ensure that the intent behind this code remains the same. Link: https://github.com/ClangBuiltLinux/linux/issues/425Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_move_vram_ram': drivers/gpu/drm/radeon/radeon_ttm.c:254:24: warning: variable 'rdev' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_move_ram_vram': drivers/gpu/drm/radeon/radeon_ttm.c:301:24: warning: variable 'rdev' set but not used [-Wunused-but-set-variable] It's not used since a987fcaa ("ttm: Make parts of a struct ttm_bo_device global.") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Nicholas Kazlauskas authored
We want DRM planes to be initialized in the following order: - primary planes - overlay planes - cursor planes to support existing userspace expectations for plane z-ordering. This means that we also need to register CRTCs after all planes have been initialized since overlay planes can be placed on any CRTC. So the only reason why we have the mode_info->planes list is to remember the primary planes for use later when we need to register the CRTC. Overlay planes have no purpose being in this list. DRM will cleanup any planes that we've registered for us, so the only planes that need to be explicitly cleaned up are the ones that have failed to register. By dropping the explicit free on every plane in the mode_info->planes list this patch also fixes a double-free in the case where we fail to initialize only some of the planes. Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
David Francis authored
[Why] We need arbitrary read/write over DP AUX DPCD for debugging [How] Three debugfs entries Set the target address by writing to "aux_dpcd_address" (The first four bytes written are used) Set the transaction size in bytes by writing to "aux_dpcd_size" (The first four bytes written are used) Start a transaction by reading/writing "aux_dpcd_data" Do note: there is no concerrency protection at all Accessing these entries in quick succession can lead to strange behaviour Signed-off-by:
David Francis <David.Francis@amd.com> Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Leo (Hanghong) Ma authored
[Why] We need to add DP SDP message test debugfs to make sdp message test more convenient and efficient. [How] Add sdp_message debugfs entry in amdgpu. Signed-off-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
-
Leo (Hanghong) Ma authored
[Why] We need to add DP SDP message test debugfs to make sdp message test more convenient and efficient. [How] Add a DM accessible SDP interface for custom data. Signed-off-by:
Roman Li <Roman.Li@amd.com> Acked-by:
-
Dmytro Laktyushkin authored
There are issues removing surfaces/streams when odm is active. This is a step to fix that Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Dmytro Laktyushkin authored
A number of places opp programming was missing for odm second pipe. This change fixes the oversight. Signed-off-by:
-
Dmytro Laktyushkin authored
We fail to reset the second odm combine pipe. This change fixes odm pointer management. Signed-off-by:
-
Dmytro Laktyushkin authored
Releasing planes should not release the 2nd odm pipe right away, this change leaves us with 2 pipes with null planes and same stream when planes are released during odm. Signed-off-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
-
Reza Amini authored
Refactor setting bit fields. Correcting the offset of MD0. Initializing the InfoPacket header fields. Defining the field offsets and masks. Signed-off-by:
Reza Amini <Reza.Amini@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Samson Tam authored
[Why] In certain cases we do link training when we don't have a backend. [How] In dc_link_set_preferred_link_settings(), store preferred link settings first and then verify that the link is DP and the link stream's backend is enabled. If either is false, then we will not do any link retraining. Signed-off-by:
Samson Tam <Samson.Tam@amd.com> Reviewed-by:
-
Wenjing Liu authored
Add these interfacese for future use setup_global_lock() lock_global() pipe_control_lock_global() Signed-off-by:
Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by:
-
Eric Bernstein authored
Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by:
-
Harmanprit Tatla authored
[Why] Currently we are missing a few checks to see if HDR10 is allowed. In particular we never check for the extended colorimetry bit (whether its present or set to 1). Further we don't read in the dpcd block in DC that would provide these bits. [How] - Added in DC code to read in the block containing the extended colorimetry bit. Signed-off-by:
Harmanprit Tatla <Harmanprit.Tatla@amd.com> Reviewed-by:
-
David Francis authored
[Why] Somewhere in the atomic check reshuffle ABM got lost. ABM is a crtc property (copied from a connector property). It can change without a modeset, just like underscan. [How] In the skip_modeset branch of atomic check crtc updates, copy over the abm property. Signed-off-by:
-
Hugo Hu authored
[Why] In HDMI plugfest, MTK report our EMP with VRR_EN bit = 0. VRR_EN bit is EMP-MD0-bit 0. Currently driver set 1 to bit 3. [How] Programming correct VRR_EN bit in EMP-MD0-bit0. Signed-off-by:
Hugo Hu <hugo.hu@amd.com> Reviewed-by:
-
Aric Cyr authored
Signed-off-by:
-
Jun Lei authored
[why] There exist displays with EDIDs > 512 bytes, existing code will cause us to ignore all extension blocks. Signed-off-by:
