Currently fuse_writepages_fill() calls get_fuse_inode() few times with
the same argument.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Retroactively add changelog entry for FUSE protocols 7.1 through 7.8.
Signed-off-by: Alan Somers <asomers@FreeBSD.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Make sure cached writes are not reordered around open(..., O_TRUNC), with
the obvious wrong results.

Fixes: 4d99ff8f ("fuse: Turn writeback cache on")
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

If writeback cache is enabled, then writes might get reordered with
chmod/chown/utimes.  The problem with this is that performing the write in
the fuse daemon might itself change some of these attributes.  In such case
the following sequence of operations will result in file ending up with the
wrong mode, for example:

  int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL);
  write (fd, "1", 1);
  fchown (fd, 0, 0);
  fchmod (fd, 04755);
  close (fd);

This patch fixes this by flushing pending writes before performing
chown/chmod/utimes.
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Fixes: 4d99ff8f ("fuse: Turn writeback cache on")
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Fixes gcc '-Wunused-but-set-variable' warning:

fs/fuse/virtio_fs.c: In function virtio_fs_wake_pending_and_unlock:
fs/fuse/virtio_fs.c:983:20: warning: variable fc set but not used [-Wunused-but-set-variable]

It is not used since commit 7ee1e2e6 ("virtiofs: No need to check
fpq->connected state")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

If regular request queue gets full, currently we sleep for a bit and
retrying submission in submitter's context. This assumes submitter is not
holding any spin lock. But this assumption is not true for background
requests. For background requests, we are called with fc->bg_lock held.

This can lead to deadlock where one thread is trying submission with
fc->bg_lock held while request completion thread has called
fuse_request_end() which tries to acquire fc->bg_lock and gets blocked. As
request completion thread gets blocked, it does not make further progress
and that means queue does not get empty and submitter can't submit more
requests.

To solve this issue, retry submission with the help of a worker, instead of
retrying in submitter's context. We already do this for hiprio/forget
requests.
Reported-by: Chirantan Ekbote <chirantan@chromium.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

If virtqueue is full, we put forget requests on a list and these forgets
are dispatched later using a worker. As of now we don't count these forgets
in fsvq->in_flight variable. This means when queue is being drained, we
have to have special logic to first drain these pending requests and then
wait for fsvq->in_flight to go to zero.

By counting pending forgets in fsvq->in_flight, we can get rid of special
logic and just wait for in_flight to go to zero. Worker thread will kick
and drain all the forgets anyway, leading in_flight to zero.

I also need similar logic for normal request queue in next patch where I am
about to defer request submission in the worker context if queue is full.

This simplifies the code a bit.

Also add two helper functions to inc/dec in_flight. Decrement in_flight
helper will later used to call completion when in_flight reaches zero.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

FR_SENT flag should be set when request has been sent successfully sent
over virtqueue. This is used by interrupt logic to figure out if interrupt
request should be sent or not.

Also add it to fqp->processing list after sending it successfully.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

In virtiofs we keep per queue connected state in virtio_fs_vq->connected
and use that to end request if queue is not connected. And virtiofs does
not even touch fpq->connected state.

We probably need to merge these two at some point of time. For now,
simplify the code a bit and do not worry about checking state of
fpq->connected.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Submission context can hold some locks which end request code tries to hold
again and deadlock can occur. For example, fc->bg_lock. If a background
request is being submitted, it might hold fc->bg_lock and if we could not
submit request (because device went away) and tried to end request, then
deadlock happens. During testing, I also got a warning from deadlock
detection code.

So put requests on a list and end requests from a worker thread.

I got following warning from deadlock detector.

