- 16 May, 2013 4 commits
-
-
Thomas Gleixner authored
Add a module refcount, so the current clocksource cannot be removed unconditionally. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130425143435.762417789@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
timekeeping_notify() can fail due cs->enable() failure. Though the caller does not notice and happily keeps the wrong clocksource as the current one. Let the caller know about failure, so the current clocksource will be shown correctly in sysfs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130425143435.696321912@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
If a clocksource has a (wrong) high rating, but can't be used as a timebase for oneshot tick mode, it is unconditionally selected even when the system is already in oneshot tick mode. This causes full system failure. Verify the clocksource selection against the oneshot mode. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130425143435.635040849@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Link: http://lkml.kernel.org/r/20130425143435.558006195@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
- 15 May, 2013 11 commits
-
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "This includes a fix to a memory leak when adding filters to traces. Also, Masami Hiramatsu fixed up some minor bugs that were discovered by sparse." * tag 'trace-fixes-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Make print_*probe_event static tracing/kprobes: Fix a sparse warning for incorrect type in assignment tracing/kprobes: Use rcu_dereference_raw for tp->files tracing: Fix leaks of filter preds
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - Fix for a CPU hot-add deadlock in microcode update code - Fix for idle consolidation fallout - Documentation update for initial kernel direct mapping * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Add missing comments for initial kernel direct mapping x86/microcode: Add local mutex to fix physical CPU hot-add deadlock x86: Fix idle consolidation fallout
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: - Fix for a task exit cleanup race caused by a missing a preempt disable - Cleanup of the event notification functions with a massive reduction of duplicated code * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Factor out auxiliary events notification perf: Fix EXIT event notification
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: - Cure for not using zalloc in the first place, which leads to random crashes with CPUMASK_OFF_STACK. - Revert a user space visible change which broke udev - Add a missing cpu_online early return introduced by the new full dyntick conversions - Plug a long standing race in the timer wheel cpu hotplug code. Sigh... - Cleanup NOHZ per cpu data on cpu down to prevent stale data on cpu up. * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE tick: Don't invoke tick_nohz_stop_sched_tick() if the cpu is offline tick: Cleanup NOHZ per cpu data on cpu down tick: Use zalloc_cpumask_var for allocating offstack cpumasks
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Thomas Gleixner: - Two fixlets for the fallout of the generic idle task conversion - Documentation update * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu/idle: Wrap cpu-idle poll mode within rcu_idle_enter/exit idle: Fix hlt/nohlt command-line handling in new generic idle kthread: Document ways of reducing OS jitter due to per-CPU kthreads
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A small number of fixes for stuff from the last merge window, and in one case (IRQ time accounting) the previous merge window." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4 ARM: finally enable IRQ time accounting config
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Sage Weil: "Yes, this is a much larger pull than I would like after -rc1. There are a few things included: - a few fixes for leaks and incorrect assertions - a few patches fixing behavior when mapped images are resized - handling for cloned/layered images that are flattened out from underneath the client The last bit was non-trivial, and there is some code movement and associated cleanup mixed in. This was ready and was meant to go in last week but I missed the boat on Friday. My only excuse is that I was waiting for an all clear from the testing and there were many other shiny things to distract me. Strictly speaking, handling the flatten case isn't a regression and could wait, so if you like we can try to pull the series apart, but Alex and I would much prefer to have it all in as it is a case real users will hit with 3.10." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (33 commits) rbd: re-submit flattened write request (part 2) rbd: re-submit write request for flattened clone rbd: re-submit read request for flattened clone rbd: detect when clone image is flattened rbd: reference count parent requests rbd: define parent image request routines rbd: define rbd_dev_unparent() rbd: don't release write request until necessary rbd: get parent info on refresh rbd: ignore zero-overlap parent rbd: support reading parent page data for writes rbd: fix parent request size assumption libceph: init sent and completed when starting rbd: kill rbd_img_request_get() rbd: only set up watch for mapped images rbd: set mapping read-only flag in rbd_add() rbd: support reading parent page data rbd: fix an incorrect assertion condition rbd: define rbd_dev_v2_header_info() rbd: get rid of trivial v1 header wrappers ...
