- 20 Jun, 2013 12 commits
-
-
Jeremy Kerr authored
Based on benh's proposal at https://lists.ozlabs.org/pipermail/linuxppc-dev/2012-September/101237.html, this change provides support for reserving memory from the reserved-ranges node at the root of the device tree. We just call memblock_reserve on these ranges for now. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Daniel Walker authored
There appears to be no good reason to keep this as 64bit only. It works on 32bit also, and has checks so that it can work correctly with 32bit binaries on 64bit hardware which is why I think this works. I tested this on qemu using the virtex-ml507 machine type. Before, /bin2 # ./test & cat /proc/${!}/maps 00100000-00103000 r-xp 00000000 00:00 0 [vdso] 10000000-10007000 r-xp 00000000 00:01 454 /bin2/test 10017000-10018000 rw-p 00007000 00:01 454 /bin2/test 48000000-48020000 r-xp 00000000 00:01 224 /lib/ld-2.11.3.so 48021000-48023000 rw-p 00021000 00:01 224 /lib/ld-2.11.3.so bfd03000-bfd24000 rw-p 00000000 00:00 0 [stack] /bin2 # ./test & cat /proc/${!}/maps 00100000-00103000 r-xp 00000000 00:00 0 [vdso] 0fe6e000-0ffd8000 r-xp 00000000 00:01 214 /lib/libc-2.11.3.so 0ffd8000-0ffe8000 ---p 0016a000 00:01 214 /lib/libc-2.11.3.so 0ffe8000-0ffed000 rw-p 0016a000 00:01 214 /lib/libc-2.11.3.so 0ffed000-0fff0000 rw-p 00000000 00:00 0 10000000-10007000 r-xp 00000000 00:01 454 /bin2/test 10017000-10018000 rw-p 00007000 00:01 454 /bin2/test 48000000-48020000 r-xp 00000000 00:01 224 /lib/ld-2.11.3.so 48020000-48021000 rw-p 00000000 00:00 0 48021000-48023000 rw-p 00021000 00:01 224 /lib/ld-2.11.3.so bf98a000-bf9ab000 rw-p 00000000 00:00 0 [stack] /bin2 # ./test & cat /proc/${!}/maps 00100000-00103000 r-xp 00000000 00:00 0 [vdso] 0fe6e000-0ffd8000 r-xp 00000000 00:01 214 /lib/libc-2.11.3.so 0ffd8000-0ffe8000 ---p 0016a000 00:01 214 /lib/libc-2.11.3.so 0ffe8000-0ffed000 rw-p 0016a000 00:01 214 /lib/libc-2.11.3.so 0ffed000-0fff0000 rw-p 00000000 00:00 0 10000000-10007000 r-xp 00000000 00:01 454 /bin2/test 10017000-10018000 rw-p 00007000 00:01 454 /bin2/test 48000000-48020000 r-xp 00000000 00:01 224 /lib/ld-2.11.3.so 48020000-48021000 rw-p 00000000 00:00 0 48021000-48023000 rw-p 00021000 00:01 224 /lib/ld-2.11.3.so bfa54000-bfa75000 rw-p 00000000 00:00 0 [stack] After, bash-4.1# ./test & cat /proc/${!}/maps [7] 803 00100000-00103000 r-xp 00000000 00:00 0 [vdso] 10000000-10007000 r-xp 00000000 00:01 454 /bin2/test 10017000-10018000 rw-p 00007000 00:01 454 /bin2/test b7eb0000-b7ed0000 r-xp 00000000 00:01 224 /lib/ld-2.11.3.so b7ed1000-b7ed3000 rw-p 00021000 00:01 224 /lib/ld-2.11.3.so bfbc0000-bfbe1000 rw-p 00000000 00:00 0 [stack] bash-4.1# ./test & cat /proc/${!}/maps [8] 805 00100000-00103000 r-xp 00000000 00:00 0 [vdso] 10000000-10007000 r-xp 00000000 00:01 454 /bin2/test 10017000-10018000 rw-p 00007000 00:01 454 /bin2/test b7b03000-b7b23000 r-xp 00000000 00:01 224 /lib/ld-2.11.3.so b7b24000-b7b26000 rw-p 00021000 00:01 224 /lib/ld-2.11.3.so bfc27000-bfc48000 rw-p 00000000 00:00 0 [stack] bash-4.1# ./test & cat /proc/${!}/maps [9] 807 00100000-00103000 r-xp 00000000 00:00 0 [vdso] 10000000-10007000 r-xp 00000000 00:01 454 /bin2/test 10017000-10018000 rw-p 00007000 00:01 454 /bin2/test b7f37000-b7f57000 r-xp 00000000 00:01 224 /lib/ld-2.11.3.so b7f58000-b7f5a000 rw-p 00021000 00:01 224 /lib/ld-2.11.3.so bff96000-bffb7000 rw-p 00000000 00:00 0 [stack] Signed-off-by: Daniel Walker <dwalker@fifo90.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kevin Hao authored
Previously in order to handle the edge sensitive decrementers, we choose to set the decrementer to 1 to trigger a decrementer interrupt when re-enabling interrupts. But with the rework of the lazy EE, we would replay the decrementer interrupt when re-enabling interrupts if a decrementer interrupt occurs with irq soft-disabled. So there is no need to trigger a decrementer interrupt in this case any more. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Scott Wood authored