Jun Lei <Jun.Lei@amd.com> Reviewed-by:
-
Wesley Chalmers authored
Audio was unmuted for HDMI only, need to do so for DP as well. Signed-off-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by:
Chris Park <Chris.Park@amd.com> Reviewed-by:
-
Aric Cyr authored
[Why] Flickering is observed on some displays when the number of inserted BTR frames changes frequently. [How] Add in a margin of drift to prevent the inserted number of frames from jumping around too frequently. Signed-off-by:
-
Charlene Liu authored
[Description] when programming VID_TIMING, we were using the original VESA timing for DP_VIDM/N. for YCbCr420 or compressed YCbCr422, using half rate as YCbCr444. Signed-off-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
Nikola Cornij <Nikola.Cornij@amd.com> Acked-by:
-
Eric Bernstein authored
[Why] Need to set VID_N_MUL for 4:2:0 cases [How] Move setting to enc1_stream_encoder_dp_unblank and ensure it is also set for non-4:2:0 cases. Signed-off-by:
-
Yongqiang Sun authored
Move out of header to dc_helper.c, in preparation for future implementations. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] To help prevent plane state not being set to the correct default value if any new properties are added in the future. [How] Use the drm helper - which seems to be the common solution among other DRM drivers. Signed-off-by:
-
Yongqiang Sun authored
we were only checking the return value in one place, thus changing generic_reg_wait from int to void and reading the register instead of getting it from generic_reg_wait, when we need the return value. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] The plane_reset callback is subclassed but hasn't been updated since the drm helper got updated to include resetting alpha related state (state->alpha and state->pixel_blend_mode). The overlay planes exposed by amdgpu_dm were therefore being rendered as invisible by default ever since supported was exposed for alpha blending properties on overlays. This caused regressions in igt@kms_plane_multiple@atomic-tiling-none and igt@kms_plane@plane-position-covered-pipe tests. [How] Reset the plane state values to their correct values as defined in the drm helper. This fixes the IGT test regression. Signed-off-by:
-
Christian König authored
To aid recoverable page faults. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Christian König authored
We need the first paging queue to handle page faults. v2: handle any number of SDMA instances gracefully Signed-off-by:
-
Christian König authored
Now that we have re-reoute faults to the other IH ring we can enable retries again. Signed-off-by:
-
Wentao Lou authored
add amdgpu_amdkfd_pre_reset and amdgpu_amdkfd_post_reset inside amdgpu_device_reset_sriov. Signed-off-by:
Wentao Lou <Wentao.Lou@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] Incorrect hardcoded assumptions are made regarding luma and chroma alignment. The actual values set for the DRM framebuffer should be used when programming the address. [How] Respect the given pitch for both luma and chroma planes - it's not like we can force the alignment to anything else at this point anyway. Use the FB offset for the chroma planes directly. DRM already provides this to us so there's no need to calculate it manually. While we don't actually use the chroma surface size parameters on Raven, these should have technically been fb->width / 2 and fb->height / 2 since the chroma plane is half size of the luma plane for NV12. Leave a TODO indicating that those should be set based on the actual surface format instead since this is only correct for YUV420 formats. Signed-off-by:
-
Felix Kuehling authored
When page table are updated by the CPU, synchronize with the allocation and initialization of newly allocated page tables. Signed-off-by:
-
Philip Yang authored
If using old kernel config file, CONFIG_ZONE_DEVICE is not selected, so CONFIG_HMM and CONFIG_HMM_MIRROR is not enabled, the current driver error message "Failed to register MMU notifier" is not clear. Inform user with more descriptive message on how to fix the missing kernel config option. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109808Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
- 19 Mar, 2019 2 commits
-
-
Philip Yang authored
userptr may cross two VMAs if the forked child process (not call exec after fork) malloc buffer, then free it, and then malloc larger size buf, kerenl will create new VMA adjacent to old VMA which was cloned from parent process, some pages of userptr are in the first VMA, the rest pages are in the second VMA. HMM expects range only have one VMA, loop over all VMAs in the address range, create multiple ranges to handle this case. See is_mergeable_anon_vma in mm/mmap.c for details. Signed-off-by:
-
Philip Yang authored
Userptr restore may have concurrent userptr invalidation after hmm_vma_fault adds the range to the hmm->ranges list, needs call hmm_vma_range_done to remove the range from hmm->ranges list first, then reschedule the restore worker. Otherwise hmm_vma_fault will add same range to the list, this will cause loop in the list because range->next point to range itself. Add function untrack_invalid_user_pages to reduce code duplication. Signed-off-by:
-