-
Masami Hiramatsu authored
According to sparse warning, print_*probe_event static because those functions are not directly called from outside. Link: http://lkml.kernel.org/r/20130513115839.6545.83067.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Masami Hiramatsu authored
Fix a sparse warning about the rcu operated pointer is defined without __rcu address space. Link: http://lkml.kernel.org/r/20130513115837.6545.23322.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Masami Hiramatsu authored
Use rcu_dereference_raw() for accessing tp->files. Because the write-side uses rcu_assign_pointer() for memory barrier, the read-side also has to use rcu_dereference_raw() with read memory barrier. Link: http://lkml.kernel.org/r/20130513115834.6545.17022.stgit@mhiramat-M0-7522 Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt (Red Hat) authored
Special preds are created when folding a series of preds that can be done in serial. These are allocated in an ops field of the pred structure. But they were never freed, causing memory leaks. This was discovered using the kmemleak checker: unreferenced object 0xffff8800797fd5e0 (size 32): comm "swapper/0", pid 1, jiffies 4294690605 (age 104.608s) hex dump (first 32 bytes): 00 00 01 00 03 00 05 00 07 00 09 00 0b 00 0d 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814b52af>] kmemleak_alloc+0x73/0x98 [<ffffffff8111ff84>] kmemleak_alloc_recursive.constprop.42+0x16/0x18 [<ffffffff81120e68>] __kmalloc+0xd7/0x125 [<ffffffff810d47eb>] kcalloc.constprop.24+0x2d/0x2f [<ffffffff810d4896>] fold_pred_tree_cb+0xa9/0xf4 [<ffffffff810d3781>] walk_pred_tree+0x47/0xcc [<ffffffff810d5030>] replace_preds.isra.20+0x6f8/0x72f [<ffffffff810d50b5>] create_filter+0x4e/0x8b [<ffffffff81b1c30d>] ftrace_test_event_filter+0x5a/0x155 [<ffffffff8100028d>] do_one_initcall+0xa0/0x137 [<ffffffff81afbedf>] kernel_init_freeable+0x14d/0x1dc [<ffffffff814b24b7>] kernel_init+0xe/0xdb [<ffffffff814d539c>] ret_from_fork+0x7c/0xb0 [<ffffffffffffffff>] 0xffffffffffffffff Cc: Tom Zanussi <tzanussi@gmail.com> Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
- 14 May, 2013 25 commits
-
-
John Stultz authored
Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config, which enables some minor compile time optimization to avoid uncessary code in mostly the suspend/resume path could cause problems for userland. In particular, the dependency for RTC_HCTOSYS on !ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time twice and simplifies suspend/resume, has the side effect of causing the /sys/class/rtc/rtcN/hctosys flag to always be zero, and this flag is commonly used by udev to setup the /dev/rtc symlink to /dev/rtcN, which can cause pain for older applications. While the udev rules could use some work to be less fragile, breaking userland should strongly be avoided. Additionally the compile time optimizations are fairly minor, and the code being optimized is likely to be reworked in the future, so lets revert this change. Reported-by: Kay Sievers <kay@vrfy.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: stable <stable@vger.kernel.org> #3.9 Cc: Feng Tang <feng.tang@intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Link: http://lkml.kernel.org/r/1366828376-18124-1-git-send-email-john.stultz@linaro.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 update from Ted Ts'o: "Fixed regressions (two stability regressions and a performance regression) introduced during the 3.10-rc1 merge window. Also included is a bug fix relating to allocating blocks after resizing an ext3 file system when using the ext4 file system driver" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd,jbd2: fix oops in jbd2_journal_put_journal_head() ext4: revert "ext4: use io_end for multiple bios" ext4: limit group search loop for non-extent files ext4: fix fio regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fix from Tejun Heo: "A fix for a workqueue_congested() regression that broke fscache" * 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: workqueue_congested() shouldn't translate WORK_CPU_UNBOUND into node number
