- 05 Aug, 2010 29 commits
-
-
Marek Vasut authored
Improve formating so checkpatch passes. Also, change some function and variable names to make the naming consistent. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
-
Marek Vasut authored
This huge patch mostly shuffles code. The spitz.c file contained terrible mess and needed a cleanup, here it is: 1) Made every part modular, components are not built in if not selected. 2) Removed loads of preprocessor goo, mostly "#ifdef MACH_AKITA .... #endif" and similar code. The kernel size will grow by a few kb now, but the file is much more readable. 3) Reworked SD/CF power setting function and made it reentrant. 4) Add ISL6271A regulator support 5) Correctly register WM8750 Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
-
Marek Vasut authored
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
-
Marek Vasut authored
This contains common code for Palm LD, TX, T5, Z72, Treo680, Centro This code also adds PMIC support for all the devices, Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
-
Eric Miao authored
Only a small part of used code is moved into sharpsl_pm.h. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Eric Miao authored
READ_GPIO_BIT() is no way generic by accessing GPIO registers directly, replace it with gpio_get_value(). Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Eric Miao authored
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Eric Miao authored
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Christoph Egger authored
IDE_PXA_CF doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Acked-by: Juergen Schindele <schindele@nentec.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Christoph Egger authored
XSCALE_CACHE_ERRATA doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Christoph Egger authored
CORGI_SSP_DEPRECATED doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Christoph Egger authored
ARCH_GUMSTIX_ORIG doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Acked-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Christoph Egger authored
BACKLIGHT_CORGI was later renamed to BACKLIGHT_GENERIC and has not been used since then. As it's now safe to completely transition to LCD_CORGI driver, which incorprates both the LCD and backlight device. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Christoph Egger authored
SHARP_LOCOMO doesn't exist in Kconfig, therefore replacing all references for it with SHARP_LOCOMO in the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
This patch: 1) Simpifies the DRI recomputation routine by pulling out the common code 2) Fixes a bug in PXA27x DRI recomputation caused by incorrect parenthesis Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
The latest PXA3xx DM has enabled 312MHz for the HSS bus, which allows x24 multiplier. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
Add bit definitions of the CPR register of the SCOOP chip into scoop.h. Also, cleanup the GPCR definitions to match coding style. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
Add support for PXA UDC. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
Register TPS65021 regulator in Zipit Z2. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Eric Miao authored
With kexec-based kernel boot loader on Zaurus, the machine ID is actually correctly passed, and head-sharpsl.S is not necessary. Introduce PXA_SHARPSL_DETECT_MACH_ID, and include head-sharpsl.S only when that's explicitly enabled. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Eric Miao authored
1. TOSA related un-hidden options moved to right under MACH_TOSA 2. SHARPSL_PM related hidden options moved to the end of Kconfig Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Eric Miao authored
With a correct dev->dma_mask before calling dmabounce_register_dev(), dma_needs_bounce() is not necessary. The sa1111, though, is a bit complicated. Until it's fully understood and fixed, dma_needs_bounce() for sa1111 is kept if CONFIG_SA1111 is enabled with no side effect (with the condition of machine_is_*) Thanks for Mike Rapoport to fix one error in the original version of the patch and get this tested. Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Eric Miao authored
Cc: Ian Molton <spyro@f2s.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Eric Miao authored
Not tested and enabled on MMP at this moment, and since the IRQ is different from mach-pxa, I'd prefer to move the PMU device back into mach-pxa/. Will introduce the PMU device to MMP once it's enabled and tested. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Igor Grinberg authored
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Igor Grinberg authored
pxa3xx cpu needs the irq type setup to be able to wakeup from low power mode on IRQ_WAKEUPx events. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Jonathan Cameron authored
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
This file is scheduled for removal, therefore fix all devices that use this file to use the suggested wm97xx.h and pass platform data properly. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Tomas Cech <sleep_walker@suse.cz> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
- 18 Jun, 2010 11 commits
-
-
Marek Vasut authored
This patch registers the WM8750 codec on a proper place on the ZipitZ2 machine after the WM8750 driver was converted to new API. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
This patch adds support for the AER915 battery chip into Zipit Z2 platform file. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Daniel Mack authored
Use the resume callback of the pda_power supply framework to check for a 'charge finished' event that might have occured during the sleep phase. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
This is support for custom design based on Toradex Colibri PXA270 CPU card. Initial patch was by Pavel Revak. [daniel - rebased the code to follow the module/board split] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Pavel Revak <palo@bielyvlk.sk> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Daniel Mack authored
Follow the idea of several MX31 based boards and split code that is related to the module from code that is baseboard specific. This makes adding new base board support easier, while avoiding code duplication. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
This patch just moves code around and polishes it. Also, compile in only selected pieces of hardware. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-
Marek Vasut authored
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
-