- 19 Jun, 2017 7 commits
-
-
Olof Johansson authored
Merge tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner arm64 DT changes for 4.13 Our usual arm64 changes. The most notable things are the EMAC support and USB support enhancements. There's also support for the SoPine SoM, and the OrangePi Win. * tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support arm64: allwinner: a64: add device tree for SoPine with baseboard arm64: allwinner: bananapi-m64: Enable dwmac-sun8i arm64: allwinner: pine64-plus: Enable dwmac-sun8i arm64: allwinner: pine64: Enable dwmac-sun8i arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver arm64: allwinner: sun50i-a64: Add dt node for the syscon control module arm64: allwinner: a64: add DTSI file for SoPine SoM arm64: allwinner: a64: Convert CCU raw number references to macros arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl arm64: allwinner: a64: enable RSB on A64 arm64: dts: allwinner: pine64: Add remaining UART aliases arm64: dts: allwinner: a64: Add UART2 pin nodes arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64 arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64 Amlogic 64-bit DT changes for v4.13 - cleanup/reorganize alphabetically to better avoid conflicts - add HDMI and CVBS nodes for multiple boards - new pinctrl pins: SPI, HDMI CEC - SCPI: fix thermal sensor reporting New board support - NanoPi K2 (GXBB) - R-Box Pro (GXM) * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (36 commits) ARM64: dts: meson-gxl-s905x-p212: Add HDMI and CVBS nodes ARM64: dts: meson-gxl-s905x-khadas-vim: Add HDMI nodes ARM64: dts: meson-gxl-s905d-p230: Add HDMI nodes ARM64: dts: meson-gxbb-wetek-play2: Add HDMI and CVBS Nodes ARM64: dts: meson-gx: Fix sensors reporting from SCP ARM64: dts: meson-gxl: Add SPI pinctrl nodes ARM64: dts: meson-gxbb: Add SPI pinctrl nodes ARM64: dts: meson-gxl: Add Ethernet PHY LEDS pins nodes ARM64: dts: meson-gxl: Add CEC pins nodes ARM64: dts: meson-gxbb: Add CEC pins nodes ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base ARM64: dts: Fix GXL periphs pinctrl pull-enable register base ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges arm64: dts: amlogic: Add NanoPi K2 dt-bindings: arm: amlogic: Add NanoPi K2 arm64: dts: meson-gxm: Add R-Box Pro dt-bindings: arm: amlogic: Add R-Box Pro dt-bindings: Add Kingnovel vendor prefix arm64: dts: meson-gx-p23x-q20x: Fix node order arm64: dts: meson-gxm-nexbox-a1: Fix node order ... Signed-off-by: Olof Johansson <olof@lixom.net>
-
http://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 4.13. Please note the following from Eric: I've based this summary on the bcm2835-dt-next tag, to clarify what's in this patch series, but it does require being careful since it involves a cross-merge between branches. - Anup documents the Broadcom Stingray binding, common clocks, adds initial support for the Stingray DTSI and DTS files and adds support for the PL022, PL330 and SP805 - Sandeep adds the clock nodes to the Stingray Device Tree nodes - Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes - Oza adds I2C Device Tree nodes to the Stingray DTSes - Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC - Ravijeta adds support for the USB Dual Role PHY on Northstar 2 - Gerd starts adding references to the sdhost and sdhci controllers, and then switches the sdcard to to use the SDHOST (faster than SDHCI) - Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi thermal driver to work correctly * tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux: arm64: dts: NS2: Add USB DRD PHY device tree node ARM64: dts: bcm2837: Define CPU thermal coefficients arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray arm64: dts: Add I2C DT nodes for Stingray SoC arm64: dts: Add GPIO DT nodes for Stingray SOC arm64: dts: Add pinctrl DT nodes for Stingray SOC arm64: dts: Add NAND DT nodes for Stingray SOC arm64: dts: Add clock DT nodes for Stingray SOC arm64: dts: Initial DTS files for Broadcom Stingray SOC dt-bindings: clk: Extend binding doc for Stingray SOC dt-bindings: bcm: Add Broadcom Stingray bindings document ARM: dts: bcm283x: switch from &sdhci to &sdhost arm64: dts: bcm2837: add &sdhci and &sdhost ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6) Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64 UniPhier ARM64 SoC DT updates for v4.13 - specify timing delay properties of eMMC - fix W=1 build warnings - increase memory reserve size - use SPDX License Identifier - add new board support (LD11/LD20 global) * tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: add support for LD20 Global board arm64: dts: uniphier: add support for LD11 Global board arm64: dts: uniphier: use SPDX-License-Identifier arm64: dts: uniphier: reserve more memory for LD11/LD20 arm64: dts: uniphier: fix simple-bus unit address format error arm64: dts: uniphier: Use - instead of @ for DT OPP entries arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC arm64: dts: uniphier: add input-delay properties to Cadence eMMC node Signed-off-by: Olof Johansson <olof@lixom.net>