-
Tirupathi Reddy authored
An inactive timer's base can refer to a offline cpu's base. In the current code, cpu_base's lock is blindly reinitialized each time a CPU is brought up. If a CPU is brought online during the period that another thread is trying to modify an inactive timer on that CPU with holding its timer base lock, then the lock will be reinitialized under its feet. This leads to following SPIN_BUG(). <0> BUG: spinlock already unlocked on CPU#3, kworker/u:3/1466 <0> lock: 0xe3ebe000, .magic: dead4ead, .owner: kworker/u:3/1466, .owner_cpu: 1 <4> [<c0013dc4>] (unwind_backtrace+0x0/0x11c) from [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) <4> [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) from [<c076c160>] (_raw_spin_unlock+0x8/0x30) <4> [<c076c160>] (_raw_spin_unlock+0x8/0x30) from [<c009b858>] (mod_timer+0x294/0x310) <4> [<c009b858>] (mod_timer+0x294/0x310) from [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) <4> [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) from [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) <4> [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) from [<c04d8780>] (sdhci_disable+0x40/0x48) <4> [<c04d8780>] (sdhci_disable+0x40/0x48) from [<c04bf300>] (mmc_release_host+0x4c/0xb0) <4> [<c04bf300>] (mmc_release_host+0x4c/0xb0) from [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) <4> [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) from [<c04c2504>] (mmc_rescan+0x7c/0x2c4) <4> [<c04c2504>] (mmc_rescan+0x7c/0x2c4) from [<c00a6a7c>] (process_one_work+0x27c/0x484) <4> [<c00a6a7c>] (process_one_work+0x27c/0x484) from [<c00a6e94>] (worker_thread+0x210/0x3b0) <4> [<c00a6e94>] (worker_thread+0x210/0x3b0) from [<c00aad9c>] (kthread+0x80/0x8c) <4> [<c00aad9c>] (kthread+0x80/0x8c) from [<c000ea80>] (kernel_thread_exit+0x0/0x8) As an example, this particular crash occurred when CPU #3 is executing mod_timer() on an inactive timer whose base is refered to offlined CPU #2. The code locked the timer_base corresponding to CPU #2. Before it could proceed, CPU #2 came online and reinitialized the spinlock corresponding to its base. Thus now CPU #3 held a lock which was reinitialized. When CPU #3 finally ended up unlocking the old cpu_base corresponding to CPU #2, we hit the above SPIN_BUG(). CPU #0 CPU #3 CPU #2 ------ ------- ------- ..... ...... <Offline> mod_timer() lock_timer_base spin_lock_irqsave(&base->lock) cpu_up(2) ..... ...... init_timers_cpu() .... ..... spin_lock_init(&base->lock) ..... spin_unlock_irqrestore(&base->lock) ...... <spin_bug> Allocation of per_cpu timer vector bases is done only once under "tvec_base_done[]" check. In the current code, spinlock_initialization of base->lock isn't under this check. When a CPU is up each time the base lock is reinitialized. Move base spinlock initialization under the check. Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1368520142-4136-1-git-send-email-tirupath@codeaurora.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Srivatsa S. Bhat authored
Bjørn Mork reported the following warning when running powertop. [ 49.289034] ------------[ cut here ]------------ [ 49.289055] WARNING: at kernel/rcutree.c:502 rcu_eqs_exit_common.isra.48+0x3d/0x125() [ 49.289244] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-bisect-rcu-warn+ #107 [ 49.289251] ffffffff8157d8c8 ffffffff81801e28 ffffffff8137e4e3 ffffffff81801e68 [ 49.289260] ffffffff8103094f ffffffff81801e68 0000000000000000 ffff88023afcd9b0 [ 49.289268] 0000000000000000 0140000000000000 ffff88023bee7700 ffffffff81801e78 [ 49.289276] Call Trace: [ 49.289285] [<ffffffff8137e4e3>] dump_stack+0x19/0x1b [ 