- 06 Jun, 2019 3 commits
-
-
Pierre-Louis Bossart authored
The platform override code uses devm_ functions to allocate memory for the new name but the card device is not initialized. Fix by moving the init earlier. Fixes: 4506db80 ("ASoC: Intel: cht_bsw_nau8824: platform name fixup support") Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
The platform override code uses devm_ functions to allocate memory for the new name but the card device is not initialized. Fix by moving the init earlier. Fixes: e4bc6b11 ("ASoC: Intel: bytcht_es8316: platform name fixup support") Signed-off-by:
-
Pierre-Louis Bossart authored
The platform override code uses devm_ functions to allocate memory for the new name but the card device is not initialized. Fix by moving the init earlier. Fixes: 7e7e24d7 ("ASoC: Intel: cht_bsw_max98090_ti: platform name fixup support") Signed-off-by:
-
- 04 Jun, 2019 5 commits
-
-
Marcus Cooper authored
Whilst testing the capture functionality of the i2s on the newer SoCs it was noticed that the recording was somewhat distorted. This was due to the offset not being set correctly on the receiver side. Signed-off-by:
Marcus Cooper <codekipper@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Marcus Cooper authored
Although not causing any noticeable issues, the mask for the channel offset is covering too many bits. Signed-off-by:
-
Yu-Hsuan Hsu authored
The supported formats are S16_LE and S24_LE now. However, by datasheet of max98090, S24_LE is only supported when it is in the right justified mode. We should remove 24-bit format if it is not in that mode to avoid triggering error. Signed-off-by:
Yu-Hsuan Hsu <yuhsuan@chromium.org> Signed-off-by:
-
YueHaibing authored
Fix gcc build error while CONFIG_I2C is not set sound/soc/codecs/da7219.c:2640:1: warning: data definition has no type or storage class module_i2c_driver(da7219_i2c_driver); ^~~~~~~~~~~~~~~~~ sound/soc/codecs/da7219.c:2640:1: error: type defaults to int in declaration of module_i2c_driver [-Werror=implicit-int] sound/soc/codecs/da7219.c:2640:1: warning: parameter names (without types) in function declaration sound/soc/codecs/da7219.c:2629:26: warning: da7219_i2c_driver defined but not used [-Wunused-variable] Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 6d817c0e ("ASoC: codecs: Add da7219 codec driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
while building without PCI: sound/soc/sof/intel/hda.o: In function `hda_dsp_probe': hda.c:(.text+0x79c): undefined reference to `pci_ioremap_bar' hda.c:(.text+0x79c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `pci_ioremap_bar' hda.c:(.text+0x7c4): undefined reference to `pci_ioremap_bar' hda.c:(.text+0x7c4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `pci_ioremap_bar' Reported-by:
-
- 03 Jun, 2019 7 commits
-
-
Kai Vehmanen authored
The definitions for DSP oops structures were not aligned correctly to current FW ABI version 3.6.0, leading to invalid data being printed out to debug logs. Fix the structs and update related platform code accordingly. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Ranjani Sridharan authored
HDA_DEV_ASOC type codec device refcounts are managed differently from HDA_DEV_LEGACY devices. The refcount is released explicitly in snd_hdac_ext_bus_device_remove() for ASOC type devices. So, remove the put_device() call in snd_hda_codec_dev_free() for such devices to make the refcount balanced. This will prevent the NULL pointer exception when the codec driver is released after the card is freed. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Slawomir Blauciak authored
Previously the structure used bitfields, which do not guarantee bit ordering. This change makes sure the order is clearly defined. It also renames and repurposes the field for general use. Signed-off-by:
Slawomir Blauciak <slawomir.blauciak@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
We had a couple of misses with ABI changes, e.g. for Xtensa oops information and the integration of sound trigger, before we set-up a formal process to track evolutions. With this patch, the SOF kernel patches are officially aligned with the firmware 3.6 level. Changing this level has no impact on existing users and is fully backwards-compatible. Signed-off-by:
-
Pan Xiuli authored
Add soundwire dai type and update ABI version. Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