This happens with threads that are offline due to CPU hotplug (including threads that were never "plugged in" to begin with because SMT is disabled). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Suzuki K. Poulose authored
This patch moves the single step enable code used by kprobe to a generic routine header so that, it can be re-used by other code, in this case, uprobes. No functional changes. Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Cc: Ananth N Mavinakaynahalli <ananth@in.ibm.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: linuxppc-dev@ozlabs.org Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Suzuki K. Poulose authored
External/Decrement exceptions have lower priority than the Debug Exception. So, we don't have to disable the External interrupts before a single step. However, on BookE, Critical Input Exception(CE) has higher priority than a Debug Exception. Hence we mask them. Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Ananth N Mavinakaynahalli <ananth@in.ibm.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Thomas Gleixner authored
These low level handlers cannot be threaded. Mark them NO_THREAD Reported-by: leroy christophe <christophe.leroy@c-s.fr> Tested-by: leroy christophe <christophe.leroy@c-s.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
Architectures like powerpc use the deposited pgtable to store hash index values. We need to make the deposted pgtable is visible to other cpus before we are ready to take a hash fault. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
For architectures like powerpc that support multiple explicit hugepage sizes, HPAGE_SHIFT indicate the default explicit hugepage shift. For THP to work the hugepage size should be same as PMD_SIZE. So use PMD_SHIFT directly. So move the define outside CONFIG_TRANSPARENT_HUGEPAGE #ifdef because we want to use these defines in generic code with if (pmd_trans_huge()) conditional. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
For architectures like ppc64 we look at deposited pgtable when calling pmdp_get_and_clear. So do the pgtable_trans_huge_withdraw after finishing pmdp related operations. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
This will be later used by powerpc THP support. In powerpc we want to use pgtable for storing the hash index values. So instead of adding them to mm_context list, we would like to store them in the second half of pmd Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
We should use pmdp_set_access_flags to update access flags. Archs like powerpc use extra checks(_PAGE_BUSY) when updating a hugepage PTE. A set_pmd_at doesn't do those checks. We should use set_pmd_at only when updating a none hugepage PTE. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com>a Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 13 Jun, 2013 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "This is an alternative fix for the regression introduced in 3.9 whose previous fix had to be reverted right before 3.10-rc5, because it broke one of the Tony's machines. In this one the check is confined to the ACPI video driver (which is the only one causing the problem to happen in the first place) and the Tony's box shouldn't even notice it. - ACPI fix for an issue causing ACPI video driver to attempt to bind to devices it shouldn't touch from Rafael J Wysocki." * tag 'acpi-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Do not bind to device objects with a scan handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "Another set of fixes, the biggest bit of this is yet another tweak to the UEFI anti-bricking code; apparently we finally got some feedback from Samsung as to what makes at least their systems fail. This set should actually fix the boot regressions that some other systems (e.g. SGI) have exhibited. Other than that, there is a patch to avoid a panic with particularly unhappy memory layouts and two minor protocol fixes which may or may not be manifest bugs" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix typo in kexec register clearing x86, relocs: Move __vvar_page from S_ABS to S_REL Modify UEFI anti-bricking code x86: Fix adjust_range_size_mask calling position
