- 30 Apr, 2008 40 commits
-
-
Jiri Slaby authored
It allows to simplify the code, especially MoxaPortSetBaud. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Tested-by:
Oyvind Aabling <Oyvind.Aabling@uni-c.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Slaby authored
- moxa_flush_chars -- no code; ldics handle this well - moxa_put_char -- only wrapper to moxa_write (same code), tty does this the same way if tty->driver->put_char is NULL Signed-off-by:
-
Jiri Slaby authored
Cleanup of - whitespace - macros - useless casts - return (sth); -> return sth; - types - superfluous parenthesis and braces - init tmp directly in moxa_get_serial_info - commented defunct code - commented prototypes - MOXA/moxa printk case Signed-off-by:
-
Jiri Slaby authored
- add locking to open/close/hangup and ioctl (tiocm) - add pci hot-un-plug support (hangup on board remove, wait for openers) - cleanup block_till_ready - move close code common to close/hangup into separate function to be able to call it from open when hangup occurs while block_till_ready - let ldisc flush on tty layer, it will do it after we return Signed-off-by:
-
Jiri Slaby authored
- del timer after we are sure it won't be fired again - make timer scheduling atomic - don't reschedule timer when all cards have gone Signed-off-by:
-
Jiri Slaby authored
- cleanup types - use tty_prepare_flip_string and io memcpys Signed-off-by:
-
Jiri Slaby authored
- merge 2 timers into one -- one can handle the emptywait as good as the other - merge 2 separated poll functions into one, this allows handle the actions directly and simplifies the code Signed-off-by:
-
Jiri Slaby authored
- allow stats only for sys_admin - move TCSBRK* processing to .break_ctl tty op - let TIOCGSOFTCAR and TIOCSSOFTCAR be processed by ldisc - remove MOXA_GET_MAJOR, MOXA_GET_CUMAJOR - fix jiffies subtraction by time_after - move moxa ioctl numbers into the header; still not exported to userspace, needs _IOC and 32/64 compat cleanup anyways Signed-off-by:
-
Jiri Slaby authored
- schedule timer even after some card is installed, not after insmod - cleanup timer functions Signed-off-by:
-
Jiri Slaby authored
The only relevant sign of port being ready is its board->ready since now. Remove all other flags for this purpose which are set almost on the same place. Move ports inside the board to be sure that nobody will grab reference to the port without being sure that it exists. [jirislaby@gmail.com: fix unused var warning] Signed-off-by:
-
Jiri Slaby authored
Signed-off-by:
-
Jiri Slaby authored
We don't need to hold a reference to port index. In most cases we need port structure anyway and index is available in port->tty->index. Signed-off-by:
-
Jiri Slaby authored
Signed-off-by:
-
Jiri Slaby authored
Substitute ioctl load firmware interface by kernel firmware api. Signed-off-by:
-
Jiri Slaby authored
according to ioctl_list, both have int * as a param, not ulong *. Signed-off-by:
-
Jiri Slaby authored
- request region before remapping pci io space - use ioremap, iounmap istead of iomap interface, because we use readX/writeX for accessing this space because of isa support Signed-off-by:
-
Jiri Slaby authored
Make the code more readable, remap the base address directly. Describe module parameters. Signed-off-by:
-
Jiri Slaby authored
Static ISA field is empty and probably will never be filled in, remove it. The driver still supports ISA cards passed through module parameter. This actually fixes one bug inside the initialization of module-param passed cards initialization. Signed-off-by:
-
Dimitri Sivanich authored
The purpose of this patch to the SGI Altix specific mmtimer (posix timer) driver is to allow a virtually infinite number of timers to be set per node. Timers will now be kept on a sorted per-node list and a single node-based hardware comparator is used to trigger the next timer. [akpm@linux-foundation.org: mark things static] [akpm@linux-foundation.org: fix warning] Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Alan Cox authored
Now we have pushed the lock down we can stop wrapping the call with a lock in the tty layer. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Cox authored