We missed these two definitions for GDB support and component notifications, they are defined for the SOF firmware. Since they are not used by the kernel so far, we can still add them without any ABI change. Signed-off-by:
-
Kovács Tamás authored
This tablet has an incorrect acpi identifier just like Thinkpad10 tablet, which is why it is trying to load the RT5640 driver instead of the RT5762 driver. The RT5640 driver, on the other hand, checks the hardware ID, so no driver are loaded during boot. This fix resolves to load the RT5672 driver on this tablet during boot. It also provides the correct IO configuration, like the jack detect mode 3, for 1.8V pullup. I would like to thank Pierre-Louis Bossart for helping with this patch. Signed-off-by:
Kovács Tamás <kepszlok@zohomail.eu> Signed-off-by:
-
- 29 May, 2019 1 commit
-
-
Georgii Staroselskii authored
Allwinner DAC seems to have a delay in the Speaker audio routing. When playing a sound for the first time, the sound gets chopped. On a second play the sound is played correctly. After some time (~5s) the issue gets back. This commit seems to be fixing the same issue as bf14da7e but for another codepath. This is the DTS that was used to debug the problem. &codec { allwinner,pa-gpios = <&r_pio 0 11 GPIO_ACTIVE_HIGH>; /* PL11 */ allwinner,audio-routing = "Speaker", "LINEOUT"; status = "okay"; } Signed-off-by:
Georgii Staroselskii <georgii.staroselskii@emlid.com> Reviewed-by:
-
- 28 May, 2019 9 commits
-
-
Zhu Yingjiang authored
re-write hda_init_caps and remove the HDA reset, clean HDA streams and clear interrupt steps in hda_dsp_probe so the HDA init steps will not be called twice if the CONFIG_SND_SOC_SOF_HDA is true. Fixes: 8a300c8f ("ASoC: SOF: Intel: Add HDA controller for Intel DSP") Reviewed-by:
Zhu Yingjiang <yingjiang.zhu@linux.intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Currently on all supported platforms the IPC IRQ thread first signals the sender when an IPC response is received from the DSP, then unmasks the IPC interrupt. Those actions are performed without holding any locks, so the thread can be interrupted between them. IPC timeouts have been observed in such scenarios: if the sender is woken up and it proceeds with sending the next message without unmasking the IPC interrupt, it can miss the next response. This patch takes a spin-lock to prevent the IRQ thread from being preempted at that point. It also makes sure, that the next IPC transmission by the host cannot take place before the IRQ thread has finished updating all the required IPC registers. Fixes: 53e0c72d ("ASoC: SOF: Add support for IPC IO between DSP and Host") Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
-
Keyon Jie authored
The size for the bytes kcontrol should include the abi header, that is, data->size + sizeof(*data), it is also aligned with get method after this change. Fixes: c3078f53 ("ASoC: SOF: Add Sound Open Firmware KControl support") Reviewed-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
If the SOF hw_params() fail, typically with an IPC error thrown by the firmware, the period_elapsed workqueue is not initialized, but we still cancel it in hw_free(), which results in a kernel warning. Move the initialization to the .open callback. Tested on Broadwell (Samus) and IceLake. Fixes: e2803e61 ("ASoC: SOF: PCM: add period_elapsed work to fix race condition in interrupt context") GitHub issue: https://github.com/thesofproject/linux/issues/932Reviewed-by:
-
Libin Yang authored
sof_pcm_hw_params() can only be called once to setup the FW hw_params. So after calling sof_pcm_hw_params(), hw_params_upon_resume flag must be cleared to avoid multiple invoking sof_pcm_hw_params() by prepare. For example, after resume, there is an xrun happened, prepare() will be called. As the hw_params_upon_resume flag is not cleared, sof_pcm_hw_params() will be called and this will cause IPC timeout. This patch fixes such issues. Fixes: 868bd00f ("ASoC: SOF: Add PCM operations support") Reviewed-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