49.289293] [<ffffffff8103094f>] warn_slowpath_common+0x62/0x7b [ 49.289300] [<ffffffff8103097d>] warn_slowpath_null+0x15/0x17 [ 49.289306] [<ffffffff810a9006>] rcu_eqs_exit_common.isra.48+0x3d/0x125 [ 49.289314] [<ffffffff81079b49>] ? trace_hardirqs_off_caller+0x37/0xa6 [ 49.289320] [<ffffffff810a9692>] rcu_idle_exit+0x85/0xa8 [ 49.289327] [<ffffffff8107076e>] trace_cpu_idle_rcuidle+0xae/0xff [ 49.289334] [<ffffffff810708b1>] cpu_startup_entry+0x72/0x115 [ 49.289341] [<ffffffff813689e5>] rest_init+0x149/0x150 [ 49.289347] [<ffffffff8136889c>] ? csum_partial_copy_generic+0x16c/0x16c [ 49.289355] [<ffffffff81a82d34>] start_kernel+0x3f0/0x3fd [ 49.289362] [<ffffffff81a8274c>] ? repair_env_string+0x5a/0x5a [ 49.289368] [<ffffffff81a82481>] x86_64_start_reservations+0x2a/0x2c [ 49.289375] [<ffffffff81a82550>] x86_64_start_kernel+0xcd/0xd1 [ 49.289379] ---[ end trace 07a1cc95e29e9036 ]--- The warning is that 'rdtp->dynticks' has an unexpected value, which roughly translates to - the calls to rcu_idle_enter() and rcu_idle_exit() were not made in the correct order, or otherwise messed up. And Bjørn's painstaking debugging indicated that this happens when the idle loop enters the poll mode. Looking at the poll function cpu_idle_poll(), and the implementation of trace_cpu_idle_rcuidle(), the problem becomes very clear: cpu_idle_poll() lacks calls to rcu_idle_enter/exit(), and trace_cpu_idle_rcuidle() calls them in the reverse order - first rcu_idle_exit(), and then rcu_idle_enter(). Hence the even/odd alternative sequencing of rdtp->dynticks goes for a toss. And powertop readily triggers this because powertop uses the idle-tracing infrastructure extensively. So, to fix this, wrap the code in cpu_idle_poll() within rcu_idle_enter/exit(), so that it blends properly with the calls inside trace_cpu_idle_rcuidle() and thus get the function ordering right. Reported-and-tested-by: Bjørn Mork <bjorn@mork.no> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/519169BF.4080208@linux.vnet.ibm.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
commit 5b39939a (nohz: Move ts->idle_calls incrementation into strict idle logic) moved code out of tick_nohz_stop_sched_tick() and missed to bail out when the cpu is offline. That's causing subsequent failures as an offline CPU is supposed to die and not to fiddle with nohz magic. Return false in can_stop_idle_tick() if the cpu is offline. Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz> Reported-and-tested-by: Prarit Bhargava <prarit@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305132138160.2863@ionosSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Benjamin Herrenschmidt: "This is mostly bug fixes (some of them regressions, some of them I deemed worth merging now) along with some patches from Li Zhong hooking up the new context tracking stuff (for the new full NO_HZ)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits) powerpc: Set show_unhandled_signals to 1 by default powerpc/perf: Fix setting of "to" addresses for BHRB powerpc/pmu: Fix order of interpreting BHRB target entries powerpc/perf: Move BHRB code into CONFIG_PPC64 region powerpc: select HAVE_CONTEXT_TRACKING for pSeries powerpc: Use the new schedule_user API on userspace preemption powerpc: Exit user context on notify resume powerpc: Exception hooks for context tracking subsystem powerpc: Syscall hooks for context tracking subsystem powerpc/booke64: Fix kernel hangs at kernel_dbg_exc powerpc: Fix irq_set_affinity() return values powerpc: Provide __bswapdi2 powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3 powerpc/powernv: Detect OPAL v3 API version powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS powerpc: Bring all threads online prior to migration/hibernation powerpc/rtas_flash: Fix validate_flash buffer overflow issue powerpc/kexec: Fix kexec when using VMX optimised memcpy powerpc: Fix build errors STRICT_MM_TYPECHECKS ...