First cut at moving the soft carrier handling knowledge entirely into the core code. One or two drivers still needed to snoop these functions to track CLOCAL internally. Instead make TIOCSSOFTCAR generate the same driver calls as other termios ioctls changing the clocal flag. This allows us to remove any driver knowledge and special casing. Also while we are at it we can fix the error handling. Signed-off-by:
-
Alan Cox authored
This function still depends on the big kernel lock in some cases. Push locking into the function ready for removal of the BKL from ioctl call paths. Signed-off-by:
-
Alan Cox authored
This fixes the last couple of pid struct locking failures I know about. [oleg@tv-sign.ru: clean up do_task_stat()] Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Joe Peterson authored
Refine these behaviors in the N_TTY line discipline: 1) Handle the signal characters consistently when received in a stopped TTY so that SUSP (typically ctrl-Z) behaves like INTR and QUIT in resuming a stopped TTY. 2) Adjust the order in which the IGNCR/ICRNL/INLCR processing is applied to be more logical and consistent with the behavior of other Unix systems. Signed-off-by:
Joe Peterson <joe@skyrush.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Alan Cox authored
Historically tty->pgrp and friends were pid_t and the code "knew" they were safe. The change to pid structs opened up a few races and the removal of the BKL in places made them quite hittable. We put tty->pgrp under the ctrl_lock for the tty. Signed-off-by:
-
Alan Cox authored
- Push the BKL down into the line disciplines - Switch the tty layer to unlocked_ioctl - Introduce a new ctrl_lock spin lock for the control bits - Eliminate much of the lock_kernel use in n_tty - Prepare to (but don't yet) call the drivers with the lock dropped on the paths that historically held the lock BKL now primarily protects open/close/ldisc change in the tty layer [jirislaby@gmail.com: a couple of fixes] Signed-off-by:
-
Alan Cox authored
Instead of checking for the BKL in these methods, take it ourselves. That avoids propogating it into the serial drivers and we can then fix them later on. Signed-off-by:
-
Alan Cox authored
Noticed while auditing the code for the BKL elimination project Signed-off-by:
-
Alan Cox authored
Three things here - Remove softcar handler - Correct termios change detection logic - Wrap break/ioctl in lock_kernel ready to drop it in the caller Signed-off-by:
-
Alan Cox authored
This one could do with some eyeballs on it. In theory it simply wraps the ioctl handler in lock/unlock_kernel ready for the lock/unlocks to be pushed into specific switch values. To do that means changing the code to return via a common exit path not all over the place as it does now, hence the big diff Signed-off-by:
-
Alan Cox authored
For some weird reason I can't ascertain (translation "I think its broken") the viocons driver calls directly into the n_tty ldisc code even if another ldisc is in use. It'll probably break if you do that but I'm just fixing the locking and adding a comment that its horked. Signed-off-by:
-
Alan Cox authored
As these are quite complex I've simply pushed the BKL down into the ioctl handler not tried to do anything neater. Signed-off-by:
-
Alan Cox authored
Wrap the ioctl handler, and in this case the break handler also in the BKL. Remove bogus softcar handlers. Signed-off-by:
-
Alan Cox authored
Remove broken softcar functions, wrap ioctl handler in BKL Signed-off-by:
-
Alan Cox authored
Lock the ioctl handlers and remove bogus softcar handling. Signed-off-by:
-
Alan Cox authored
Kill the softcar handlers again, wrap the ioctl handler in the BKL Signed-off-by:
-
Alan Cox authored
Wrap the ioctl code in lock_kernel calls Signed-off-by:
-
Alan Cox authored
Push the locking down into a couple of functions that need it and remove bogus TIOCG/SSOFTCAR handling Signed-off-by:
-
Alan Cox authored
Push the BKL down into various internal routines in the driver ready to remove it from the break, ioctl and other call points. Signed-off-by:
-
Alan Cox authored
This is an ancient driver so just wrap it in lock_kernel internally and be done. Signed-off-by:
-