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcuLinus Torvalds authored
Pull RCU fixes from Paul McKenney: "I must confess that this past merge window was not RCU's best showing. This series contains three more fixes for RCU regressions: 1. A fix to __DECLARE_TRACE_RCU() that causes it to act as an interrupt from idle rather than as a task switch from idle. This change is needed due to the recent use of _rcuidle() tracepoints that can be invoked from interrupt handlers as well as from idle. Without this fix, invoking _rcuidle() tracepoints from interrupt handlers results in splats and (more seriously) confusion on RCU's part as to whether a given CPU is idle or not. This confusion can in turn result in too-short grace periods and therefore random memory corruption. 2. A fix to a subtle deadlock that could result due to RCU doing a wakeup while holding one of its rcu_node structure's locks. Although the probability of occurrence is low, it really does happen. The fix, courtesy of Steven Rostedt, uses irq_work_queue() to avoid the deadlock. 3. A fix to a silent deadlock (invisible to lockdep) due to the interaction of timeouts posted by RCU debug code enabled by CONFIG_PROVE_RCU_DELAY=y, grace-period initialization, and CPU hotplug operations. This will not occur in production kernels, but really does occur in randconfig testing. Diagnosis courtesy of Steven Rostedt" * 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu: Fix deadlock with CPU hotplug, RCU GP init, and timer migration rcu: Don't call wakeup() with rcu_node structure ->lock held trace: Allow idle-safe tracepoints to be called from irq
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Three kvm related memory management fixes, a fix for show_trace, a fix for early console output and a patch from Ben to help prevent compile errors in regard to irq functions (or our lack thereof)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: Implement IRQ functions if !PCI s390/sclp: fix new line detection s390/pgtable: make pgste lock an explicit barrier s390/pgtable: Save pgste during modify_prot_start/commit s390/dumpstack: fix address ranges for asynchronous and panic stack s390/pgtable: Fix guest overindication for change bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/soundLinus Torvalds authored
Pull ASoC sound updates from Mark Brown: "Takashi is travelling at the minute and it'd be good to get the MAINTAINERS update in here merged so sending directly. As well as the usual driver specifics we've got a couple of core fixes here, one fixing capabilities for unidirectional streams and the other fixing suspend while audio streams are active. The suspend fix is a little involved but mostly as a result of removing some special casing that was doing the wrong thing." * tag 'asoc-v3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound: ASoC: tlv320aic3x: Remove deadlock from snd_soc_dapm_put_volsw_aic3x() ASoC: dapm: Treat DAI widgets like AIF widgets for power ASoC: arizona: Correct AEC loopback enable ASoC: pcm: Require both CODEC and CPU support when declaring stream caps MAINTAINERS: Remove myself from Wolfson maintainers ASoC: wm8994: Ensure microphone detection state is reset on removal ASoC: wm8994: Avoid leaking pm_runtime reference on removed jack race ASoC: cs42l52: fix hp_gain_enum shift value. ASoC: cs42l52: use correct PCM mixer TLV dB scale to match datasheet.
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md bugfixes from Neil Brown: "A few bugfixes for md Some tagged for -stable" * tag 'md-3.10-fixes' of git://neil.brown.name/md: md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place md/raid1,raid10: use freeze_array in place of raise_barrier in various places. md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it. md: md_stop_writes() should always freeze recovery.
