Skip to content

L
linux
Switch branch/tag
  1. 26 May, 2009 1 commit
    • Eric Sandeen's avatar
      xfs: fix overflow in xfs_growfs_data_private · 09632487
      Eric Sandeen authored 
      In the case where growing a filesystem would leave the last AG
too small, the fixup code has an overflow in the calculation
of the new size with one fewer ag, because "nagcount" is a 32
bit number.  If the new filesystem has > 2^32 blocks in it
this causes a problem resulting in an EINVAL return from growfs:

 # xfs_io -f -c "truncate 19998630180864" fsfile
 # mkfs.xfs -f -bsize=4096 -dagsize=76288719b,size=3905982455b fsfile
 # mount -o loop fsfile /mnt
 # xfs_growfs /mnt

meta-data=/dev/loop0             isize=256    agcount=52,
agsize=76288719 blks
         =                       sectsz=512   attr=2
data     =                       bsize=4096   blocks=3905982455, imaxpct=5
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0
log      =internal               bsize=4096   blocks=32768, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=0
realtime =none                   extsz=4096   blocks=0, rtextents=0
xfs_growfs: XFS_IOC_FSGROWFSDATA xfsctl failed: Invalid argument

Reported-by: richard.ems@cape-horn-eng.com
Signed-off-by: default avatarEric Sandeen <sandeen@sandeen.net>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarFelix Blyakher <felixb@sgi.com>
Signed-off-by: default avatarFelix Blyakher <felixb@sgi.com>
      09632487
  3. 08 May, 2009 1 commit
  5. 29 Apr, 2009 4 commits
  7. 06 Apr, 2009 9 commits
    • Dave Chinner's avatar
      xfs: remove xfs_flush_space · 8de2bf93
      Dave Chinner authored 
      The only thing we need to do now when we get an ENOSPC condition during delayed
allocation reservation is flush all the other inodes with delalloc blocks on
them and retry without EOF preallocation. Remove the unneeded mess that is
xfs_flush_space() and just call xfs_flush_inodes() directly from
xfs_iomap_write_delay().

Also, change the location of the retry label to avoid trying to do EOF
preallocation because we don't want to do that at ENOSPC. This enables us to
remove the BMAPI_SYNC flag as it is no longer used.
Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      8de2bf93
    • Dave Chinner's avatar
      xfs: flush delayed allcoation blocks on ENOSPC in create · 153fec43
      Dave Chinner authored 
      If we are creating lots of small files, we can fail to get
a reservation for inode create earlier than we should due to
EOF preallocation done during delayed allocation reservation.
Hence on the first reservation ENOSPC failure flush all the
delayed allocation blocks out of the system and retry.

This fixes the last commonly triggered spurious ENOSPC issue
that has been reported.
Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      153fec43
    • Dave Chinner's avatar
      xfs: block callers of xfs_flush_inodes() correctly · e43afd72
      Dave Chinner authored 
      xfs_flush_inodes() currently uses a magic timeout to wait for
some inodes to be flushed before returning. This isn't
really reliable but used to be the best that could be done
due to deadlock potential of waiting for the entire flush.

Now the inode flush is safe to execute while we hold page
and inode locks, we can wait for all the inodes to flush
synchronously. Convert the wait mechanism to a completion
to do this efficiently. This should remove all remaining
spurious ENOSPC errors from the delayed allocation reservation
path.

This is extracted almost line for line from a larger patch
from Mikulas Patocka.
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      e43afd72
    • Dave Chinner's avatar
      xfs: make inode flush at ENOSPC synchronous · 5825294e
      Dave Chinner authored 
      When we are writing to a single file and hit ENOSPC, we trigger a background
flush of the inode and try again.  Because we hold page locks and the iolock,
the flush won't proceed until after we release these locks. This occurs once
we've given up and ENOSPC has been reported. Hence if this one is the only
dirty inode in the system, we'll get an ENOSPC prematurely.

To fix this, remove the async flush from the allocation routines and move
it to the top of the write path where we can do a synchronous flush
and retry the write again. Only retry once as a second ENOSPC indicates
that we really are ENOSPC.

This avoids a page cache deadlock when trying to do this flush synchronously
in the allocation layer that was identified by Mikulas Patocka.
Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      5825294e
    • Dave Chinner's avatar
      xfs: use xfs_sync_inodes() for device flushing · a8d770d9
      Dave Chinner authored 
      Currently xfs_device_flush calls sync_blockdev() which is
a no-op for XFS as all it's metadata is held in a different
address to the one sync_blockdev() works on.

Call xfs_sync_inodes() instead to flush all the delayed
allocation blocks out. To do this as efficiently as possible,
do it via two passes - one to do an async flush of all the
dirty blocks and a second to wait for all the IO to complete.
This requires some modification to the xfs-sync_inodes_ag()
flush code to do efficiently.
Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      a8d770d9
    • Dave Chinner's avatar
      xfs: inform the xfsaild of the push target before sleeping · 9d7fef74
      Dave Chinner authored 
      When trying to reserve log space, we find the amount of space
we need, then go to sleep waiting for space. When we are
woken, we try to push the tail of the log forward to make
sure we have space available.

Unfortunately, this means that if there is not space available, and
everyone who needs space goes to sleep there is no-one left to push
the tail of the log to make space available. Once we have a thread
waiting for space to become available, the others queue up behind
it in a FIFO, and none of them push the tail of the log.

This can result in everyone going to sleep in xlog_grant_log_space()
if the first sleeper races with the last I/O that moves the tail
of the log forward. With no further I/O tomove the tail of the log,
there is nothing to wake the sleepers and hence all transactions
just stop.

Fix this by making sure the xfsaild will create enough space for the
transaction that is about to sleep by moving the push target far
enough forwards to ensure that that the curent proceeees will have
enough space available when it is woken. That is, we push the
AIL before we go to sleep.

Because we've inserted the log ticket into the queue before we've
pushed and gone to sleep, subsequent transactions will wait behind
this one. Hence we are guaranteed to have space available when we
are woken.
Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      9d7fef74
    • Dave Chinner's avatar
      xfs: prevent unwritten extent conversion from blocking I/O completion · c626d174
      Dave Chinner authored 
      Unwritten extent conversion can recurse back into the filesystem due
to memory allocation. Memory reclaim requires I/O completions to be
processed to allow the callers to make progress. If the I/O
completion workqueue thread is doing the recursion, then we have a
deadlock situation.

Move unwritten extent completion into it's own workqueue so it
doesn't block I/O completions for normal delayed allocation or
overwrite data.
Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      c626d174
    • Dave Chinner's avatar
      xfs: fix double free of inode · 705db3fd
      Dave Chinner authored 
      If we fail to initialise the VFS inode in inode_init_always(),
it will call ->delete_inode internally resulting in the inode being
freed. Hence we need to delay the call to inode_init_always()
until after the XFS inode is sufficient set up to handle a
call to ->delete_inode, and then if that fails do not touch
the inode again at all as it has been freed.
Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      705db3fd
    • Dave Chinner's avatar
      xfs: validate log feature fields correctly · a6cb767e
      Dave Chinner authored 
      If the large log sector size feature bit is set in the
superblock by accident (say disk corruption), the then
fields that are now considered valid are not checked on
production kernels. The checks are present as ASSERT
statements so cause a panic on a debug kernel.

Change this so that the fields are validity checked if
the feature bit is set and abort the log mount if the
fields do not contain valid values.
Reported-by: default avatarEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      a6cb767e
  9. 31 Mar, 2009 9 commits
  11. 30 Mar, 2009 16 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7