-
Benjamin Herrenschmidt authored
Just like other architectures Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
Currently we only set the "to" address in the branch stack when the CPU explicitly gives us a value. Unfortunately it only does this for XL form branches (eg blr, bctr, bctar) and not I and B form branches (eg b, bc). Fortunately if we read the instruction from memory we can extract the offset of a branch and calculate the target address. This adds a function power_pmu_bhrb_to() to calculate the target/to address of the corresponding I and B form branches. It handles branches in both user and kernel spaces. It also plumbs this into the perf brhb reading code. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
The current Branch History Rolling Buffer (BHRB) code misinterprets the order of entries in the hardware buffer. It assumes that a branch target address will be read _after_ its corresponding branch. In reality the branch target comes before (lower mfbhrb entry) it's corresponding branch. This is a rewrite of the code to take this into account. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
The new Branch History Rolling buffer (BHRB) code is only useful on 64bit processors, so move it into the #ifdef CONFIG_PPC64 region. This avoids code bloat on 32bit systems. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Li Zhong authored
Start context tracking support from pSeries. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Li Zhong authored
This patch corresponds to [PATCH] x86: Use the new schedule_user API on userspace preemption commit 0430499cSigned-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Li Zhong authored
This patch allows RCU usage in do_notify_resume, e.g. signal handling. It corresponds to [PATCH] x86: Exit RCU extended QS on notify resume commit edf55fdaSigned-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Li Zhong authored
This is the exception hooks for context tracking subsystem, including data access, program check, single step, instruction breakpoint, machine check, alignment, fp unavailable, altivec assist, unknown exception, whose handlers might use RCU. This patch corresponds to [PATCH] x86: Exception hooks for userspace RCU extended QS commit 6ba3c97a But after the exception handling moved to generic code, and some changes in following two commits: 56dd9470 context_tracking: Move exception handling to generic code 6c1e0256 context_tracking: Restore correct previous context state on exception exit it is able for exception hooks to use the generic code above instead of a redundant arch implementation. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Li Zhong authored
This is the syscall slow path hooks for context tracking subsystem, corresponding to [PATCH] x86: Syscall hooks for userspace RCU extended QS commit bf5a3c13 TIF_MEMDIE is moved to the second 16-bits (with value 17), as it seems there is no asm code using it. TIF_NOHZ is added to _TIF_SYCALL_T_OR_A, so it is better for it to be in the same 16 bits with others in the group, so in the asm code, andi. with this group could work. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Scott Wood authored
MSR_DE is not cleared on entry to the kernel, and we don't clear it explicitly outside of debug code. If we have MSR_DE set in prime_debug_regs(), and the new thread has events enabled in DBCR0 (e.g. ICMP is set in thread->dbsr0, even though it was cleared in the real DBCR0 when the thread got scheduled out), we'll end up taking a debug exception in the kernel when DBCR0 is loaded. DSRR0 will not point to an exception vector, and the kernel ends up hanging at kernel_dbg_exc. Fix this by always clearing MSR_DE when we load new debug state. Another observed source of kernel_dbg_exc hangs is with the branch taken event. If this event is active, but we take a non-debug trap (e.g. a TLB miss or an asynchronous interrupt) before the next branch. We end up taking a branch-taken debug exception on the initial branch instruction of the exception vector, but because the debug exception is DBSR_BT rather than DBSR_IC we branch to kernel_dbg_exc before even checking the DSRR0 address. Fix this by checking for DBSR_BT as well as DBSR_IC, which is what 32-bit does and what the comments suggest was intended in the 64-bit code as well. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Alexander Gordeev authored