-
Josh Triplett authored
On platforms with C8-C10 support, the additional C-states cause turbostat to overrun its output buffer of 128 bytes per CPU. Increase this to 256 bytes per CPU. [ As a bugfix, this should go into 3.10; however, since the C8-C10 support didn't go in until after 3.9, this need not go into any stable kernel. ] Signed-off-by: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <len.brown@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
H. Peter Anvin authored
* More tweaking to the EFI variable anti-bricking algorithm. Quite a few users were reporting boot regressions in v3.9. This has now been fixed with a more accurate "minimum storage requirement to avoid bricking" value from Samsung (5K instead of 50%) and code to trigger garbage collection when we near our limit - Matthew Garrett. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
H. Peter Anvin authored
There are cases where the kernel will believe that the WRITE SAME command is supported by a block device which does not, in fact, support WRITE SAME. This currently happens for SATA drivers behind a SAS controller, but there are probably a hundred other ways that can happen, including drive firmware bugs. After receiving an error for WRITE SAME the block layer will retry the request as a plain write of zeroes, but mdraid will consider the failure as fatal and consider the drive failed. This has the effect that all the mirrors containing a specific set of data are each offlined in very rapid succession resulting in data loss. However, just bouncing the request back up to the block layer isn't ideal either, because the whole initial request-retry sequence should be inside the write bitmap fence, which probably means that md needs to do its own conversion of WRITE SAME to write zero. Until the failure scenario has been sorted out, disable WRITE SAME for raid1, raid5, and raid10. [neilb: added raid5] This patch is appropriate for any -stable since 3.7 when write_same support was added. Cc: stable@vger.kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
Various places in raid1 and raid10 are calling raise_barrier when they really should call freeze_array. The former is only intended to be called from "make_request". The later has extra checks for 'nr_queued' and makes a call to flush_pending_writes(), so it is safe to call it from within the management thread. Using raise_barrier will sometimes deadlock. Using freeze_array should not. As 'freeze_array' currently expects one request to be pending (in handle_read_error - the only previous caller), we need to pass it the number of pending requests (extra) to ignore. The deadlock was made particularly noticeable by commits 050b6615 (raid10) and 6b740b8d (raid1) which appeared in 3.4, so the fix is appropriate for any -stable kernel since then. This patch probably won't apply directly to some early kernels and will need to be applied by hand. Cc: stable@vger.kernel.org Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
-
Alex Lyakas authored
md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it. Without that fix, the following scenario could happen: - RAID1 with drives A and B; drive B was freshly-added and is rebuilding - Drive A fails - WRITE request arrives to the array. It is failed by drive A, so r1_bio is marked as R1BIO_WriteError, but the rebuilding drive B succeeds in writing it, so the same r1_bio is marked as R1BIO_Uptodate. - r1_bio arrives to handle_write_finished, badblocks are disabled, md_error()->error() does nothing because we don't fail the last drive of raid1 - raid_end_bio_io() calls call_bio_endio() - As a result, in call_bio_endio(): if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) clear_bit(BIO_UPTODATE, &bio->bi_flags); this code doesn't clear the BIO_UPTODATE flag, and the whole master WRITE succeeds, back to the upper layer. So we returned success to the upper layer, even though we had written the data onto the rebuilding drive only. But when we want to read the data back, we would not read from the rebuilding drive, so this data is lost. [neilb - applied identical change to raid10 as well] This bug can result in lost data, so it is suitable for any -stable kernel. Cc: stable@vger.kernel.org Signed-off-by: Alex Lyakas <alex@zadarastorage.com> Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
__md_stop_writes() will currently sometimes freeze recovery. So any caller must be ready for that to happen, and indeed they are. However if __md_stop_writes() doesn't freeze_recovery, then a recovery could start before mddev_suspend() is called, which could be awkward. This can particularly cause problems or dm-raid. So change __md_stop_writes() to always freeze recovery. This is safe and more predicatable. Reported-by: Brassow Jonathan <jbrassow@redhat.com> Tested-by: Brassow Jonathan <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking update from David Miller: 1) Fix dump iterator in nfnl_acct_dump() and ctnl_timeout_dump() to dump all objects properly, from Pablo Neira Ayuso. 2) xt_TCPMSS must use the default MSS of 536 when no MSS TCP option is present. Fix from Phil Oester. 