-
https://github.com/mbgg/linux-mediatekOlof Johansson authored
Add device tree nodes for mt8173: - split USB SuperSpeed port in HighSpeed and SuperSpeed ports. - move USB phy clocks up in hierarchy to met new bindings description - move MDP nodes up in hierarchy to met new bindings description mt6797: - add basic SoC support - add clock driver - add power domain dt-bindings: - clean-up i2c binding description - add binding for mt2701 i2c node - add fallback compatible to scpsys binding description - add bindings description for mt7622 and mt6796 * tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek: dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC arm64: dts: mt8173: Fix mdp device tree dt-bindings: i2c: Add Mediatek MT2701 i2c binding dt-bindings: i2c-mtk: Add mt7623 binding dt-bindings: i2c-mtk: Delete bindings dt-bindings: i2c-mt6577: Rename file to reflect bindings dt-bindings: mtk-sysirq: Correct bindings for supported SoCs arm64: dts: mediatek: add clk and scp nodes for MT6797 dt-bindings: mediatek: add MT6797 power dt-bindings arm64: dts: mediatek: add mt6797 support dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform arm64: dts: mt8173: move clock from phy node into port nodes arm64: dts: mt8173: split usb SuperSpeed port into two ports Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64 Samsung DeviceTree ARM64 update for v4.13: 1. Remove unneeded TE interrupt gpio property. * tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Remove the te-gpios property in the TM2 boards Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64 Support for the new rk3399 firefly board; extending the pcie ranges to make usage of pci switches possible; some more qos and pinctrl nodes on rk3399; updates for the rk3399 cpu operating points including separate opps for the higher rates OP1 variant of the chip and mmc-nodes for the rk3328. * tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: update common rk3399 operating points arm64: dts: rockchip: introduce rk3399-op1 operating points arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly arm64: dts: rockchip: add ethernet0 alias on rk3399 arm64: dts: rockchip: bring rk3399-firefly power-tree in line arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399 arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399 arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals arm64: dts: rockchip: add some missing qos nodes on rk3399 arm64: dts: rockchip: add support for firefly-rk3399 board dt-bindings: add firefly-rk3399 board support Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 13 Jun, 2017 2 commits
-
-
Florian Fainelli authored
This pull request brings in the switch to sdhost for MMC on RPi3 (improving storage performance and leaving sdhci for wireless), and the correct CPU thermal coefficients. The thermal changes required a merge from bcm2835-dt-next, where the nodes were added. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
Jagan Teki authored
Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC. A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB(Win)/2GB(Win Plus) DDR3 SDRAM - Debug TTL UART - Four USB 2.0 - HDMI - LCD - Audio and MIC - Wifi + BT - IR receiver - 5V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 12 Jun, 2017 2 commits
-
-
Kunihiko Hayashi authored
Add initial device tree support for LD20 Global board. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
Kunihiko Hayashi authored
Add initial device tree support for LD11 Global board. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
- 09 Jun, 2017 4 commits
-
-
Neil Armstrong authored
Add HDMI and CVBS nodes for the Amlogic P212 reference board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
Neil Armstrong authored
Add HDMI nodes for the Khadas Vim board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
Neil Armstrong authored
Add HDMI nodes for the Amlogic P230 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
Neil Armstrong authored
Add HDMI and CVBS nodes for the Wetek Play2 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
- 08 Jun, 2017 9 commits
-
-
Raviteja Garimella authored
This patch adds device tree node for USB Dual Role Device PHY for Broadcom's Northstar2 SoC. Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
Stefan Wahren authored
This defines the bcm2837 SoC specific thermal coefficients in order to initialize the thermal driver correctly. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Eduardo Valentin <edubezval@gmail.com>
-
Eric Anholt authored
This merge brings in the cpu-thermal node we in bcm283x that we need in order to set the rpi3's coefficients.