[  603.137138] WARNING: possible recursive locking detected
[  603.137142] --------------------------------------------
[  603.137144] blogbench/2036 is trying to acquire lock:
[  603.137149] 00000000f0f51107 (&(&fc->bg_lock)->rlock){+.+.}, at: fuse_request_end+0xdf/0x1c0 [fuse]
[  603.140701]
[  603.140701] but task is already holding lock:
[  603.140703] 00000000f0f51107 (&(&fc->bg_lock)->rlock){+.+.}, at: fuse_simple_background+0x92/0x1d0 [fuse]
[  603.140713]
[  603.140713] other info that might help us debug this:
[  603.140714]  Possible unsafe locking scenario:
[  603.140714]
[  603.140715]        CPU0
[  603.140716]        ----
[  603.140716]   lock(&(&fc->bg_lock)->rlock);
[  603.140718]   lock(&(&fc->bg_lock)->rlock);
[  603.140719]
[  603.140719]  *** DEADLOCK ***
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

If the FUSE_READDIRPLUS_AUTO feature is enabled, then lookups on a
directory before/during readdir are used as an indication that READDIRPLUS
should be used instead of READDIR.  However if the lookup turns out to be
negative, then selecting READDIRPLUS makes no sense.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Move the check for async request after check for the request being already
finished and done with.

Reported-by: syzbot+ae0bb7aae3de6b4594e2@syzkaller.appspotmail.com
Fixes: d4993774 ("fuse: stop copying args to fuse_req")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Virtio-fs does not accept any mount options, so it's confusing and wrong to
show any in /proc/mounts.

Reported-by: Stefan Hajnoczi <stefanha@redhat.com> 
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

We have been calling it virtio_fs and even file name is virtio_fs.c. Module
name is virtio_fs.ko but when registering file system user is supposed to
specify filesystem type as "virtiofs".

Masayoshi Mizuma reported that he specified filesytem type as "virtio_fs"
and got this warning on console.

  ------------[ cut here ]------------
  request_module fs-virtio_fs succeeded, but still no fs?
  WARNING: CPU: 1 PID: 1234 at fs/filesystems.c:274 get_fs_type+0x12c/0x138
  Modules linked in: ... virtio_fs fuse virtio_net net_failover ...
  CPU: 1 PID: 1234 Comm: mount Not tainted 5.4.0-rc1 #1

So looks like kernel could find the module virtio_fs.ko but could not find
filesystem type after that.

It probably is better to rename module name to virtiofs.ko so that above
warning goes away in case user ends up specifying wrong fs name.
Reported-by: Masayoshi Mizuma <msys.mizuma@gmail.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Pull btrfs fixes from David Sterba:
 "A bunch of fixes that accumulated in recent weeks, mostly material for
  stable.

  Summary:

   - fix for regression from 5.3 that prevents to use balance convert
     with single profile

   - qgroup fixes: rescan race, accounting leak with multiple writers,
     potential leak after io failure recovery

   - fix for use after free in relocation (reported by KASAN)

   - other error handling fixups"

* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
  btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
  btrfs: Fix a regression which we can't convert to SINGLE profile
  btrfs: relocation: fix use-after-free on dead relocation roots
  Btrfs: fix race setting up and completing qgroup rescan workers
  Btrfs: fix missing error return if writeback for extent buffer never started
  btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
  Btrfs: fix selftests failure due to uninitialized i_mode in test inodes

Pull csky updates from Guo Ren:
 "This round of csky subsystem just some fixups:

   - Fix mb() synchronization problem

   - Fix dma_alloc_coherent with PAGE_SO attribute

   - Fix cache_op failed when cross memory ZONEs

   - Optimize arch_sync_dma_for_cpu/device with dma_inv_range

   - Fix ioremap function losing

   - Fix arch_get_unmapped_area() implementation

   - Fix defer cache flush for 610

   - Support kernel non-aligned access

   - Fix 610 vipt cache flush mechanism

   - Fix add zero_fp fixup perf backtrace panic

   - Move static keyword to the front of declaration

   - Fix csky_pmu.max_period assignment

   - Use generic free_initrd_mem()

   - entry: Remove unneeded need_resched() loop"

* tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux:
  csky: Move static keyword to the front of declaration
  csky: entry: Remove unneeded need_resched() loop
  csky: Fixup csky_pmu.max_period assignment
  csky: Fixup add zero_fp fixup perf backtrace panic
  csky: Use generic free_initrd_mem()
  csky: Fixup 610 vipt cache flush mechanism
  csky: Support kernel non-aligned access
  csky: Fixup defer cache flush for 610
  csky: Fixup arch_get_unmapped_area() implementation
  csky: Fixup ioremap function losing
  csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range
  csky/dma: Fixup cache_op failed when cross memory ZONEs
  csky: Fixup dma_alloc_coherent with PAGE_SO attribute
  csky: Fixup mb() synchronization problem