3) qdisc_get_rtab() looks for an existing matching rate table and uses that instead of creating a new one. However, it's key matching is incomplete, it fails to check to make sure the ->data[] array is identical too. Fix from Eric Dumazet. 4) ip_vs_dest_entry isn't fully initialized before copying back to userspace, fix from Dan Carpenter. 5) Fix ubuf reference counting regression in vhost_net, from Jason Wang. 6) When sock_diag dumps a socket filter back to userspace, we have to translate it out of the kernel's internal representation first. From Nicolas Dichtel. 7) davinci_mdio holds a spinlock while calling pm_runtime, which sleeps. Fix from Sebastian Siewior. 8) Timeout check in sh_eth_check_reset is off by one, from Sergei Shtylyov. 9) If sctp socket init fails, we can NULL deref during cleanup. Fix from Daniel Borkmann. 10) netlink_mmap() does not propagate errors properly, from Patrick McHardy. 11) Disable powersave and use minstrel by default in ath9k. From Sujith Manoharan. 12) Fix a regression in that SOCK_ZEROCOPY is not set on tuntap sockets which prevents vhost from being able to use zerocopy. From Jason Wang. 13) Fix race between port lookup and TX path in team driver, from Jiri Pirko. 14) Missing length checks in bluetooth L2CAP packet parsing, from Johan Hedberg. 15) rtlwifi fails to connect to networking using any encryption method other than WPA2. Fix from Larry Finger. 16) Fix iwlegacy build due to incorrect CONFIG_* ifdeffing for power management stuff. From Yijing Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) b43: stop format string leaking into error msgs ath9k: Use minstrel rate control by default Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity" ath9k: Disable PowerSave by default net: wireless: iwlegacy: fix build error for il_pm_ops rtlwifi: Fix a false leak indication for PCI devices wl12xx/wl18xx: scan all 5ghz channels wl12xx: increase minimum singlerole firmware version required wl12xx: fix minimum required firmware version for wl127x multirole rtlwifi: rtl8192cu: Fix problem in connecting to WEP or WPA(1) networks mwifiex: debugfs: Fix out of bounds array access Bluetooth: Fix mgmt handling of power on failures Bluetooth: Fix missing length checks for L2CAP signalling PDUs Bluetooth: btmrvl: support Marvell Bluetooth device SD8897 Bluetooth: Fix checks for LE support on LE-only controllers team: fix checks in team_get_first_port_txable_rcu() team: move add to port list before port enablement team: check return value of team_get_port_by_index_rcu() for NULL tuntap: set SOCK_ZEROCOPY flag during open netlink: fix error propagation in netlink_mmap() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull input layer bugfix from Jiri Kosina: "Memory leak regression fix from Benjamin Tissoires" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: multitouch: prevent memleak with the allocated name
-
- 12 Jun, 2013 14 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: "Outside of bcache (which really isn't super big), these are all few-liners. There are a few important fixes in here: - Fix blk pm sleeping when holding the queue lock - A small collection of bcache fixes that have been done and tested since bcache was included in this merge window. - A fix for a raid5 regression introduced with the bio changes. - Two important fixes for mtip32xx, fixing an oops and potential data corruption (or hang) due to wrong bio iteration on stacked devices." * 'for-linus' of git://git.kernel.dk/linux-block: scatterlist: sg_set_buf() argument must be in linear mapping raid5: Initialize bi_vcnt pktcdvd: silence static checker warning block: remove refs to XD disks from documentation blkpm: avoid sleep when holding queue lock mtip32xx: Correctly handle bio->bi_idx != 0 conditions mtip32xx: Fix NULL pointer dereference during module unload bcache: Fix error handling in init code bcache: clarify free/available/unused space bcache: drop "select CLOSURES" bcache: Fix incompatible pointer type warning
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "Bunch of fixes and one little addition to math64.h" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits) include/linux/math64.h: add div64_ul() mm: memcontrol: fix lockless reclaim hierarchy iterator frontswap: fix incorrect zeroing and allocation size for frontswap_map kernel/audit_tree.c:audit_add_tree_rule(): protect `rule' from kill_rules() mm: migration: add migrate_entry_wait_huge() ocfs2: add missing lockres put in dlm_mig_lockres_handler mm/page_alloc.c: fix watermark check in __zone_watermark_ok() drivers/misc/sgi-gru/grufile.c: fix info leak in gru_get_config_info() aio: fix io_destroy() regression by using call_rcu() rtc-at91rm9200: use shadow IMR on at91sam9x5 rtc-at91rm9200: add shadow interrupt mask rtc-at91rm9200: refactor interrupt-register handling rtc-at91rm9200: add configuration support rtc-at91rm9200: add match-table compile guard fs/ocfs2/namei.c: remove unecessary ERROR when removing non-empty directory swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree cciss: fix broken mutex usage in ioctl audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE drivers/rtc/rtc-cmos.c: fix accidentally enabling rtc channel ...