-
Sean Wang authored
This adds dt-binding documentation for MediaTek MT7622 SoC which currently only includes basic items such as ARM CPU, MediaTek SYSIRQ and UART. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Daniel Kurtz authored
If the mdp_* nodes are under an mdp sub-node, their corresponding platform device does not automatically get its iommu assigned properly. Fix this by moving the mdp component nodes up a level such that they are siblings of mdp and all other SoC subsystems. This also simplifies the device tree. Although it fixes iommu assignment issue, it also break compatibility with old device tree. So, the patch in driver is needed to iterate over sibling mdp device nodes, not child ones, to keep driver work properly. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Jun Gao authored
Add MT2701 i2c binding to i2c-mt6577.txt and there is no need to modify i2c driver. Signed-off-by: Jun Gao <jun.gao@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
-
Matthias Brugger authored
The mt7623 dtsi has support for the i2c block, but this is not documented. Add the documentation for SoC mt7623 to de description. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de>
-
Matthias Brugger authored
The bindings file list bindings for mt1827 and mt8135 but these bindings are not supported by the driver. Remove the bindings. Also do some minor style changes to the compatible documentation Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de>
-
Matthias Brugger authored
The i2c-mt6577.txt actually holds the bindings for all mediatek supported i2c controller. Change the name to i2c.mtk.txt to reflect that. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de>
-
- 07 Jun, 2017 14 commits
-
-
Masahiro Yamada authored
Follow the recent trend for the license description, and fix the wrongly stated X11 to MIT. The X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.htmlSigned-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Reserve enough space below the kernel base. The assumed address map is: 80000000 - 80ffffff : for IPP 81000000 - 81ffffff : for ARM secure 82000000 - : for Linux Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
Icenowy Zheng authored
Pine64 have made an official baseboard when SoPine SoM is out. The official baseboard is like the original Pine64 -- but with SD card slot replaced with Pine64's eMMC module slot. Add a device tree for SoPine with the baseboard. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Corentin Labbe authored
The dwmac-sun8i hardware is present on the BananaPi M64. It uses an external PHY rtl8211e via RGMII. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Corentin Labbe authored
The dwmac-sun8i hardware is present on the pine64 plus. It uses an external PHY rtl8211e via RGMII. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Corentin Labbe authored
The dwmac-sun8i hardware is present on the pine64 It uses an external PHY via RMII. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Corentin Labbe authored
The dwmac-sun8i is an Ethernet MAC that supports 10/100/1000 Mbit connections. It is very similar to the device found in the Allwinner H3, but lacks the internal 100 Mbit PHY and its associated control bits. This adds the necessary bits to the Allwinner A64 SoC .dtsi, but keeps it disabled at this level. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Corentin Labbe authored
This patch add the dt node for the syscon register present on the Allwinner A64. Only two register are present in this syscon and the only one useful is the one dedicated to EMAC clock. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Icenowy Zheng authored
SoPine is a SoM by Pine64, which have a gold finger compatible with the slot of DDR3 SODIMM (signals are not compatible), and have an A64, an AXP803, a LPDDR3 DRAM chip, a power led and a MicroSD slot on it. The card detect pin of the MicroSD slot on the SoM is pulled down, which makes it unusable; however, the slot is at the surface of the SoM that is closed to the baseboard, so it's nearly impossible to hot-swap it, thus I make it non-removable. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The A64 device tree file has some remnants of raw number references to the CCU node, likely from when the CCU bindings and device tree changes were first merged. Convert these, and the R_CCU ones, to use the proper defined macros from their respective device tree binding header files. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Andreas Färber authored
Pine64 exposes all A64 UARTs, not just UART0. Since the pins can be used as GPIO, don't enable the new UART nodes by default, but prepare the pinctrl settings to aid in activating them via overlays, i.e., overriding the status property of &uartX nodes. For UART4 (Euler) the safer route of not including RTS/CTS pins is chosen, whereas for UART1 (Bluetooth) they are included. Add the corresponding pinctrl nodes where missing. Suggested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Icenowy Zheng authored
Allwinner A64 have a RSB controller like the one on A23/A33 SoCs. Add it and its pinmux. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Andreas Färber authored
Enabling uart2 node currently leads to a /dev/ttyS1 device, with ttyS0..4 always present, causing confusion on the user's part. dtc cannot resolve an overlay's &uart2 reference for strings, only for phandles, so it would need to hardcode the full node path. Avoid this and enforce reliable numbering by adding serialX aliases for: UART1 - on Wifi/BT connector UART2 - on Pi-2 connector UART3 - on Euler connector UART4 - on Euler connector Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Andreas Färber authored
UART2 is exposed on the Pi connector of Pine64. Make a pinctrl node available at the SoC level, to simplify enabling UART2 via DT overlay. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 06 Jun, 2017 2 commits
-
-
Carlo Caione authored
Switch to use the new compatible for the SCPI sensors so that the sensor readings are reported using the correct scale. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-
Srinath Mannam authored
The Stingray SoC has two instances of SDHCI controller and one instance of iProc PWM. Let's enable above mentioned devices in Stingray DT. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-