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Pull tracing fixes from Steven Rostedt:
 "A few more tracing fixes:

   - Fix a buffer overflow by checking nr_args correctly in probes

   - Fix a warning that is reported by clang

   - Fix a possible memory leak in error path of filter processing

   - Fix the selftest that checks for failures, but wasn't failing

   - Minor clean up on call site output of a memory trace event"

* tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests/ftrace: Fix same probe error test
  mm, tracing: Print symbol name for call_site in trace events
  tracing: Have error path in predicate_parse() free its allocated memory
  tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro
  tracing/probe: Fix to check the difference of nr_args before adding probe

Pull more MMC updates from Ulf Hansson:
 "A couple more updates/fixes for MMC:

   - sdhci-pci: Add Genesys Logic GL975x support

   - sdhci-tegra: Recover loss in throughput for DMA

   - sdhci-of-esdhc: Fix DMA bug"

* tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: host: sdhci-pci: Add Genesys Logic GL975x support
  mmc: tegra: Implement ->set_dma_mask()
  mmc: sdhci: Let drivers define their DMA mask
  mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
  mmc: sdhci: improve ADMA error reporting

Move the static keyword to the front of declaration of
csky_pmu_of_device_ids, and resolve the following compiler
warning that can be seen when building with warnings
enabled (W=1):

arch/csky/kernel/perf_event.c:1340:1: warning:
  ‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Guo Ren <guoren@kernel.org>

Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Guo Ren <guoren@kernel.org>

Pull Documentation/process update from Greg KH:
 "Here are two small Documentation/process/embargoed-hardware-issues.rst
  file updates that missed my previous char/misc pull request.

  The first one adds an Intel representative for the process, and the
  second one cleans up the text a bit more when it comes to how the
  disclosure rules work, as it was a bit confusing to some companies"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Documentation/process: Clarify disclosure rules
  Documentation/process: Volunteer as the ambassador for Intel

Pull more vfs updates from Al Viro:
 "A couple of misc patches"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  afs dynroot: switch to simple_dir_operations
  fs/handle.c - fix up kerneldoc

Pull more cifs updates from Steve French:
 "Fixes from the recent SMB3 Test events and Storage Developer
  Conference (held the last two weeks).

  Here are nine smb3 patches including an important patch for debugging
  traces with wireshark, with three patches marked for stable.

  Additional fixes from last week to better handle some newly discovered
  reparse points, and a fix the create/mkdir path for setting the mode
  more atomically (in SMB3 Create security descriptor context), and one
  for path name processing are still being tested so are not included
  here"

* tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix oplock handling for SMB 2.1+ protocols
  smb3: missing ACL related flags
  smb3: pass mode bits into create calls
  smb3: Add missing reparse tags
  CIFS: fix max ea value size
  fs/cifs/sess.c: Remove set but not used variable 'capabilities'
  fs/cifs/smb2pdu.c: Make SMB2_notify_init static
  smb3: fix leak in "open on server" perf counter
  smb3: allow decryption keys to be dumped by admin for debugging

The csky_pmu.max_period has type u64, and BIT() can only return
32 bits unsigned long on C-SKY. The initialization for max_period
will be incorrect when count_width is bigger than 32.

Use BIT_ULL()
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <ren_guo@c-sky.com>

We need set fp zero to let backtrace know the end. The patch fixup perf
callchain panic problem, because backtrace didn't know what is the end
of fp.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reported-by: Mao Han <han_mao@c-sky.com>

The csky implementation of free_initrd_mem() is an open-coded version of
free_reserved_area() without poisoning.

Remove it and make csky use the generic version of free_initrd_mem().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Guo Ren <guoren@kernel.org>

Merge active entropy generation updates.