-
Alex Shi authored
There is div64_long() to handle the s64/long division, but no mocro do u64/ul division. It is necessary in some scenarios, so add this function. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alex Shi <alex.shi@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
The lockless reclaim hierarchy iterator currently has a misplaced barrier that can lead to use-after-free crashes. The reclaim hierarchy iterator consist of a sequence count and a position pointer that are read and written locklessly, with memory barriers enforcing ordering. The write side sets the position pointer first, then updates the sequence count to "publish" the new position. Likewise, the read side must read the sequence count first, then the position. If the sequence count is up to date, it's guaranteed that the position is up to date as well: writer: reader: iter->position = position if iter->sequence == expected: smp_wmb() smp_rmb() iter->sequence = sequence position = iter->position However, the read side barrier is currently misplaced, which can lead to dereferencing stale position pointers that no longer point to valid memory. Fix this. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Glauber Costa <glommer@parallels.com> Cc: <stable@kernel.org> [3.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
The bitmap accessed by bitops must have enough size to hold the required numbers of bits rounded up to a multiple of BITS_PER_LONG. And the bitmap must not be zeroed by memset() if the number of bits cleared is not a multiple of BITS_PER_LONG. This fixes incorrect zeroing and allocation size for frontswap_map. The incorrect zeroing part doesn't cause any problem because frontswap_map is freed just after zeroing. But the wrongly calculated allocation size may cause the problem. For 32bit systems, the allocation size of frontswap_map is about twice as large as required size. For 64bit systems, the allocation size is smaller than requeired if the number of bits is not a multiple of BITS_PER_LONG. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Chen Gang authored
audit_add_tree_rule() must set 'rule->tree = NULL;' firstly, to protect the rule itself freed in kill_rules(). The reason is when it is killed, the 'rule' itself may have already released, we should not access it. one example: we add a rule to an inode, just at the same time the other task is deleting this inode. The work flow for adding a rule: audit_receive() -> (need audit_cmd_mutex lock) audit_receive_skb() -> audit_receive_msg() -> audit_receive_filter() -> audit_add_rule() -> audit_add_tree_rule() -> (need audit_filter_mutex lock) ... unlock audit_filter_mutex get_tree() ... iterate_mounts() -> (iterate all related inodes) tag_mount() -> tag_trunk() -> create_trunk() -> (assume it is 1st rule) fsnotify_add_mark() -> fsnotify_add_inode_mark() -> (add mark to inode->i_fsnotify_marks) ... get_tree(); (each inode will get one) ... lock audit_filter_mutex The work flow for deleting an inode: __destroy_inode() -> fsnotify_inode_delete() -> __fsnotify_inode_delete() -> fsnotify_clear_marks_by_inode() -> (get mark from inode->i_fsnotify_marks) fsnotify_destroy_mark() -> fsnotify_destroy_mark_locked() -> audit_tree_freeing_mark() -> evict_chunk() -> ... tree->goner = 1 ... kill_rules() -> (assume current->audit_context == NULL) call_rcu() -> (rule->tree != NULL) audit_free_rule_rcu() -> audit_free_rule() ... audit_schedule_prune() -> (assume current->audit_context == NULL) kthread_run() -> (need audit_cmd_mutex and audit_filter_mutex lock) prune_one() -> (delete it from prue_list) put_tree(); (match the original get_tree above) Signed-off-by: Chen Gang <gang.chen@asianux.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Naoya Horiguchi authored
When we have a page fault for the address which is backed by a hugepage under migration, the kernel can't wait correctly and do busy looping on hugepage fault until the migration finishes. As a result, users who try to kick hugepage migration (via soft offlining, for example) occasionally experience long delay or soft lockup. This is because pte_offset_map_lock() can't get a correct migration entry or a correct page table lock for hugepage. This patch introduces migration_entry_wait_huge() to solve this. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@vger.kernel.org> [2.6.35+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Xue jiufei authored
dlm_mig_lockres_handler() is missing a dlm_lockres_put() on an error path. Signed-off-by: joyce <xuejiufei@huawei.com> Reviewed-by: shencanquan <shencanquan@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Tomasz Stanislawski authored