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
David Woodhouse authored
Some versions of GCC apparently expect this to be provided by libgcc. Updates from Mikey to fix 32 bit version and adding "r" to registers. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
The current code fails to handle kexec on OPALv2. This fixes it and adds code to improve the situation on OPALv3 where we can query the CPU status from the firmware and decide what to do based on that. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Future firmwares will support that new version Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Li Zhong authored
Saw this warning again, and this time from the ret_from_fork path. It seems we could clear the back chain earlier in copy_thread(), which could cover both path, and also fix potential lockdep usage in schedule_tail(), or exception occurred before we clear the back chain. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
We are getting build errors with CONFIG_PROC_FS=n: arch/powerpc/kernel/rtas_flash.c In function 'rtas_flash_init': 745:33: error: unused variable 'f' [-Werror=unused-variable] But rtas_flash.c should not be built when CONFIG_PROC_FS=n, beacause all it does is provide a /proc interface to the RTAS flash routines. CONFIG_RTAS_FLASH already depends on CONFIG_RTAS_PROC, to indicate that it depends on the RTAS proc support, but CONFIG_RTAS_PROC does not depend on CONFIG_PROC_FS. So fix that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Robert Jennings authored
This patch brings online all threads which are present but not online prior to migration/hibernation. After migration/hibernation those threads are taken back offline. During migration/hibernation all online CPUs must call H_JOIN, this is required by the hypervisor. Without this patch, threads that are offline (H_CEDE'd) will not be woken to make the H_JOIN call and the OS will be deadlocked (all threads either JOIN'd or CEDE'd). Cc: <stable@kernel.org> Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Vasant Hegde authored
ibm,validate-flash-image RTAS call output buffer contains 150 - 200 bytes of data on latest system. Presently we have output buffer size as 64 bytes and we use sprintf to copy data from RTAS buffer to local buffer. This causes kernel oops (see below call trace). This patch increases local buffer size to 256 and also uses snprintf instead of sprintf to copy data from RTAS buffer. Kernel call trace : ------------------- Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: nfs fscache lockd auth_rpcgss nfs_acl sunrpc fuse loop dm_mod ipv6 ipv6_lib usb_storage ehea(X) sr_mod qlge ses cdrom enclosure st be2net sg ext3 jbd mbcache usbhid hid ohci_hcd ehci_hcd usbcore qla2xxx usb_common sd_mod crc_t10dif scsi_dh_hp_sw scsi_dh_rdac scsi_dh_alua scsi_dh_emc scsi_dh lpfc scsi_transport_fc scsi_tgt ipr(X) libata scsi_mod Supported: Yes NIP: 4520323031333130 LR: 4520323031333130 CTR: 0000000000000000 REGS: c0000001b91779b0 TRAP: 0400 Tainted: G X (3.0.13-0.27-ppc64) MSR: 8000000040009032 <EE,ME,IR,DR> CR: 44022488 XER: 20000018 TASK = c0000001bca1aba0[4736] 'cat' THREAD: c0000001b9174000 CPU: 36 GPR00: 4520323031333130 c0000001b9177c30 c000000000f87c98 000000000000009b GPR04: c0000001b9177c4a 000000000000000b 3520323031333130 2032303133313031 GPR08: 3133313031350a4d 000000000000009b 0000000000000000 c0000000003664a4 GPR12: 0000000022022448 c000000003ee6c00 0000000000000002 00000000100e8a90 GPR16: 00000000100cb9d8 0000000010093370 000000001001d310 0000000000000000 GPR20: 0000000000008000 00000000100fae60 000000000000005e 0000000000000000 GPR24: 0000000010129350 46573738302e3030 2046573738302e30 300a4d4720323031 GPR28: 333130313520554e 4b4e4f574e0a4d47 2032303133313031 3520323031333130 NIP [4520323031333130] 0x4520323031333130 LR [4520323031333130] 0x4520323031333130 Call Trace: [c0000001b9177c30] [4520323031333130] 0x4520323031333130 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-