This is admittedly partly "for discussion".  We need to have a way
forward for the boot time deadlocks where user space ends up waiting for
more entropy, but no entropy is forthcoming because the system is
entirely idle just waiting for something to happen.

While this was triggered by what is arguably a user space bug with
GDM/gnome-session asking for secure randomness during early boot, when
they didn't even need any such truly secure thing, the issue ends up
being that our "getrandom()" interface is prone to that kind of
confusion, because people don't think very hard about whether they want
to block for sufficient amounts of entropy.

The approach here-in is to decide to not just passively wait for entropy
to happen, but to start actively collecting it if it is missing.  This
is not necessarily always possible, but if the architecture has a CPU
cycle counter, there is a fair amount of noise in the exact timings of
reasonably complex loads.

We may end up tweaking the load and the entropy estimates, but this
should be at least a reasonable starting point.

As part of this, we also revert the revert of the ext4 IO pattern
improvement that ended up triggering the reported lack of external
entropy.

* getrandom() active entropy waiting:
  Revert "Revert "ext4: make __ext4_get_inode_loc plug""
  random: try to actively add entropy rather than passively wait for it

This reverts commit 72dbcf72.

Instead of waiting forever for entropy that may just not happen, we now
try to actively generate entropy when required, and are thus hopefully
avoiding the problem that caused the nice ext4 IO pattern fix to be
reverted.

So revert the revert.

Cc: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For 5.3 we had to revert a nice ext4 IO pattern improvement, because it
caused a bootup regression due to lack of entropy at bootup together
with arguably broken user space that was asking for secure random
numbers when it really didn't need to.

See commit 72dbcf72 (Revert "ext4: make __ext4_get_inode_loc plug").

This aims to solve the issue by actively generating entropy noise using
the CPU cycle counter when waiting for the random number generator to
initialize.  This only works when you have a high-frequency time stamp
counter available, but that's the case on all modern x86 CPU's, and on
most other modern CPU's too.

What we do is to generate jitter entropy from the CPU cycle counter
under a somewhat complex load: calling the scheduler while also
guaranteeing a certain amount of timing noise by also triggering a
timer.

I'm sure we can tweak this, and that people will want to look at other
alternatives, but there's been a number of papers written on jitter
entropy, and this should really be fairly conservative by crediting one
bit of entropy for every timer-induced jump in the cycle counter.  Not
because the timer itself would be all that unpredictable, but because
the interaction between the timer and the loop is going to be.

Even if (and perhaps particularly if) the timer actually happens on
another CPU, the cacheline interaction between the loop that reads the
cycle counter and the timer itself firing is going to add perturbations
to the cycle counter values that get mixed into the entropy pool.

As Thomas pointed out, with a modern out-of-order CPU, even quite simple
loops show a fair amount of hard-to-predict timing variability even in
the absense of external interrupts.  But this tries to take that further
by actually having a fairly complex interaction.

This is not going to solve the entropy issue for architectures that have
no CPU cycle counter, but it's not clear how (and if) that is solvable,
and the hardware in question is largely starting to be irrelevant.  And
by doing this we can at least avoid some of the even more contentious
approaches (like making the entropy waiting time out in order to avoid
the possibly unbounded waiting).

Cc: Ahmed Darwish <darwish.07@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Nicholas Mc Guire <hofrat@opentech.at>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omap variants

Few fixes for ti-sysc interconnect target module driver for no-idle
quirks that caused nfsroot to fail on some dra7 boards.

And let's fixes to get LCD working again for logicpd board that got
broken a while back with removal of panel-dpi driver. We need to now
use generic CONFIG_DRM_PANEL_SIMPLE instead.

* tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

ARM SCMI fixes for v5.4

Couple of fixes: one in scmi reset driver initialising missed scmi handle
and an other in scmi reset API implementation fixing the assignment of
reset state

* tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset

Link: https://lore.kernel.org/r/20190918142139.GA4370@bogusSigned-off-by: Olof Johansson <olof@lixom.net>

More libnvdimm updates from Dan Williams:

 - Complete the reworks to interoperate with powerpc dynamic huge page
   sizes

 - Fix a crash due to missed accounting for the powerpc 'struct
   page'-memmap mapping granularity

 - Fix badblock initialization for volatile (DRAM emulated) pmem ranges

 - Stop triggering request_key() notifications to userspace when
   NVDIMM-security is disabled / not present

 - Miscellaneous small fixups

* tag 'libnvdimm-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/region: Enable MAP_SYNC for volatile regions
  libnvdimm: prevent nvdimm from requesting key when security is disabled
  libnvdimm/region: Initialize bad block for volatile namespaces
  libnvdimm/nfit_test: Fix acpi_handle redefinition
  libnvdimm/altmap: Track namespace boundaries in altmap
  libnvdimm: Fix endian conversion issues 
  libnvdimm/dax: Pick the right alignment default when creating dax devices
  powerpc/book3s64: Export has_transparent_hugepage() related functions.

Pull thermal SoC updates from Eduardo Valentin:
 "This is a really small pull in the midst of a lot of pending patches.

  We are in the middle of restructuring how we are maintaining the
  thermal subsystem, as per discussion in our last LPC. For now, I am
  sending just some changes that were pending in my tree. Looking
  forward to get a more streamlined process in the next merge window"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: db8500: Rewrite to be a pure OF sensor
  thermal: db8500: Use dev helper variable
  thermal: db8500: Finalize device tree conversion
  thermal: thermal_mmio: remove some dead code

Pull  more i2c updates from Wolfram Sang:

 - make Lenovo Yoga C630 boot now that the dependencies are merged

 - restore BlockProcessCall for i801, accidently removed in this merge
   window

 - a bugfix for the riic driver

 - an improvement to the slave-eeprom driver which should have been in
   the first pull request but sadly got lost in the process

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: slave-eeprom: Add read only mode
  i2c: i801: Bring back Block Process Call support for certain platforms
  i2c: riic: Clear NACK in tend isr
  i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630

Pull iommu fixes from Joerg Roedel:
 "A couple of fixes for the AMD IOMMU driver have piled up:

   - Some fixes for the reworked IO page-table which caused memory leaks
     or did not allow to downgrade mappings under some conditions.

   - Locking fixes to fix a couple of possible races around accessing
     'struct protection_domain'. The races got introduced when the
     dma-ops path became lock-less in the fast-path"

* tag 'iommu-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Lock code paths traversing protection_domain->dev_list
  iommu/amd: Lock dev_data in attach/detach code paths
  iommu/amd: Check for busy devices earlier in attach_device()
  iommu/amd: Take domain->lock for complete attach/detach path
  iommu/amd: Remove amd_iommu_devtable_lock
  iommu/amd: Remove domain->updated
  iommu/amd: Wait for completion of IOTLB flush in attach_device
  iommu/amd: Unmap all L7 PTEs when downgrading page-sizes
  iommu/amd: Introduce first_pte_l7() helper
  iommu/amd: Fix downgrading default page-sizes in alloc_pte()
  iommu/amd: Fix pages leak in free_pagetable()

The role of the contact list provided by the disclosing party and how it
affects the disclosure process and the ability to include experts into
the development process is not really well explained.

Neither is it entirely clear when the disclosing party will be informed
about the fact that a developer who is not covered by an employer NDA needs
to be brought in and disclosed.

Explain the role of the contact list and the information policy along with
an eventual conflict resolution better.
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.1909251028390.10825@nanos.tec.linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull networking fixes from David Miller:

 1) Sanity check URB networking device parameters to avoid divide by
    zero, from Oliver Neukum.

 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
    don't work properly. Longer term this needs a better fix tho. From
    Vijay Khemka.

 3) Small fixes to selftests (use ping when ping6 is not present, etc.)
    from David Ahern.

 4) Bring back rt_uses_gateway member of struct rtable, it's semantics
    were not well understood and trying to remove it broke things. From
    David Ahern.

 5) Move usbnet snaity checking, ignore endpoints with invalid
    wMaxPacketSize. From Bjørn Mork.

 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.

 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
    Alex Vesker, and Yevgeny Kliteynik

 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.

 9) Fix crash when removing sch_cbs entry while offloading is enabled,
    from Vinicius Costa Gomes.