The watermark check consists of two sub-checks. The first one is: if (free_pages <= min + lowmem_reserve) return false; The check assures that there is minimal amount of RAM in the zone. If CMA is used then the free_pages is reduced by the number of free pages in CMA prior to the over-mentioned check. if (!(alloc_flags & ALLOC_CMA)) free_pages -= zone_page_state(z, NR_FREE_CMA_PAGES); This prevents the zone from being drained from pages available for non-movable allocations. The second check prevents the zone from getting too fragmented. for (o = 0; o < order; o++) { free_pages -= z->free_area[o].nr_free << o; min >>= 1; if (free_pages <= min) return false; } The field z->free_area[o].nr_free is equal to the number of free pages including free CMA pages. Therefore the CMA pages are subtracted twice. This may cause a false positive fail of __zone_watermark_ok() if the CMA area gets strongly fragmented. In such a case there are many 0-order free pages located in CMA. Those pages are subtracted twice therefore they will quickly drain free_pages during the check against fragmentation. The test fails even though there are many free non-cma pages in the zone. This patch fixes this issue by subtracting CMA pages only for a purpose of (free_pages <= min + lowmem_reserve) check. Laura said: We were observing allocation failures of higher order pages (order 5 = 128K typically) under tight memory conditions resulting in driver failure. The output from the page allocation failure showed plenty of free pages of the appropriate order/type/zone and mostly CMA pages in the lower orders. For full disclosure, we still observed some page allocation failures even after applying the patch but the number was drastically reduced and those failures were attributed to fragmentation/other system issues. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Laura Abbott <lauraa@codeaurora.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mel@csn.ul.ie> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
The "info.fill" array isn't initialized so it can leak uninitialized stack information to user space. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robin Holt <holt@sgi.com> Acked-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
There was a regression introduced by 36f55889 ("aio: refcounting cleanup"), reported by Jens Axboe - the refcounting cleanup switched to using RCU in the shutdown path, but the synchronize_rcu() was done in the context of the io_destroy() syscall greatly increasing the time it could block. This patch switches it to call_rcu() and makes shutdown asynchronous (more asynchronous than it was originally; before the refcount changes io_destroy() would still wait on pending kiocbs). Note that there's a global quota on the max outstanding kiocbs, and that quota must be manipulated synchronously; otherwise io_setup() could return -EAGAIN when there isn't quota available, and userspace won't have any way of waiting until shutdown of the old kioctxs has finished (besides busy looping). So we release our quota before kioctx shutdown has finished, which should be fine since the quota never corresponded to anything real anyways. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Reported-by: Jens Axboe <axboe@kernel.dk> Tested-by: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Tested-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johan Hovold authored
Add support for the at91sam9x5-family which must use the shadow interrupt mask due to a hardware issue (causing RTC_IMR to always be zero). Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johan Hovold authored
Add shadow interrupt-mask register which can be used on SoCs where the actual hardware register is broken. Note that some care needs to be taken to make sure the shadow mask corresponds to the actual hardware state. The added overhead is not an issue for the non-broken SoCs due to the relatively infrequent interrupt-mask updates. We do, however, only use the shadow mask value as a fall-back when it actually needed as there is still a theoretical possibility that the mask is incorrect (see the code for details). Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johan Hovold authored
Add accessors for the interrupt register. This will allow us to easily add a shadow interrupt-mask register to use on SoCs where the interrupt-mask register cannot be used. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Robert Nelson <Robert.Nelson@digikey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-