In some configurations, it's a requirement to split the probe in two, with a second part handled in a workqueue (e.g. for HDMI support which depends on the DRM modules). SOF already handles these configurations but the error flow is incorrect. When an error occurs in the workqueue, the probe has technically already completed. If we release the resources on errors, this generates kernel oops/use-after-free when the resources are released a second time on module removal. GitHub issue: https://github.com/thesofproject/linux/issues/945 Fixes: c16211d6 ("ASoC: SOF: Add Sound Open Firmware driver core") Reviewed-by:
-
Ranjani Sridharan authored
No need to call snd_soc_unregister_component in case of error because the component device is resource-managed. Fixes: c16211d6 ("ASoC: SOF: Add Sound Open Firmware driver core") Reviewed-by:
-
Ranjani Sridharan authored
snd_sof_remove() disables the DSP and unmaps the DSP BAR. Removing topology after disabling the DSP results in a kernel panic while unloading the pipeline widget. This is because pipeline widget unload attempts to power down the core it is scheduled on by accessing the DSP registers. So, the suggested fix here is to unregister the machine driver first to remove the topology and then disable the DSP to avoid the situation described above. Note that the kernel panic only happens in cases where the HDaudio link is not managed by the hdac library, e.g. no codec or when HDMI is not supported. When the hdac library is used, snd_sof_remove() calls snd_hdac_ext_bus_device_remove() to remove the codec which unregisters the component driver thereby also removing the topology before the DSP is disabled. Fixes: c16211d6 ("ASoC: SOF: Add Sound Open Firmware driver core") Reviewed-by:
-
Kuninori Morimoto authored
commit 53e947a0 ("ASoC: soc-core: merge card resources cleanup method") merged cleanup method of snd_soc_instantiate_card() and soc_cleanup_card_resources(). But, after this commit, if user uses unbind/bind to Component factor drivers, Kernel might indicates refcount error at soc_cleanup_card_resources(). The 1st reason is card->snd_card is still exist even though snd_card_free() was called, but it is already cleaned. We need to set NULL to it. 2nd is card->dapm and card create debugfs, but its dentry is still exist even though it was removed. We need to set NULL to it. Fixes: 53e947a0 ("ASoC: soc-core: merge card resources cleanup method") Cc: stable@vger.kernel.org # for v5.1 Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
- 24 May, 2019 2 commits
-
-
Ranjani Sridharan authored
Removing link components results in topology unloading. So, acquire the client_mutex before removing components in soc_remove_link_components. This will prevent the lockdep warning seen when dai links are removed during topology removal. Signed-off-by:
-
Jon Hunter authored
Revert commit 069d037a ("ASoC: simple-card: Fix configuration of DAI format"). During further review, it turns out that the actual issue was caused by an incorrectly formatted device-tree node describing the soundcard. The following is incorrect because the simple-audio-card 'bitclock-master' and 'frame-master' properties should not reference the actual codec phandle ... sound { compatible = "simple-audio-card"; ... => simple-audio-card,bitclock-master = <&codec>; => simple-audio-card,frame-master = <&codec>; ... simple-audio-card,cpu { sound-dai = <&xxx>; }; simple-audio-card,codec { => sound-dai = <&codec>; }; }; Rather, these properties should reference the phandle to the 'simple-audio-card,codec' property as shown below ... sound { compatible = "simple-audio-card"; ... => simple-audio-card,bitclock-master = <&codec>; => simple-audio-card,frame-master = <&codec>; ... simple-audio-card,cpu { sound-dai = <&xxx>; }; => codec: simple-audio-card,codec { /* simple-card wants here */ sound-dai = <&xxx>; /* not here */ }; }; Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
- 21 May, 2019 2 commits
-
-
Sathya Prakash M R authored
The use of BIT/GENMASK was incorrect, fix. Signed-off-by:
Sathya Prakash M R <sathya.prakash.m.r@intel.com> Signed-off-by:
-
Sathya Prakash M R authored
The RT5682 codec button mapping, initially copied from the DA7219 one, needs to be corrected. Signed-off-by:
-
- 20 May, 2019 4 commits
-
-
Jon Hunter authored