10) Signedness bug fixes, generally in looking at the result given by
    of_get_phy_mode() and friends. From Dan Crapenter.

11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.

12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.

13) Fix quantization code in tcp_bbr, from Kevin Yang.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
  net: tap: clean up an indentation issue
  nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
  tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
  sk_buff: drop all skb extensions on free and skb scrubbing
  tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
  mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
  Documentation: Clarify trap's description
  mlxsw: spectrum: Clear VLAN filters during port initialization
  net: ena: clean up indentation issue
  NFC: st95hf: clean up indentation issue
  net: phy: micrel: add Asym Pause workaround for KSZ9021
  net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
  ptp: correctly disable flags on old ioctls
  lib: dimlib: fix help text typos
  net: dsa: microchip: Always set regmap stride to 1
  nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
  nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
  net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
  vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
  net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
  ...

Merge hugepage allocation updates from David Rientjes:
 "We (mostly Linus, Andrea, and myself) have been discussing offlist how
  to implement a sane default allocation strategy for hugepages on NUMA
  platforms.

  With these reverts in place, the page allocator will happily allocate
  a remote hugepage immediately rather than try to make a local hugepage
  available. This incurs a substantial performance degradation when
  memory compaction would have otherwise made a local hugepage
  available.

  This series reverts those reverts and attempts to propose a more sane
  default allocation strategy specifically for hugepages. Andrea
  acknowledges this is likely to fix the swap storms that he originally
  reported that resulted in the patches that removed __GFP_THISNODE from
  hugepage allocations.

  The immediate goal is to return 5.3 to the behavior the kernel has
  implemented over the past several years so that remote hugepages are
  not immediately allocated when local hugepages could have been made
  available because the increased access latency is untenable.

  The next goal is to introduce a sane default allocation strategy for
  hugepages allocations in general regardless of the configuration of
  the system so that we prevent thrashing of local memory when
  compaction is unlikely to succeed and can prefer remote hugepages over
  remote native pages when the local node is low on memory."

Note on timing: this reverts the hugepage VM behavior changes that got
introduced fairly late in the 5.3 cycle, and that fixed a huge
performance regression for certain loads that had been around since
4.18.

Andrea had this note:

 "The regression of 4.18 was that it was taking hours to start a VM
  where 3.10 was only taking a few seconds, I reported all the details
  on lkml when it was finally tracked down in August 2018.

     https://lore.kernel.org/linux-mm/20180820032640.9896-2-aarcange@redhat.com/

  __GFP_THISNODE in MADV_HUGEPAGE made the above enterprise vfio
  workload degrade like in the "current upstream" above. And it still
  would have been that bad as above until 5.3-rc5"

where the bad behavior ends up happening as you fill up a local node,
and without that change, you'd get into the nasty swap storm behavior
due to compaction working overtime to make room for more memory on the
nodes.

As a result 5.3 got the two performance fix reverts in rc5.

However, David Rientjes then noted that those performance fixes in turn
regressed performance for other loads - although not quite to the same
degree.  He suggested reverting the reverts and instead replacing them
with two small changes to how hugepage allocations are done (patch
descriptions rephrased by me):

 - "avoid expensive reclaim when compaction may not succeed": just admit
   that the allocation failed when you're trying to allocate a huge-page
   and compaction wasn't successful.

 - "allow hugepage fallback to remote nodes when madvised": when that
   node-local huge-page allocation failed, retry without forcing the
   local node.

but by then I judged it too late to replace the fixes for a 5.3 release.
So 5.3 was released with behavior that harked back to the pre-4.18 logic.

But now we're in the merge window for 5.4, and we can see if this
alternate model fixes not just the horrendous swap storm behavior, but
also restores the performance regression that the late reverts caused.

Fingers crossed.

* emailed patches from David Rientjes <rientjes@google.com>:
  mm, page_alloc: allow hugepage fallback to remote nodes when madvised
  mm, page_alloc: avoid expensive reclaim when compaction may not succeed
  Revert "Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask""
  Revert "Revert "mm, thp: restore node-local hugepage allocations""