When configuring a codec to be both bit-clock and frame-master, it was found that the codec was always configured as bit-clock and frame-slave. Looking at the simple_dai_link_of() function there appears to be two problems with the configuration of the DAI format, which are ... 1. The function asoc_simple_parse_daifmt() is called before the function asoc_simple_parse_codec() and this means that the device-tree node for the codec has not been parsed yet, which is needed by the function asoc_simple_parse_daifmt() to determine who is the codec. 2. The phandle passed to asoc_simple_parse_daifmt() is the phandle to the 'codec' node and not the phandle of the actual codec defined by the 'sound-dai' property under the 'codec' node. Fix the above by moving the call to asoc_simple_parse_daifmt() after the the call to asoc_simple_parse_codec() and pass the phandle for the codec to asoc_simple_parse_daifmt(). Signed-off-by:
-
Sathya Prakash M R authored
The selection order of m/c in match table is corrected to use common codec as last in the list. Signed-off-by:
-
Curtis Malainey authored
There is a case when a we want to read a large number of bytes that require a burst but is not a multiple of the word size (8). When this happens rt5677_spi_reverse will run off the end of the buffer. The solution is to tell spi_reverse the actual size of the destination and stop if we reach it even if we have data left that we read. Cc: Ben Zhang <benzh@chromium.org> Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
Kuninori Morimoto authored
snd_soc_dai_link_event() is updating snd_soc_dai :: active, but it is unbalance. It counts up if it has startup callback. case SND_SOC_DAPM_PRE_PMU: ... snd_soc_dapm_widget_for_each_source_path(w, path) { ... if (source->driver->ops->startup) { ... => source->active++; } ... } ... But, always counts down case SND_SOC_DAPM_PRE_PMD: ... snd_soc_dapm_widget_for_each_source_path(w, path) { ... => source->active--; ... } This patch always counts up when SND_SOC_DAPM_PRE_PMD. Signed-off-by:Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
- 17 May, 2019 1 commit
-
-
S.j. Wang authored
Add regcache_mark_dirty before regcache_sync for power of codec may be lost at suspend, then all the register need to be reconfigured. Fixes: 0c516b4f ("ASoC: cs42xx8: Add codec driver support for CS42448/CS42888") Cc: <stable@vger.kernel.org> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by:
-
- 16 May, 2019 1 commit
-
-
S.j. Wang authored
When the output sample rate is [8kHz, 30kHz], the limitation of the supported ratio range is [1/24, 8]. In the driver we use (8kHz, 30kHz) instead of [8kHz, 30kHz]. So this patch is to fix this issue and the potential rounding issue with divider. Fixes: fff6e03c ("ASoC: fsl_asrc: add support for 8-30kHz output sample rate") Cc: <stable@vger.kernel.org> Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
- 13 May, 2019 5 commits
-
-
Viorel Suman authored
snd_soc_component_update_bits() may return 1 if operation was successful and the value of the register changed. Return a non-zero in ak4458_rstn_control for an error only. Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
Libin Yang authored
If playback/capture is paused and system enters S3, after system returns from suspend, BE dai needs to call prepare() callback when playback/capture is released from pause if RESUME_INFO flag is not set. Currently, the dpcm_be_dai_prepare() function will block calling prepare() if the pcm is in SND_SOC_DPCM_STATE_PAUSED state. This will cause the following test case fail if the pcm uses BE: playback -> pause -> S3 suspend -> S3 resume -> pause release The playback may exit abnormally when pause is released because the BE dai prepare() is not called. This patch allows dpcm_be_dai_prepare() to call dai prepare() callback in SND_SOC_DPCM_STATE_PAUSED state. Signed-off-by:
-
Viorel Suman authored
AK4458 is probed successfully even if AK4458 is not present - this is caused by probe function returning no error on i2c access failure. Return an error on probe if i2c access has failed. Signed-off-by:
-
Matt Flax authored
The cs4265_readable_register function stopped short of the maximum register. An example bug is taken from : https://github.com/Audio-Injector/Ultra/issues/25 Where alsactl store fails with : Cannot read control '2,0,0,C Data Buffer,0': Input/output error This patch fixes the bug by setting the cs4265 to have readable registers up to the maximum hardware register CS4265_MAX_REGISTER. Signed-off-by:
Matt Flax <flatmax@flatmax.org> Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Ranjani Sridharan authored
Remove the erroneous addition of "SET_VALUE" to the GLB IPC command string. Signed-off-by:
-
